Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OC5038

OCX · LED Drivers · ESOP-8

OC5038 from OCX, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin for the controller; the datasheet gives no separate electrical limit for this pin.
2 NC unconnected Not connected internally and to be left floating.
3 DIM input Dimming input supporting PWM and linear dimming: pulling DIM to GND turns the LED output off, DIM above 3.1 V gives 100% output current, the linear dimming range is 1.1-3.1 V, and DIM must not be left floating (a capacitor of 10 nF or more to GND is recommended when linear dimming is used).
4 SW output Switch pin connected to the drain of the internal 90 V MOS switch, with a maximum SW voltage of 90 V; the exposed heatsink pad is internally tied to this pin.
5 CS input Inductor peak-current sense input connected to the current sense resistor, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV).
6 CS input Second inductor peak-current sense pin for the same current sense input, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV).
7 TOFF input Off-time setting pin where an external capacitor COFF sets the fixed off-time, and with no capacitor the internal off-time is 650 ns; the pin voltage is limited to -0.3 V to VDD+0.3 V.
8 VDD power_in Chip supply pin fed through a resistor RVDD, with an internal clamp at 5.5 V (maximum clamp current 10 mA) and an undervoltage lockout at 2.6 V rising with 0.4 V hysteresis.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer OCX
Package ESOP-8
Category Nixie Tube Driver/LED Driver
Pins 9

CAD (KiCad official)

  • Symbol: OC5038
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: oc5038-etched.step / oc5038-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); oc5038.step / oc5038.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OCX datasheet (7 pp, sha256 99cbec4393f8a6ec, retrieved 2026-10-09, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF