← Commit history
package.json+145−4@@ -1,6 +1,6 @@ { "slug": "ob2358ap",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "OB On Bright Elec AC-DC Controllers and Regulators, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,147 @@ "docs/hero.png", "docs/ob2358ap-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ob2358ap-etched.step",+ "ob2358ap-etched.glb"+ ],+ "component": {+ "mpn": "OB2358AP",+ "manufacturer": "OB On Bright Elec",+ "package": "DIP-8",+ "pin_count": 8,+ "category": "AC-DC Controllers and Regulators",+ "parts": {+ "symbol": "ob2358ap.kicad_sym",+ "footprint": "ob2358ap.kicad_mod",+ "model_3d": "ob2358ap-etched.glb",+ "model_3d_plain": "ob2358ap.glb",+ "model_3d_step": "ob2358ap-etched.step",+ "model_3d_step_plain": "ob2358ap.step",+ "lbr": "ob2358ap.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD-G",+ "type": "power_in",+ "description": "Internal gate driver power supply. An external resistor between VDD and VDD-G can adjust the internal gate drive strength / Drain falling-edge slope for EMI optimization. Absolute maximum input: -0.3V to 30V."+ },+ {+ "number": "2",+ "name": "VDD",+ "type": "power_in",+ "description": "IC DC power-supply input, typically fed from the transformer auxiliary winding. UVLO_OFF (start) ≈15.8V, UVLO_ON (stop) ≈9.7V; internal Zener clamp at ~30V (10 mA continuous max). Startup current ~5 µA, operating current ~1.6 mA."+ },+ {+ "number": "3",+ "name": "FB",+ "type": "input",+ "description": "Feedback input from the opto-coupler. PWM duty cycle is set by the FB voltage together with the SENSE signal. Open-loop voltage ~5.7V, zero-duty threshold ~0.8V, input impedance ~4kΩ. Absolute max: -0.3V to 7V."+ },+ {+ "number": "4",+ "name": "SENSE",+ "type": "input",+ "description": "Current-sense input from the source resistor of the internal power MOSFET, providing cycle-by-cycle current limiting. Internal current-limit threshold ~0.77V (FB=3.3V) with 270ns leading-edge blanking; input impedance ~40kΩ. Absolute max: -0.3V to 7V."+ },+ {+ "number": "5",+ "name": "Drain",+ "type": "output",+ "description": "High-voltage drain of the integrated 600V power MOSFET, connected to the primary winding of the flyback transformer. Pins 5 and 6 are internally tied together and typically bonded to a PCB copper area used as a heatsink."+ },+ {+ "number": "6",+ "name": "Drain",+ "type": "output",+ "description": "High-voltage drain of the integrated 600V power MOSFET (paralleled with pin 5). Used to spread current/heat; typically bonded to a copper heatsink area."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for the controller and source of the internal power MOSFET. Pins 7 and 8 are internally connected; tie together on the PCB."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return (paralleled with pin 7). Serves both signal and power MOSFET source return."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C36607",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:12:14Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "ob2358ap.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ob2358ap-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4ab159a70492efcac44df340db0c2bf93e2ce176abe869e08ff748f0e45baabb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "ob2358ap",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "OB On Bright Elec AC-DC Controllers and Regulators, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/ob2358ap-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "ob2358ap-etched.step"+ "ob2358ap-etched.step",+ "ob2358ap-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -170,5 +169,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}