main
Ray Publish 0.1.1 500968d
{
  "slug": "ob2358ap",
  "version": "0.1.1",
  "type": "component",
  "description": "OB On Bright Elec AC-DC Controllers and Regulators, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ob2358ap"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ob2358ap.kicad_sym",
    "ob2358ap.kicad_mod",
    "ob2358ap.glb",
    "ob2358ap.step",
    "ob2358ap.lbr",
    "docs/hero.png",
    "docs/ob2358ap-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ob2358ap-etched.step",
    "ob2358ap-etched.glb"
  ],
  "component": {
    "mpn": "OB2358AP",
    "manufacturer": "OB On Bright Elec",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "AC-DC Controllers and Regulators",
    "parts": {
      "symbol": "ob2358ap.kicad_sym",
      "footprint": "ob2358ap.kicad_mod",
      "model_3d": "ob2358ap-etched.glb",
      "model_3d_plain": "ob2358ap.glb",
      "model_3d_step": "ob2358ap-etched.step",
      "model_3d_step_plain": "ob2358ap.step",
      "lbr": "ob2358ap.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD-G",
        "type": "power_in",
        "description": "Internal gate driver power supply. An external resistor between VDD and VDD-G can adjust the internal gate drive strength / Drain falling-edge slope for EMI optimization. Absolute maximum input: -0.3V to 30V."
      },
      {
        "number": "2",
        "name": "VDD",
        "type": "power_in",
        "description": "IC DC power-supply input, typically fed from the transformer auxiliary winding. UVLO_OFF (start) ≈15.8V, UVLO_ON (stop) ≈9.7V; internal Zener clamp at ~30V (10 mA continuous max). Startup current ~5 µA, operating current ~1.6 mA."
      },
      {
        "number": "3",
        "name": "FB",
        "type": "input",
        "description": "Feedback input from the opto-coupler. PWM duty cycle is set by the FB voltage together with the SENSE signal. Open-loop voltage ~5.7V, zero-duty threshold ~0.8V, input impedance ~4kΩ. Absolute max: -0.3V to 7V."
      },
      {
        "number": "4",
        "name": "SENSE",
        "type": "input",
        "description": "Current-sense input from the source resistor of the internal power MOSFET, providing cycle-by-cycle current limiting. Internal current-limit threshold ~0.77V (FB=3.3V) with 270ns leading-edge blanking; input impedance ~40kΩ. Absolute max: -0.3V to 7V."
      },
      {
        "number": "5",
        "name": "Drain",
        "type": "output",
        "description": "High-voltage drain of the integrated 600V power MOSFET, connected to the primary winding of the flyback transformer. Pins 5 and 6 are internally tied together and typically bonded to a PCB copper area used as a heatsink."
      },
      {
        "number": "6",
        "name": "Drain",
        "type": "output",
        "description": "High-voltage drain of the integrated 600V power MOSFET (paralleled with pin 5). Used to spread current/heat; typically bonded to a copper heatsink area."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return for the controller and source of the internal power MOSFET. Pins 7 and 8 are internally connected; tie together on the PCB."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return (paralleled with pin 7). Serves both signal and power MOSFET source return."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C36607",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:12:14Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "ob2358ap.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ob2358ap-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4ab159a70492efcac44df340db0c2bf93e2ce176abe869e08ff748f0e45baabb",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}