3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOB3335TJPA-J
OB(On-Bright Elec) · LED Drivers · SOP-8
OB3335TJPA-J from OB(On-Bright Elec), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; recommended VDD is 8 to 16V, absolute maximum is -0.3 to 20V, and an internal clamp limits VDD to about 16V. |
| 2 | DIM | bidirectional | Dimming control input that senses the phase-cut mains voltage to set the error amplifier reference; FB/DIM input voltage is limited to -0.3 to 7V. |
| 3 | FB | bidirectional | Output over-voltage protection and demagnetization detect pin; the OVP threshold is about 2V (typical) and FB/DIM input voltage is limited to -0.3 to 7V. |
| 4 | CS | bidirectional | Current sense terminal for the sense resistor connected to GND; CS input voltage is limited to -0.3 to 7V and the cycle-by-cycle OCP threshold is 1V in normal operation (0.5V during LED short). |
| 5 | DRAIN | bidirectional | Drain of the internal power MOSFET; absolute maximum drain voltage for the OB3335TJPA-J is -0.3 to 500V. |
| 6 | DRAIN | bidirectional | Drain of the internal power MOSFET (pin 6 is tied to the same drain as pin 5); absolute maximum drain voltage for the OB3335TJPA-J is -0.3 to 500V. |
| 7 | GND | power_in | Power ground; the CS sense resistor Rcs is connected between the CS pin and this GND pin. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB(On-Bright Elec) |
| Package | SOP-8 |
| Category | LED Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Start up current | I start-up | 136 | 170 | 204 | uA | VDD=UVLO(OFF)-1V | 5 |
| Output Over Voltage Protection | Vth_ovp | 1.9 | 2 | 2.1 | V | 5 | |
| Maximum Off Time | Toff_max | 30 | 35 | 40 | us | 5 | |
| Maximum On Time | Ton_max | 11 | 12 | 13 | us | 5 | |
| Error Amplifier Reference Voltage | Vref | 0.196 | 0.2 | 0.204 | V | 5 | |
| Operation current | I op | 350 | 420 | uA | VDD=14V, no loading | 5 | |
| VDD clamp current | IVDD_clamp | 30 | 35 | mA | 5 | ||
| VDD under voltage lockout exit | UVLO(OFF) | 13 | V | 5 | |||
| VDD under voltage lockout enter | UVLO(ON) | 6.5 | V | 5 | |||
| VDD CLAMP VDD current | VDD_clamp | 16 | V | 1mA | 5 | ||
| LEB time | TLEB | 0.4 | us | 5 | |||
| Over Current Threshold at Normal operation | Vth_ocp1 | 1 | V | Normal operation | 5 | ||
| Over Current Threshold at LED short | Vth_ocp2 | 0.5 | V | LED short | 5 | ||
| Maximum Working Frequency | Fmax | 600 | KHz | 5 | |||
| Minimum Off Time | Toff_min | 2 | us | 5 | |||
| Over temperature protection | OTP | 165 | ℃ | 5 | |||
| Over temperature hysteresis | Hysteresis | 50 | ℃ | 5 | |||
| Thermal regulation threshold | TTF | 140 | ℃ | 5 | |||
| VDD Supply Voltage | VDD | 8 | 16 | V | 2 | ||
| VDD Voltage | VDD | -0.3 | 20 | V | 2 | ||
| CS Input Voltage | CS | -0.3 | 7 | V | 2 | ||
| FB/DIM Input Voltage | FB/DIM | -0.3 | 7 | V | 2 | ||
| Drain voltage (OB3335TJPA-J) | -0.3 | 500 | V | OB3335TJPA-J | 2 | ||
| Min/Max Operating Junction Temperature | TJ | -40 | 150 | ℃ | 2 | ||
| Operating Ambient Temperature | TA | -40 | 85 | ℃ | 2 | ||
| Min/Max Storage Temperature | Tstg | -55 | 150 | ℃ | 2 | ||
| Lead Temperature (Soldering) | 260 | ℃ | 10 secs | 2 | |||
| Package thermal resistance junction-to-ambient | RθJA | 95 | ℃/W | SOP7 package | 2 |
CAD (KiCad official)
- Symbol:
OB3335TJPA-J - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ob3335tjpa-j-etched.step/ob3335tjpa-j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob3335tjpa-j.step/ob3335tjpa-j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB(On-Bright Elec) datasheet (10 pp, sha256
25afee80ccff0041, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).