main
History Download
Ray Publish 0.1.0 5c7d921

OB5510CIP

OB(On-Bright Elec) · Other Processors and Microcontrollers (MCUs) · SOP-20-300mil

OB5510CIP from OB(On-Bright Elec), in a SOP-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OCISCL/IICSCL/T0/P1.2 bidirectional Port 1 bit 2 pin multiplexed as OCIS clock, I2C clock (IICSCL), and Timer 0 input; port mode is set per pin by PxM1/PxM0 (quasi-bidirectional, push-pull, input-only or open-drain).
2 P1.1/RXD/T2EX bidirectional Port 1 bit 1 pin multiplexed as UART receive (RXD) and Timer 2 external reload/trigger (T2EX); port mode is set per pin by PxM1/PxM0.
3 P1.0/TXD bidirectional Port 1 bit 0 pin multiplexed as UART transmit (TXD); port mode is set per pin by PxM1/PxM0.
4 P0.7/T1/ADC7/CC3/PWM3 bidirectional Port 0 bit 7 pin multiplexed as Timer 1 input (T1), ADC channel 7, capture/compare CC3 and PWM3; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package.
5 P0.6/ADC6/Cmp0out bidirectional Port 0 bit 6 pin multiplexed as ADC channel 6 and comparator 0 output (Cmp0out); port mode is set per pin by PxM1/PxM0.
6 LDO_5V power_out Integrated 5V LDO output; the datasheet states 5V ±2% at 25°C, ±4% from -40°C to 85°C, with a maximum output current of 200mA.
7 VSS power_in Ground reference pin for the device.
8 VIN power_in Regulator input feeding the integrated 5V LDO; the datasheet gives the absolute maximum for all pins other than VDD and OD0-OD4 as -0.3V to 7V, but no separate VIN operating range.
9 VDD power_in Main power supply input, specified at 7.5V to 12V; absolute maximum rating for VDD is -0.3V to 20V.
10 OD0 output Open-drain output 0 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V.
11 OD1 output Open-drain output 1 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V.
12 OD2 output Open-drain output 2 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V.
13 OD3 output Open-drain output 3 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V.
14 OD4 output Open-drain output 4 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V.
15 Cmp1out/ADC0/SPICLK/KB10/P0.0 bidirectional Port 0 bit 0 pin multiplexed as comparator 1 output (Cmp1out), ADC channel 0, SPI clock (SPICLK) and keyboard input KB10; port mode is set per pin by PxM1/PxM0.
16 PWM0/MIS0/CC1/P1.6 bidirectional Port 1 bit 6 pin multiplexed as PWM0, MIS0 and capture/compare CC1; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package.
17 XTAL1/P3.1 bidirectional Port 3 bit 1 pin multiplexed as crystal oscillator input XTAL1; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package.
18 CLKOUT/XTAL2/P3.0 bidirectional Port 3 bit 0 pin multiplexed as clock output (CLKOUT) and crystal oscillator output XTAL2; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package.
19 SS/INT1/P1.4 bidirectional Port 1 bit 4 pin multiplexed as SPI slave select (SS) and external interrupt 1 (INT1); port mode is set per pin by PxM1/PxM0.
20 OCISDA/IICSDA/INT0/P1.3 bidirectional Port 1 bit 3 pin multiplexed as OCIS data, I2C data (IICSDA) and external interrupt 0 (INT0); port mode is set per pin by PxM1/PxM0.

Key specifications

Parameter Value
Manufacturer OB(On-Bright Elec)
Package SOP-20-300mil
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC supply voltage (VDD) absolute maximum VDD -0.3 20 V 71
Storage temperature TS -55 150 ℃ 71
Operating ambient temperature TA -40 25 85 ℃ Ambient temperature under bias 71
Operating voltage (VDD) VDD 7.5 9 12 V 71
Chip start-up voltage VDD(ON) 6.5 7 7.5 V VDD 电压从0V 开始上升,芯片开始工作 71
Chip shut-off voltage VDD(OFF) 5.1 5.4 5.7 V VDD 从9V 开始下降,芯片停止工作 71
LDO output voltage V_LDO 4.9 5 5.1 V IOUT =200mA, TA =25℃ 71
LDO output voltage incl. temperature variation V_LDO 4.8 5 5.2 V IOUT =200mA, TA =-40℃至85℃ 71
LDO output current 1 IOUT1 200 mA LDO 输入电压大于6.5V 71
LDO output current 2 (low-power mode) IOUT2 200 uA LDO 进入低功耗模式 71
LDO input voltage VIN 6.5 12 V 71
LDO static current 1 (high-power mode) ISS1 300 400 uA LDO 高功耗模式 71
LDO static current 2 (low-power mode) ISS2 30 40 uA LDO 低功耗模式 71
LDO setup time TSET 20 mS LDO 外接100uF 电容,8V< VIN<12V 71
OD0-OD4 sink current capability IOUT 80 mA Vin=9V ,VOL=GND+0.8V 71
AN5V/9V input divider resistor ratio error R -1 0 1 % 标准分压为 VIN/3.6,V_LDO/2 71
Maximum power dissipation (LDO) ∆PMAX 0.6 W LDO 的最大功耗 71
Input low-voltage (Px.x) VIL1 -0.5 V Vcc=5V 72
Input leakage current (Px.x, SCL, SDA) ILI -10 10 uA 0.45V<Vi<Vcc 72
LDO ripple rejection ratio RR 50 db F=100Hz 71
LDO load regulation ∆VO1 60 mV VIN=9V,1mA <IOUT <200mA 71
LDO line regulation ∆VO2 30 mV IOUT =100mA, 8V< VIN<12V 71

CAD (KiCad official)

  • Symbol: OB5510CIP
  • Footprint: Package_SO:SOP-20_7.5x12.8mm_P1.27mm
  • 3D model: SOP-20-300mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: ob5510cip-etched.step / ob5510cip-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ob5510cip.step / ob5510cip.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OB(On-Bright Elec) datasheet (75 pp, sha256 a8b5612bfdda2597, retrieved 2026-10-30, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF