main
Ray Publish 0.1.0 9069dfd
{
  "slug": "onet1191vrgpt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Laser Drivers, QFN-20(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "onet1191vrgpt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "onet1191vrgpt.kicad_sym",
    "onet1191vrgpt.kicad_mod",
    "onet1191vrgpt.glb",
    "onet1191vrgpt.step",
    "onet1191vrgpt.lbr",
    "docs/hero.png",
    "docs/onet1191vrgpt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "onet1191vrgpt-hero.glb",
    "onet1191vrgpt-hero.overlay.json",
    "onet1191vrgpt-etched.glb"
  ],
  "component": {
    "mpn": "ONET1191VRGPT",
    "manufacturer": "Texas Instruments",
    "package": "QFN-20(4x4)",
    "pin_count": 21,
    "category": "Power Supply Chip",
    "subcategory": "Laser Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/onet1191vrgpt.pdf",
    "parts": {
      "symbol": "onet1191vrgpt.kicad_sym",
      "footprint": "onet1191vrgpt.kicad_mod",
      "model_3d": "onet1191vrgpt-hero.glb",
      "model_3d_plain": "onet1191vrgpt-etched.glb",
      "model_3d_step": "onet1191vrgpt-etched.step",
      "model_3d_step_plain": "onet1191vrgpt.step",
      "lbr": "onet1191vrgpt.lbr"
    },
    "distributor_links": {
      "lcsc": "C2653395",
      "digikey": "296-20681-2-ND",
      "mouser": "595-ONET1191VRGPT"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:46:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-20681-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-ONET1191VRGPT",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DIS",
        "type": "input",
        "description": "Disables both bias and modulation currents when set high, and toggling it resets a fault condition."
      },
      {
        "number": "2",
        "name": "RZTC",
        "type": "passive",
        "description": "An external zero-TC 28.7-kΩ resistor to ground sets a defined zero-TC reference current for the internal DACs."
      },
      {
        "number": "3",
        "name": "TS",
        "type": "output",
        "description": "Temperature sensor output, not buffered and drives capacitive loads only, with VTS = 8.2 mV/°C × TEMP + 1140 mV."
      },
      {
        "number": "4",
        "name": "SCK",
        "type": "input",
        "description": "Two-wire interface serial clock input with a 100-kΩ pullup resistor to VCC."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "input",
        "description": "Two-wire interface serial data input with a 100-kΩ pullup resistor to VCC."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Circuit ground."
      },
      {
        "number": "7",
        "name": "DIN+",
        "type": "input",
        "description": "Noninverted data input, on-chip differentially 100-Ω terminated to DIN-, must be ac-coupled."
      },
      {
        "number": "8",
        "name": "DIN–",
        "type": "input",
        "description": "Inverted data input, on-chip differentially 100-Ω terminated to DIN+, must be ac-coupled."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Circuit ground."
      },
      {
        "number": "10",
        "name": "FLT",
        "type": "output",
        "description": "Fault detection flag output."
      },
      {
        "number": "11",
        "name": "BGV",
        "type": "output",
        "description": "Buffered bandgap voltage with open emitter output, a replica of the RZTC bandgap voltage; use the same 28.7-kΩ resistor to GND as at RZTC for best matching."
      },
      {
        "number": "12",
        "name": "MONB",
        "type": "output",
        "description": "Bias current monitor sourcing a 3.3% replica of the bias current; a fault is triggered if the voltage exceeds 1.15 V, and about 0.8 V at the maximum desired bias current is typical."
      },
      {
        "number": "13",
        "name": "MONP",
        "type": "output",
        "description": "Photodiode current monitor sourcing a 50% replica when PDR = 1 and a 250% replica when PDR = 0, with an external resistor (5 kΩ typical) to ground."
      },
      {
        "number": "14",
        "name": "COMP",
        "type": "passive",
        "description": "Compensation pin controlling the APC loop bandwidth, requiring a 0.01-µF capacitor to ground."
      },
      {
        "number": "15",
        "name": "PD",
        "type": "passive",
        "description": "Photodiode input that sources or sinks current depending on PDP and supplies >1.5 V reverse bias."
      },
      {
        "number": "16",
        "name": "BIAS",
        "type": "passive",
        "description": "Sinks average VCSEL bias current in APC and open-loop modes and connects to the laser cathode through an inductor (BLM15HG102SN1D recommended)."
      },
      {
        "number": "17",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply pin for the 3.3-V ±10% supply voltage."
      },
      {
        "number": "18",
        "name": "MOD–",
        "type": "output",
        "description": "Inverted modulation current output, on-chip 55-Ω back-terminated to VCC."
      },
      {
        "number": "19",
        "name": "MOD+",
        "type": "output",
        "description": "Noninverted modulation current output, on-chip 55-Ω back-terminated to VCC."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply pin for the 3.3-V ±10% supply voltage."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The terminal table lists BGV's I/O type as 'Anolog-out' (typo); it was mapped to output. The pinout "
        ],
        "pages_sent": 8,
        "cost_usd": 0.0189,
        "at": "2026-10-28T15:46:22"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/onet1191vrgpt.pdf",
        "pages": 26,
        "sha256": "1b80b07193e25a7a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "onet1191vrgpt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9476a1612023de37f27b4972110ab6ac6dc0eaf5ac48957a2e1c497650082a5",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "onet1191vrgpt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "723ddf34ec24c81798dec4ba1021d192d612040ac4458d6e8282c833b37cbda7",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}