OP162GSZ-REEL7

{
  "slug": "op162gsz-reel7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Precision Op Amps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "op162gsz-reel7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "op162gsz-reel7.kicad_sym",
    "op162gsz-reel7.kicad_mod",
    "op162gsz-reel7.glb",
    "op162gsz-reel7.step",
    "op162gsz-reel7.lbr",
    "docs/hero.png",
    "docs/op162gsz-reel7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "op162gsz-reel7-hero.glb",
    "op162gsz-reel7-hero.overlay.json",
    "op162gsz-reel7-etched.glb"
  ],
  "component": {
    "mpn": "OP162GSZ-REEL7",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Precision Op Amps",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589866465068687360",
    "parts": {
      "symbol": "op162gsz-reel7.kicad_sym",
      "footprint": "op162gsz-reel7.kicad_mod",
      "model_3d": "op162gsz-reel7-hero.glb",
      "model_3d_plain": "op162gsz-reel7-etched.glb",
      "model_3d_step": "op162gsz-reel7-etched.step",
      "model_3d_step_plain": "op162gsz-reel7.step",
      "lbr": "op162gsz-reel7.lbr"
    },
    "distributor_links": {
      "lcsc": "C690875",
      "digikey": "OP162GSZ-REEL7TR-ND",
      "mouser": "584-OP162GSZ-R7"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T07:38:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "OP162GSZ-REEL7TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "584-OP162GSZ-R7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NULL",
        "type": "passive",
        "description": "Offset null pin: a potentiometer (recommended 20 kΩ) can be connected between Pin 1 and Pin 8 for offset adjustment, and the wiper must go to VCC, never VEE, or the device can be damaged."
      },
      {
        "number": "2",
        "name": "-IN A",
        "type": "input",
        "description": "Inverting input of amplifier A; the input voltage should be limited to ±6 V and the input current to less than 5 mA to avoid damage."
      },
      {
        "number": "3",
        "name": "+IN A",
        "type": "input",
        "description": "Non-inverting input of amplifier A; the common-mode input range is 0 V to within 1 V of the positive supply, and the input voltage should be limited to ±6 V."
      },
      {
        "number": "4",
        "name": "V-",
        "type": "power_in",
        "description": "Negative power supply; the device operates from single supplies as low as 2.7 V or dual supplies up to ±6 V."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; the datasheet specifies no internal connection to this pin."
      },
      {
        "number": "6",
        "name": "OUT A",
        "type": "output",
        "description": "Amplifier A output, which swings to within 60 mV of each supply rail at 5 mA load and is not short-circuit protected, so the output current must be kept within ±30 mA."
      },
      {
        "number": "7",
        "name": "V+",
        "type": "power_in",
        "description": "Positive power supply; single-supply operation is specified from 2.7 V to 12 V."
      },
      {
        "number": "8",
        "name": "NULL",
        "type": "passive",
        "description": "Offset null pin: the second terminal for the optional offset-adjust potentiometer connected between Pin 1 and Pin 8."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet labels Pins 1 and 8 only as NULL (offset nulling) and gives no formal ERC class; 'pass"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0533,
        "at": "2026-10-19T07:36:30"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589866465068687360",
        "pages": 20,
        "sha256": "07ec7633d2004ae1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "op162gsz-reel7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "op162gsz-reel7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cacf19e0490861ff3cd902f2edd815cca15116246aaff4a6ec32ca2cfc21263f",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}