main
Ray
Publish 0.1.1
562f6c2
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164
{
"slug": "ob2500ncpa",
"version": "0.1.1",
"type": "component",
"description": "OB On Bright Elec AC-DC Controllers and Regulators, SOP-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"ob2500ncpa"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ob2500ncpa.kicad_sym",
"ob2500ncpa.kicad_mod",
"ob2500ncpa.glb",
"ob2500ncpa.step",
"ob2500ncpa.lbr",
"docs/hero.png",
"docs/ob2500ncpa-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ob2500ncpa-etched.step",
"ob2500ncpa-etched.glb"
],
"component": {
"mpn": "OB2500NCPA",
"manufacturer": "OB On Bright Elec",
"package": "SOP-7",
"pin_count": 7,
"category": "AC-DC Controllers and Regulators",
"parts": {
"symbol": "ob2500ncpa.kicad_sym",
"footprint": "ob2500ncpa.kicad_mod",
"model_3d": "ob2500ncpa-etched.glb",
"model_3d_plain": "ob2500ncpa.glb",
"model_3d_step": "ob2500ncpa-etched.step",
"model_3d_step_plain": "ob2500ncpa.step",
"lbr": "ob2500ncpa.lbr"
},
"pins": [
{
"number": "1",
"name": "VDD",
"type": "power_in",
"description": "Chip power supply. Recommended operating range 8 V to 25 V; UVLO_ON ≈ 7.0 V, UVLO_OFF ≈ 18.2 V, VDD OVP ≈ 27 V. Typically fed from a transformer auxiliary winding via a rectifier and hold-up capacitor after start-up."
},
{
"number": "2",
"name": "FB",
"type": "input",
"description": "Voltage feedback input from the auxiliary winding. Connected to a resistor divider that reflects the output voltage; the sample is compared against Vref = 2.500 V for CV regulation and used for programmable cable-drop compensation and CC-mode shutdown (< 1.55 V for 1024-2048 cycles)."
},
{
"number": "3",
"name": "RT",
"type": "input",
"description": "External over-temperature sense input. Connect an NTC thermistor from RT to GND; an internal ~72 µA source current develops a voltage, and OTP triggers when V(RT) falls below ~1.0 V."
},
{
"number": "4",
"name": "CS",
"type": "input",
"description": "Current-sense input tied to the internal power MOSFET source. Connect an external sense resistor Rs from CS to GND to program the peak switch current and CC set-point; OCP threshold ranges from 500 mV (min) up to 590 mV (max) with on-time slope compensation. Includes an internal 300 ns leading-edge blanking."
},
{
"number": "5",
"name": "Drain",
"type": "output",
"description": "Drain of the integrated 650 V / 1 A power MOSFET (Rds(on) ≈ 9 Ω). Connected to the transformer primary winding. Pins 5 and 6 are both tied to the same internal drain node and should be paralleled on the PCB for thermal dissipation."
},
{
"number": "6",
"name": "Drain",
"type": "output",
"description": "Second bond to the drain of the integrated 650 V / 1 A power MOSFET. Tied internally to pin 5; both must be connected to the primary winding node and used together for current handling and heat sinking."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Device ground reference and MOSFET source-return / control-ground."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C138831",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:12:36Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "ob2500ncpa.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.4,
4.9,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "4c9435ffd3683a4ae45655e397c25900eda4f6782a526780f4f7b7b99a32dca7",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ob2500ncpa-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.4,
4.9,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "60f8622a0a5b449a1c47d2746e929c8a205f3143abbdca2634eade88263b6e46",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"visibility": "public"
}