Generated by kicad-footprint-generator · KiCad file format 20260206
OB5510CIP
OB(On-Bright Elec) · Other Processors and Microcontrollers (MCUs) · SOP-20-300mil
OB5510CIP from OB(On-Bright Elec), in a SOP-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OCISCL/IICSCL/T0/P1.2 | bidirectional | Port 1 bit 2 pin multiplexed as OCIS clock, I2C clock (IICSCL), and Timer 0 input; port mode is set per pin by PxM1/PxM0 (quasi-bidirectional, push-pull, input-only or open-drain). |
| 2 | P1.1/RXD/T2EX | bidirectional | Port 1 bit 1 pin multiplexed as UART receive (RXD) and Timer 2 external reload/trigger (T2EX); port mode is set per pin by PxM1/PxM0. |
| 3 | P1.0/TXD | bidirectional | Port 1 bit 0 pin multiplexed as UART transmit (TXD); port mode is set per pin by PxM1/PxM0. |
| 4 | P0.7/T1/ADC7/CC3/PWM3 | bidirectional | Port 0 bit 7 pin multiplexed as Timer 1 input (T1), ADC channel 7, capture/compare CC3 and PWM3; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package. |
| 5 | P0.6/ADC6/Cmp0out | bidirectional | Port 0 bit 6 pin multiplexed as ADC channel 6 and comparator 0 output (Cmp0out); port mode is set per pin by PxM1/PxM0. |
| 6 | LDO_5V | power_out | Integrated 5V LDO output; the datasheet states 5V ±2% at 25°C, ±4% from -40°C to 85°C, with a maximum output current of 200mA. |
| 7 | VSS | power_in | Ground reference pin for the device. |
| 8 | VIN | power_in | Regulator input feeding the integrated 5V LDO; the datasheet gives the absolute maximum for all pins other than VDD and OD0-OD4 as -0.3V to 7V, but no separate VIN operating range. |
| 9 | VDD | power_in | Main power supply input, specified at 7.5V to 12V; absolute maximum rating for VDD is -0.3V to 20V. |
| 10 | OD0 | output | Open-drain output 0 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V. |
| 11 | OD1 | output | Open-drain output 1 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V. |
| 12 | OD2 | output | Open-drain output 2 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V. |
| 13 | OD3 | output | Open-drain output 3 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V. |
| 14 | OD4 | output | Open-drain output 4 with 80mA sink capability and an internal freewheeling diode; absolute maximum -0.3V to 40V. |
| 15 | Cmp1out/ADC0/SPICLK/KB10/P0.0 | bidirectional | Port 0 bit 0 pin multiplexed as comparator 1 output (Cmp1out), ADC channel 0, SPI clock (SPICLK) and keyboard input KB10; port mode is set per pin by PxM1/PxM0. |
| 16 | PWM0/MIS0/CC1/P1.6 | bidirectional | Port 1 bit 6 pin multiplexed as PWM0, MIS0 and capture/compare CC1; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package. |
| 17 | XTAL1/P3.1 | bidirectional | Port 3 bit 1 pin multiplexed as crystal oscillator input XTAL1; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package. |
| 18 | CLKOUT/XTAL2/P3.0 | bidirectional | Port 3 bit 0 pin multiplexed as clock output (CLKOUT) and crystal oscillator output XTAL2; port mode is set per pin by PxM1/PxM0. This pin is not present on the SOP16 package. |
| 19 | SS/INT1/P1.4 | bidirectional | Port 1 bit 4 pin multiplexed as SPI slave select (SS) and external interrupt 1 (INT1); port mode is set per pin by PxM1/PxM0. |
| 20 | OCISDA/IICSDA/INT0/P1.3 | bidirectional | Port 1 bit 3 pin multiplexed as OCIS data, I2C data (IICSDA) and external interrupt 0 (INT0); port mode is set per pin by PxM1/PxM0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB(On-Bright Elec) |
| Package | SOP-20-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage (VDD) absolute maximum | VDD | -0.3 | 20 | V | 71 | ||
| Storage temperature | TS | -55 | 150 | ℃ | 71 | ||
| Operating ambient temperature | TA | -40 | 25 | 85 | ℃ | Ambient temperature under bias | 71 |
| Operating voltage (VDD) | VDD | 7.5 | 9 | 12 | V | 71 | |
| Chip start-up voltage | VDD(ON) | 6.5 | 7 | 7.5 | V | VDD 电压从0V 开始上升,芯片开始工作 | 71 |
| Chip shut-off voltage | VDD(OFF) | 5.1 | 5.4 | 5.7 | V | VDD 从9V 开始下降,芯片停止工作 | 71 |
| LDO output voltage | V_LDO | 4.9 | 5 | 5.1 | V | IOUT =200mA, TA =25℃ | 71 |
| LDO output voltage incl. temperature variation | V_LDO | 4.8 | 5 | 5.2 | V | IOUT =200mA, TA =-40℃至85℃ | 71 |
| LDO output current 1 | IOUT1 | 200 | mA | LDO 输入电压大于6.5V | 71 | ||
| LDO output current 2 (low-power mode) | IOUT2 | 200 | uA | LDO 进入低功耗模式 | 71 | ||
| LDO input voltage | VIN | 6.5 | 12 | V | 71 | ||
| LDO static current 1 (high-power mode) | ISS1 | 300 | 400 | uA | LDO 高功耗模式 | 71 | |
| LDO static current 2 (low-power mode) | ISS2 | 30 | 40 | uA | LDO 低功耗模式 | 71 | |
| LDO setup time | TSET | 20 | mS | LDO 外接100uF 电容,8V< VIN<12V | 71 | ||
| OD0-OD4 sink current capability | IOUT | 80 | mA | Vin=9V ,VOL=GND+0.8V | 71 | ||
| AN5V/9V input divider resistor ratio error | R | -1 | 0 | 1 | % | 标准分压为 VIN/3.6,V_LDO/2 | 71 |
| Maximum power dissipation (LDO) | ∆PMAX | 0.6 | W | LDO 的最大功耗 | 71 | ||
| Input low-voltage (Px.x) | VIL1 | -0.5 | V | Vcc=5V | 72 | ||
| Input leakage current (Px.x, SCL, SDA) | ILI | -10 | 10 | uA | 0.45V<Vi<Vcc | 72 | |
| LDO ripple rejection ratio | RR | 50 | db | F=100Hz | 71 | ||
| LDO load regulation | ∆VO1 | 60 | mV | VIN=9V,1mA <IOUT <200mA | 71 | ||
| LDO line regulation | ∆VO2 | 30 | mV | IOUT =100mA, 8V< VIN<12V | 71 |
CAD (KiCad official)
- Symbol:
OB5510CIP - Footprint:
Package_SO:SOP-20_7.5x12.8mm_P1.27mm - 3D model: SOP-20-300mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
ob5510cip-etched.step/ob5510cip-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob5510cip.step/ob5510cip.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB(On-Bright Elec) datasheet (75 pp, sha256
a8b5612bfdda2597, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).