main
Ray
Publish 0.1.0
d4f65d0
OC5038
OCX · LED Drivers · ESOP-8
OC5038 from OCX, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the controller; the datasheet gives no separate electrical limit for this pin. |
| 2 | NC | unconnected | Not connected internally and to be left floating. |
| 3 | DIM | input | Dimming input supporting PWM and linear dimming: pulling DIM to GND turns the LED output off, DIM above 3.1 V gives 100% output current, the linear dimming range is 1.1-3.1 V, and DIM must not be left floating (a capacitor of 10 nF or more to GND is recommended when linear dimming is used). |
| 4 | SW | output | Switch pin connected to the drain of the internal 90 V MOS switch, with a maximum SW voltage of 90 V; the exposed heatsink pad is internally tied to this pin. |
| 5 | CS | input | Inductor peak-current sense input connected to the current sense resistor, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV). |
| 6 | CS | input | Second inductor peak-current sense pin for the same current sense input, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV). |
| 7 | TOFF | input | Off-time setting pin where an external capacitor COFF sets the fixed off-time, and with no capacitor the internal off-time is 650 ns; the pin voltage is limited to -0.3 V to VDD+0.3 V. |
| 8 | VDD | power_in | Chip supply pin fed through a resistor RVDD, with an internal clamp at 5.5 V (maximum clamp current 10 mA) and an undervoltage lockout at 2.6 V rising with 0.4 V hysteresis. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OCX |
| Package | ESOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
OC5038 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
oc5038-etched.step/oc5038-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);oc5038.step/oc5038.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OCX datasheet (7 pp, sha256
99cbec4393f8a6ec, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OC5038
**OCX** · LED Drivers · ESOP-8
OC5038 from OCX, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the controller; the datasheet gives no separate electrical limit for this pin. |
| 2 | NC | unconnected | Not connected internally and to be left floating. |
| 3 | DIM | input | Dimming input supporting PWM and linear dimming: pulling DIM to GND turns the LED output off, DIM above 3.1 V gives 100% output current, the linear dimming range is 1.1-3.1 V, and DIM must not be left floating (a capacitor of 10 nF or more to GND is recommended when linear dimming is used). |
| 4 | SW | output | Switch pin connected to the drain of the internal 90 V MOS switch, with a maximum SW voltage of 90 V; the exposed heatsink pad is internally tied to this pin. |
| 5 | CS | input | Inductor peak-current sense input connected to the current sense resistor, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV). |
| 6 | CS | input | Second inductor peak-current sense pin for the same current sense input, with a sense threshold VCS_TH of 245-265 mV (typical 255 mV). |
| 7 | TOFF | input | Off-time setting pin where an external capacitor COFF sets the fixed off-time, and with no capacitor the internal off-time is 650 ns; the pin voltage is limited to -0.3 V to VDD+0.3 V. |
| 8 | VDD | power_in | Chip supply pin fed through a resistor RVDD, with an internal clamp at 5.5 V (maximum clamp current 10 mA) and an undervoltage lockout at 2.6 V rising with 0.4 V hysteresis. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OCX |
| Package | ESOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 9 |
## CAD (KiCad official)
- Symbol: `OC5038`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`
- 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files: `oc5038-etched.step` / `oc5038-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `oc5038.step` / `oc5038.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [OCX datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918078462185472) (7 pp, sha256 `99cbec4393f8a6ec`, retrieved 2026-10-09, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/oc5038-datasheet.pdf)