main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ob2632mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ob2632mp: viewers · Ray
ob2632mp-etched.fit.json ob2632mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ob2632mp-etched.glb ob2632mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ob2632mp-etched.step ob2632mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ob2632mp.glb Publish 0.1.0 · Ray
ob2632mp.kicad_mod Publish 0.1.0 · Ray
ob2632mp.kicad_sym Publish 0.1.0 · Ray
ob2632mp.lbr Publish 0.1.0 · Ray
ob2632mp.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json ob2632mp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md ob2632mp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray

OB2632MP

OB On Bright Elec · AC-DC Controllers and Regulators · SOT-23-6

OB2632MP from OB On Bright Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the controller.
2 FB input Feedback input pin. PWM duty cycle is determined by the voltage on this pin together with the current-sense signal at CS. Typically driven by an optocoupler from the secondary-side regulator.
3 PRT input Multi-function protection pin. Connect an NTC resistor to GND for OTP detection; a resistor from Vaux sets the IOVP/ISCP trigger current and enables transformer core demagnetization detection. If both OTP and OVP/SCP are needed, place a diode between the PRT pin and the NTC resistor. Absolute-max input voltage -0.3 V to 7 V.
4 CS input Current-sense input from the power MOSFET source resistor. Absolute-max input voltage -0.3 V to 7 V.
5 VDD power_in Chip supply pin. Recommended VCC supply range 12 V to 50 V; absolute max 54 V. Provides bias for the internal blocks and gate driver.
6 Gate output Totem-pole gate driver output for the external power MOSFET.

Key specifications

Parameter Value
Manufacturer OB On Bright Elec
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • OB2632MP
  • OB2632CP
  • OB2632CPA

CAD (KiCad official)

  • Symbol: OB2632MP
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ob2632mp-etched.step / ob2632mp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ob2632mp.step / ob2632mp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OB On Bright Elec datasheet (17 pp, sha256 b7f2b49381b3d36f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF