main
Ray
obgz11mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
08905fd
OBGZ11MP
OB On Bright Elec · AC-DC Controllers and Regulators · SOT-23-6
OBGZ11MP from OB On Bright Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground reference. |
| 2 | FB | input | Feedback input pin. The PWM duty cycle is determined by the voltage level into this pin and the current-sense signal at Pin CS. Open loop OLP threshold ~4.4 V; input impedance ~30 kΩ. |
| 3 | PRT | input | Dual-function protection pin. Connect an NTC resistor to GND for external OTP detection; a resistor from Vaux adjusts the OVP trigger voltage. If both OTP and OVP are used, a diode should be connected between PRT and the NTC resistor. Absolute max input -0.3 to 7 V. |
| 4 | CS | input | Current sense input from the MOSFET source resistor. Internal current-limit threshold ~0.45 V (zero duty cycle); leading-edge blanking ~300 ns; OCP clamp ~0.72 V. |
| 5 | VCC | power_in | Power supply input. Recommended operating range 12 to 26 V. UVLO(ON) ~7.3 V, UVLO(OFF)/recovery ~16.2 V, OVP threshold ~28 V. Startup current ~2 µA, operating current ~2.5 mA. |
| 6 | Gate | output | Totem-pole gate driver output for the external power MOSFET. Includes soft-start on power-up to reduce MOSFET Vds stress. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
OBGZ11MP
CAD (KiCad official)
- Symbol:
OBGZ11MP - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
obgz11mp-etched.step/obgz11mp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);obgz11mp.step/obgz11mp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB On Bright Elec datasheet (11 pp, sha256
b1ce23de1607ab0b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OBGZ11MP
**OB On Bright Elec** · AC-DC Controllers and Regulators · SOT-23-6
OBGZ11MP from OB On Bright Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground reference. |
| 2 | FB | input | Feedback input pin. The PWM duty cycle is determined by the voltage level into this pin and the current-sense signal at Pin CS. Open loop OLP threshold ~4.4 V; input impedance ~30 kΩ. |
| 3 | PRT | input | Dual-function protection pin. Connect an NTC resistor to GND for external OTP detection; a resistor from Vaux adjusts the OVP trigger voltage. If both OTP and OVP are used, a diode should be connected between PRT and the NTC resistor. Absolute max input -0.3 to 7 V. |
| 4 | CS | input | Current sense input from the MOSFET source resistor. Internal current-limit threshold ~0.45 V (zero duty cycle); leading-edge blanking ~300 ns; OCP clamp ~0.72 V. |
| 5 | VCC | power_in | Power supply input. Recommended operating range 12 to 26 V. UVLO(ON) ~7.3 V, UVLO(OFF)/recovery ~16.2 V, OVP threshold ~28 V. Startup current ~2 µA, operating current ~2.5 mA. |
| 6 | Gate | output | Totem-pole gate driver output for the external power MOSFET. Includes soft-start on power-up to reduce MOSFET Vds stress. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `OBGZ11MP`
## CAD (KiCad official)
- Symbol: `OBGZ11MP`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `obgz11mp-etched.step` / `obgz11mp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `obgz11mp.step` / `obgz11mp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [OB On Bright Elec datasheet](docs/obgz11mp-datasheet.pdf) (11 pp, sha256 `b1ce23de1607ab0b`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/obgz11mp-datasheet.pdf)