main
Ray Publish 0.1.1 562f6c2
{
  "slug": "ob2500ncpa",
  "version": "0.1.1",
  "type": "component",
  "description": "OB On Bright Elec AC-DC Controllers and Regulators, SOP-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ob2500ncpa"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ob2500ncpa.kicad_sym",
    "ob2500ncpa.kicad_mod",
    "ob2500ncpa.glb",
    "ob2500ncpa.step",
    "ob2500ncpa.lbr",
    "docs/hero.png",
    "docs/ob2500ncpa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ob2500ncpa-etched.step",
    "ob2500ncpa-etched.glb"
  ],
  "visibility": "public",
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "OB2500NCPA",
    "manufacturer": "OB On Bright Elec",
    "package": "SOP-7",
    "pin_count": 7,
    "category": "AC-DC Controllers and Regulators",
    "parts": {
      "symbol": "ob2500ncpa.kicad_sym",
      "footprint": "ob2500ncpa.kicad_mod",
      "model_3d": "ob2500ncpa-etched.glb",
      "model_3d_plain": "ob2500ncpa.glb",
      "model_3d_step": "ob2500ncpa-etched.step",
      "model_3d_step_plain": "ob2500ncpa.step",
      "lbr": "ob2500ncpa.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Chip power supply. Recommended operating range 8 V to 25 V; UVLO_ON ≈ 7.0 V, UVLO_OFF ≈ 18.2 V, VDD OVP ≈ 27 V. Typically fed from a transformer auxiliary winding via a rectifier and hold-up capacitor after start-up."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Voltage feedback input from the auxiliary winding. Connected to a resistor divider that reflects the output voltage; the sample is compared against Vref = 2.500 V for CV regulation and used for programmable cable-drop compensation and CC-mode shutdown (< 1.55 V for 1024-2048 cycles)."
      },
      {
        "number": "3",
        "name": "RT",
        "type": "input",
        "description": "External over-temperature sense input. Connect an NTC thermistor from RT to GND; an internal ~72 µA source current develops a voltage, and OTP triggers when V(RT) falls below ~1.0 V."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Current-sense input tied to the internal power MOSFET source. Connect an external sense resistor Rs from CS to GND to program the peak switch current and CC set-point; OCP threshold ranges from 500 mV (min) up to 590 mV (max) with on-time slope compensation. Includes an internal 300 ns leading-edge blanking."
      },
      {
        "number": "5",
        "name": "Drain",
        "type": "output",
        "description": "Drain of the integrated 650 V / 1 A power MOSFET (Rds(on) ≈ 9 Ω). Connected to the transformer primary winding. Pins 5 and 6 are both tied to the same internal drain node and should be paralleled on the PCB for thermal dissipation."
      },
      {
        "number": "6",
        "name": "Drain",
        "type": "output",
        "description": "Second bond to the drain of the integrated 650 V / 1 A power MOSFET. Tied internally to pin 5; both must be connected to the primary winding node and used together for current handling and heat sinking."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference and MOSFET source-return / control-ground."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C138831",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:12:36Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "ob2500ncpa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4c9435ffd3683a4ae45655e397c25900eda4f6782a526780f4f7b7b99a32dca7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ob2500ncpa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "60f8622a0a5b449a1c47d2746e929c8a205f3143abbdca2634eade88263b6e46",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "org": "adom"
}