main
History Download
Ray Publish 0.1.0 bc34f60

OB3335TJPA-J

OB(On-Bright Elec) · LED Drivers · SOP-8

OB3335TJPA-J from OB(On-Bright Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input; recommended VDD is 8 to 16V, absolute maximum is -0.3 to 20V, and an internal clamp limits VDD to about 16V.
2 DIM bidirectional Dimming control input that senses the phase-cut mains voltage to set the error amplifier reference; FB/DIM input voltage is limited to -0.3 to 7V.
3 FB bidirectional Output over-voltage protection and demagnetization detect pin; the OVP threshold is about 2V (typical) and FB/DIM input voltage is limited to -0.3 to 7V.
4 CS bidirectional Current sense terminal for the sense resistor connected to GND; CS input voltage is limited to -0.3 to 7V and the cycle-by-cycle OCP threshold is 1V in normal operation (0.5V during LED short).
5 DRAIN bidirectional Drain of the internal power MOSFET; absolute maximum drain voltage for the OB3335TJPA-J is -0.3 to 500V.
6 DRAIN bidirectional Drain of the internal power MOSFET (pin 6 is tied to the same drain as pin 5); absolute maximum drain voltage for the OB3335TJPA-J is -0.3 to 500V.
7 GND power_in Power ground; the CS sense resistor Rcs is connected between the CS pin and this GND pin.
8 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer OB(On-Bright Elec)
Package SOP-8
Category LED Drivers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Start up current I start-up 136 170 204 uA VDD=UVLO(OFF)-1V 5
Output Over Voltage Protection Vth_ovp 1.9 2 2.1 V 5
Maximum Off Time Toff_max 30 35 40 us 5
Maximum On Time Ton_max 11 12 13 us 5
Error Amplifier Reference Voltage Vref 0.196 0.2 0.204 V 5
Operation current I op 350 420 uA VDD=14V, no loading 5
VDD clamp current IVDD_clamp 30 35 mA 5
VDD under voltage lockout exit UVLO(OFF) 13 V 5
VDD under voltage lockout enter UVLO(ON) 6.5 V 5
VDD CLAMP VDD current VDD_clamp 16 V 1mA 5
LEB time TLEB 0.4 us 5
Over Current Threshold at Normal operation Vth_ocp1 1 V Normal operation 5
Over Current Threshold at LED short Vth_ocp2 0.5 V LED short 5
Maximum Working Frequency Fmax 600 KHz 5
Minimum Off Time Toff_min 2 us 5
Over temperature protection OTP 165 ℃ 5
Over temperature hysteresis Hysteresis 50 ℃ 5
Thermal regulation threshold TTF 140 ℃ 5
VDD Supply Voltage VDD 8 16 V 2
VDD Voltage VDD -0.3 20 V 2
CS Input Voltage CS -0.3 7 V 2
FB/DIM Input Voltage FB/DIM -0.3 7 V 2
Drain voltage (OB3335TJPA-J) -0.3 500 V OB3335TJPA-J 2
Min/Max Operating Junction Temperature TJ -40 150 ℃ 2
Operating Ambient Temperature TA -40 85 ℃ 2
Min/Max Storage Temperature Tstg -55 150 ℃ 2
Lead Temperature (Soldering) 260 ℃ 10 secs 2
Package thermal resistance junction-to-ambient RθJA 95 ℃/W SOP7 package 2

CAD (KiCad official)

  • Symbol: OB3335TJPA-J
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ob3335tjpa-j-etched.step / ob3335tjpa-j-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ob3335tjpa-j.step / ob3335tjpa-j.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OB(On-Bright Elec) datasheet (10 pp, sha256 25afee80ccff0041, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF