← Commit history
package.json+139−4@@ -1,6 +1,6 @@ { "slug": "ob2500ncpa",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "OB On Bright Elec AC-DC Controllers and Regulators, SOP-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,141 @@ "docs/hero.png", "docs/ob2500ncpa-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ob2500ncpa-etched.step",+ "ob2500ncpa-etched.glb"+ ],+ "component": {+ "mpn": "OB2500NCPA",+ "manufacturer": "OB On Bright Elec",+ "package": "SOP-7",+ "pin_count": 7,+ "category": "AC-DC Controllers and Regulators",+ "parts": {+ "symbol": "ob2500ncpa.kicad_sym",+ "footprint": "ob2500ncpa.kicad_mod",+ "model_3d": "ob2500ncpa-etched.glb",+ "model_3d_plain": "ob2500ncpa.glb",+ "model_3d_step": "ob2500ncpa-etched.step",+ "model_3d_step_plain": "ob2500ncpa.step",+ "lbr": "ob2500ncpa.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Chip power supply. Recommended operating range 8 V to 25 V; UVLO_ON ≈ 7.0 V, UVLO_OFF ≈ 18.2 V, VDD OVP ≈ 27 V. Typically fed from a transformer auxiliary winding via a rectifier and hold-up capacitor after start-up."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Voltage feedback input from the auxiliary winding. Connected to a resistor divider that reflects the output voltage; the sample is compared against Vref = 2.500 V for CV regulation and used for programmable cable-drop compensation and CC-mode shutdown (< 1.55 V for 1024-2048 cycles)."+ },+ {+ "number": "3",+ "name": "RT",+ "type": "input",+ "description": "External over-temperature sense input. Connect an NTC thermistor from RT to GND; an internal ~72 µA source current develops a voltage, and OTP triggers when V(RT) falls below ~1.0 V."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Current-sense input tied to the internal power MOSFET source. Connect an external sense resistor Rs from CS to GND to program the peak switch current and CC set-point; OCP threshold ranges from 500 mV (min) up to 590 mV (max) with on-time slope compensation. Includes an internal 300 ns leading-edge blanking."+ },+ {+ "number": "5",+ "name": "Drain",+ "type": "output",+ "description": "Drain of the integrated 650 V / 1 A power MOSFET (Rds(on) ≈ 9 Ω). Connected to the transformer primary winding. Pins 5 and 6 are both tied to the same internal drain node and should be paralleled on the PCB for thermal dissipation."+ },+ {+ "number": "6",+ "name": "Drain",+ "type": "output",+ "description": "Second bond to the drain of the integrated 650 V / 1 A power MOSFET. Tied internally to pin 5; both must be connected to the primary winding node and used together for current handling and heat sinking."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference and MOSFET source-return / control-ground."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C138831",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:12:36Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "ob2500ncpa.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.4,+ 4.9,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4c9435ffd3683a4ae45655e397c25900eda4f6782a526780f4f7b7b99a32dca7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ob2500ncpa-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5.4,+ 4.9,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "60f8622a0a5b449a1c47d2746e929c8a205f3143abbdca2634eade88263b6e46",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "ob2500ncpa",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "OB On Bright Elec AC-DC Controllers and Regulators, SOP-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/ob2500ncpa-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "ob2500ncpa-etched.step"+ "ob2500ncpa-etched.step",+ "ob2500ncpa-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -164,5 +163,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}