main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs obgz11mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers obgz11mp: viewers · Ray
obgz11mp-etched.fit.json obgz11mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
obgz11mp-etched.glb obgz11mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
obgz11mp-etched.step obgz11mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
obgz11mp.glb Publish 0.1.0 · Ray
obgz11mp.kicad_mod Publish 0.1.0 · Ray
obgz11mp.kicad_sym Publish 0.1.0 · Ray
obgz11mp.lbr Publish 0.1.0 · Ray
obgz11mp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json obgz11mp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md obgz11mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray

OBGZ11MP

OB On Bright Elec · AC-DC Controllers and Regulators · SOT-23-6

OBGZ11MP from OB On Bright Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground reference.
2 FB input Feedback input pin. The PWM duty cycle is determined by the voltage level into this pin and the current-sense signal at Pin CS. Open loop OLP threshold ~4.4 V; input impedance ~30 kΩ.
3 PRT input Dual-function protection pin. Connect an NTC resistor to GND for external OTP detection; a resistor from Vaux adjusts the OVP trigger voltage. If both OTP and OVP are used, a diode should be connected between PRT and the NTC resistor. Absolute max input -0.3 to 7 V.
4 CS input Current sense input from the MOSFET source resistor. Internal current-limit threshold ~0.45 V (zero duty cycle); leading-edge blanking ~300 ns; OCP clamp ~0.72 V.
5 VCC power_in Power supply input. Recommended operating range 12 to 26 V. UVLO(ON) ~7.3 V, UVLO(OFF)/recovery ~16.2 V, OVP threshold ~28 V. Startup current ~2 µA, operating current ~2.5 mA.
6 Gate output Totem-pole gate driver output for the external power MOSFET. Includes soft-start on power-up to reduce MOSFET Vds stress.

Key specifications

Parameter Value
Manufacturer OB On Bright Elec
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • OBGZ11MP

CAD (KiCad official)

  • Symbol: OBGZ11MP
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: obgz11mp-etched.step / obgz11mp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); obgz11mp.step / obgz11mp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OB On Bright Elec datasheet (11 pp, sha256 b1ce23de1607ab0b, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF