main
Ray
ob2632mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
b16ed09
OB2632MP
OB On Bright Elec · AC-DC Controllers and Regulators · SOT-23-6
OB2632MP from OB On Bright Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the controller. |
| 2 | FB | input | Feedback input pin. PWM duty cycle is determined by the voltage on this pin together with the current-sense signal at CS. Typically driven by an optocoupler from the secondary-side regulator. |
| 3 | PRT | input | Multi-function protection pin. Connect an NTC resistor to GND for OTP detection; a resistor from Vaux sets the IOVP/ISCP trigger current and enables transformer core demagnetization detection. If both OTP and OVP/SCP are needed, place a diode between the PRT pin and the NTC resistor. Absolute-max input voltage -0.3 V to 7 V. |
| 4 | CS | input | Current-sense input from the power MOSFET source resistor. Absolute-max input voltage -0.3 V to 7 V. |
| 5 | VDD | power_in | Chip supply pin. Recommended VCC supply range 12 V to 50 V; absolute max 54 V. Provides bias for the internal blocks and gate driver. |
| 6 | Gate | output | Totem-pole gate driver output for the external power MOSFET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
OB2632MPOB2632CPOB2632CPA
CAD (KiCad official)
- Symbol:
OB2632MP - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ob2632mp-etched.step/ob2632mp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob2632mp.step/ob2632mp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB On Bright Elec datasheet (17 pp, sha256
b7f2b49381b3d36f, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# OB2632MP
**OB On Bright Elec** · AC-DC Controllers and Regulators · SOT-23-6
OB2632MP from OB On Bright Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the controller. |
| 2 | FB | input | Feedback input pin. PWM duty cycle is determined by the voltage on this pin together with the current-sense signal at CS. Typically driven by an optocoupler from the secondary-side regulator. |
| 3 | PRT | input | Multi-function protection pin. Connect an NTC resistor to GND for OTP detection; a resistor from Vaux sets the IOVP/ISCP trigger current and enables transformer core demagnetization detection. If both OTP and OVP/SCP are needed, place a diode between the PRT pin and the NTC resistor. Absolute-max input voltage -0.3 V to 7 V. |
| 4 | CS | input | Current-sense input from the power MOSFET source resistor. Absolute-max input voltage -0.3 V to 7 V. |
| 5 | VDD | power_in | Chip supply pin. Recommended VCC supply range 12 V to 50 V; absolute max 54 V. Provides bias for the internal blocks and gate driver. |
| 6 | Gate | output | Totem-pole gate driver output for the external power MOSFET. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB On Bright Elec |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `OB2632MP`
- `OB2632CP`
- `OB2632CPA`
## CAD (KiCad official)
- Symbol: `OB2632MP`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ob2632mp-etched.step` / `ob2632mp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ob2632mp.step` / `ob2632mp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [OB On Bright Elec datasheet](docs/ob2632mp-datasheet.pdf) (17 pp, sha256 `b7f2b49381b3d36f`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ob2632mp-datasheet.pdf)