main
Ray Publish 0.1.0 d4f65d0
{
  "slug": "oc5038",
  "version": "0.1.0",
  "type": "component",
  "description": "OCX LED Drivers, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "oc5038",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "oc5038.kicad_sym",
    "oc5038.kicad_mod",
    "oc5038.glb",
    "oc5038.step",
    "oc5038.lbr",
    "docs/hero.png",
    "docs/oc5038-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "oc5038-hero.glb",
    "oc5038-hero.overlay.json"
  ],
  "component": {
    "mpn": "OC5038",
    "manufacturer": "OCX",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918078462185472",
    "parts": {
      "symbol": "oc5038.kicad_sym",
      "footprint": "oc5038.kicad_mod",
      "model_3d": "oc5038-hero.glb",
      "model_3d_plain": "oc5038.glb",
      "model_3d_step": "oc5038-etched.step",
      "model_3d_step_plain": "oc5038.step",
      "lbr": "oc5038.lbr"
    },
    "distributor_links": {
      "lcsc": "C842725"
    },
    "distributor_check": {
      "checked_at": "2026-10-09T20:36:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the controller; the datasheet gives no separate electrical limit for this pin."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally and to be left floating."
      },
      {
        "number": "3",
        "name": "DIM",
        "type": "input",
        "description": "Dimming input supporting PWM and linear dimming: pulling DIM to GND turns the LED output off, DIM above 3.1 V gives 100% output current, the linear dimming range is 1.1-3.1 V, and DIM must not be left floating (a capacitor of 10 nF or more to GND is recommended when linear dimming is used)."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "output",
        "description": "Switch pin connected to the drain of the internal 90 V MOS switch, with a maximum SW voltage of 90 V; the exposed heatsink pad is internally tied to this pin."
      },
      {
        "number": "5",
        "name": "CS",
        "type": "input",
        "description": "Inductor peak-current sense input connected to the current sense resistor, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV)."
      },
      {
        "number": "6",
        "name": "CS",
        "type": "input",
        "description": "Second inductor peak-current sense pin for the same current sense input, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV)."
      },
      {
        "number": "7",
        "name": "TOFF",
        "type": "input",
        "description": "Off-time setting pin where an external capacitor COFF sets the fixed off-time, and with no capacitor the internal off-time is 650 ns; the pin voltage is limited to -0.3 V to VDD+0.3 V."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Chip supply pin fed through a resistor RVDD, with an internal clamp at 5.5 V (maximum clamp current 10 mA) and an undervoltage lockout at 2.6 V rising with 0.4 V hysteresis."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed heatsink (thermal) pad is listed in the datasheet pin table as '-' with no number, so it; Pins 5 and 6 are both named CS in the datasheet and are both listed as current-sense inputs; they ar; Pin types for SW (output) and NC (unconnected) are inferred from their functions, since the datashee",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0343,
        "at": "2026-10-09T20:33:38"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918078462185472",
        "pages": 7,
        "sha256": "99cbec4393f8a6ec",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "oc5038.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "oc5038-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bb6bcf392d8837bd6b0f5f9034610b718169a892075e61734692381679631083",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}