main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers op162gsz: viewers · Ray
op162gsz-etched.glb op162gsz: factory component page (tier=mfr) · Ray
op162gsz-etched.step op162gsz: factory component page (tier=mfr) · Ray
op162gsz-hero.glb op162gsz: hero GLB from the etched model (keeps the MPN mark) · Ray
op162gsz-hero.overlay.json op162gsz: hero GLB from the etched model (keeps the MPN mark) · Ray
op162gsz.glb Publish 0.1.0 · Ray
op162gsz.kicad_mod Publish 0.1.0 · Ray
op162gsz.kicad_sym Publish 0.1.0 · Ray
op162gsz.lbr Publish 0.1.0 · Ray
op162gsz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

OP162GSZ

Analog Devices · Precision OpAmps · SOIC-8

OP162GSZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NULL passive Offset null terminal; a potentiometer (recommended 20 kΩ) connected between Pins 1 and 8 with its wiper to VCC adjusts offset voltage, and the wiper must not be connected to VEE.
2 -IN A input Inverting input of amplifier A; the input voltage should be limited to ±6 V to avoid device damage, and the input current to less than 5 mA.
3 +IN A input Non-inverting input of amplifier A; the common-mode input range extends from ground to within 1 V of the positive supply.
4 V- power_in Negative power supply (VEE); the part operates from single supplies as low as 2.7 V or dual supplies up to ±6 V.
5 NC unconnected No connect; the pin is not connected internally.
6 OUT A output Amplifier A output with rail-to-rail swing and 30 mA typical source and sink drive; the output is not short-circuit protected and must not be forced beyond ±30 mA.
7 V+ power_in Positive power supply (VCC); the part operates from single supplies up to 12 V.
8 NULL passive Offset null terminal; the other end of the offset adjustment potentiometer connection between Pins 1 and 8.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset Voltage VOS 45 325 µV OP162G, OP262G, OP462G 3
Offset Voltage VOS 800 µV -40°C ≤ TA ≤ +125°C 3
Input Bias Current IB 360 600 nA 3
Input Bias Current IB 650 nA -40°C ≤ TA ≤ +125°C 3
Input Offset Current IOS 2.5 25 nA 3
Input Offset Current IOS 40 nA -40°C ≤ TA ≤ +125°C 3
Input Voltage Range VCM 0 4 V 3
Common-Mode Rejection CMRR 70 110 dB 0 V ≤ VCM ≤ 4.0 V, -40°C ≤ TA ≤ +125°C 3
Large Signal Voltage Gain AVO 30 V/mV RL = 2 kΩ, 0.5 ≤ VOUT ≤ 4.5 V 3
Large Signal Voltage Gain AVO 65 88 V/mV RL = 10 kΩ, 0.5 ≤ VOUT ≤ 4.5 V 3
Large Signal Voltage Gain AVO 40 V/mV RL = 10 kΩ, -40°C ≤ TA ≤ +125°C 3
Long-Term Offset Voltage VOS 600 µV G grade 3
Offset Voltage Drift ∆VOS/∆T 1 µV/°C 3
Bias Current Drift ∆IB/∆T 250 pA/°C 3
Output Voltage Swing High VOH 4.95 4.99 V IL = 250 µA, -40°C ≤ TA ≤ +125°C 3
Output Voltage Swing High VOH 4.85 4.94 V IL = 5 mA 3
Output Voltage Swing Low VOL 14 50 mV IL = 250 µA, -40°C ≤ TA ≤ +125°C 3
Output Voltage Swing Low VOL 65 150 mV IL = 5 mA 3
Short-Circuit Current ISC -80 80 mA Short to ground 3
Maximum Output Current IOUT -30 30 mA 3
Power Supply Rejection Ratio PSRR 120 dB VS = 2.7 V to 7 V 3
Power Supply Rejection Ratio PSRR 90 dB -40°C ≤ TA ≤ +125°C 3
Supply Current/Amplifier ISY 600 750 µA OP162, VOUT = 2.5 V 3
Supply Current/Amplifier ISY 1 mA OP162, -40°C ≤ TA ≤ +125°C 3
Slew Rate SR 10 V/µs 1 V < VOUT < 4 V, RL = 10 kΩ 3
Settling Time tS 540 ns To 0.1%, AV = -1, VO = 2 V step 3
Gain Bandwidth Product GBP 15 MHz 3
Phase Margin φm 61 Degrees 3
Voltage Noise en p-p 0.5 µV p-p 0.1 Hz to 10 Hz 3
Voltage Noise Density en 9.5 nV/√Hz f = 1 kHz 3
Current Noise Density in 0.4 pA/√Hz f = 1 kHz 3
Supply Voltage Range VS 3 12 V 5
Supply Voltage VS 6 V Absolute maximum, ±6 V 6
Input Voltage VIN 6 V Absolute maximum, ±6 V; limited to supply voltage above 6 V supplies 6
Differential Input Voltage VID 0.6 V Absolute maximum, ±0.6 V; input current limited to 5 mA above 0.6 V 6
Storage Temperature Range TSTORE -65 150 °C 6
Operating Temperature Range TA -40 125 °C 6
Junction Temperature Range TJ -65 150 °C 6
Lead Temperature Range 300 °C Soldering, 10 sec 6
Thermal Resistance Junction-to-Ambient θJA 157 °C/W 8-Lead SOIC (S) 6
Thermal Resistance Junction-to-Case θJC 56 °C/W 8-Lead SOIC (S) 6

CAD (KiCad official)

  • Symbol: OP162GSZ
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: op162gsz-etched.step / op162gsz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); op162gsz.step / op162gsz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 07ec7633d2004ae1, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF