main
History Download
Ray Publish 0.1.0 12eba73

NY8B062D

Nyquest Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-16

NY8B062D from Nyquest Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive power supply, 2.0V to 5.5V for system clock up to 8MHz and 2.2V to 5.5V above 8MHz.
2 PA6/Xin bidirectional PA6 is a bidirectional I/O pin that can also be the crystal oscillator input Xin; its pull-high should not be enabled when used as a crystal pad.
3 PA7/Xout bidirectional PA7 is a bidirectional I/O pin that can be the crystal oscillator output Xout or the instruction clock output.
4 PA5/RSTb/Vpp bidirectional PA5 is an input or open-drain output pin that can be the active-low reset RSTb; more than 7.75V on this pin enters EPROM programming mode.
5 PB3/AIN8/PWM1/BZ1/CMPO/SDO bidirectional PB3 is a bidirectional I/O pin with ADC input AIN8, PWM1, Buzzer1 or comparator output, and programming pad SDO.
6 PB2/AIN7/PWM2/BZ2 bidirectional PB2 is a bidirectional I/O pin with ADC input AIN7 and PWM2 or Buzzer2 output.
7 PB1/AIN6/IR/INT1 bidirectional PB1 is a bidirectional I/O pin with ADC input AIN6, IR carrier output when IR mode is enabled, and external interrupt input INT1.
8 PB0/AIN5/INT0 bidirectional PB0 is a bidirectional I/O pin with ADC input AIN5 and external interrupt input INT0.
9 PB4/AIN9 bidirectional PB4 is a bidirectional I/O pin with ADC analog input AIN9.
10 PB5/AIN10 bidirectional PB5 is a bidirectional I/O pin with ADC analog input AIN10.
11 PA0/AIN0/VREFH bidirectional PA0 is a bidirectional I/O pin and comparator input, with ADC input AIN0 or external ADC high reference VREFH (between 2V and VDD).
12 PA1/AIN1/EX_CKI1 bidirectional PA1 is a bidirectional I/O pin and comparator input, with ADC input AIN1 and Timer2/3 external clock EX_CKI1.
13 PA2/AIN2/PWM3/BZ3/SDI bidirectional PA2 is a bidirectional I/O pin and comparator input, with ADC input AIN2, PWM3 or Buzzer3 output, and programming pad SDI.
14 PA3/AIN3 bidirectional PA3 is a bidirectional I/O pin and comparator input with ADC analog input AIN3.
15 PA4/AIN4/EX_CKI0/SCK bidirectional PA4 is a bidirectional I/O pin with ADC input AIN4, Timer0/1 external clock EX_CKI0, and programming pad SCK.
16 VSS power_in Ground.

Key specifications

Parameter Value
Manufacturer Nyquest Tech
Package SOP-16
Category Single Chip Microcomputer/Microcontroller
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD - VSS Supply voltage VDD-VSS -0.5 6 V 104
Operating Temperature TOP -40 85 °C 104
Storage Temperature TST -40 125 °C 104
Operating voltage VDD 3.3 5.5 V 20M/2T 113
Operating voltage VDD 2.7 5.5 V 16M/2T 113
Operating voltage VDD 2.2 5.5 V 20M/4T 113
Operating voltage VDD 2 5.5 V 16M/4T 113
Operating voltage VDD 1.8 5.5 V ≦6M(2T or 4T) 113
Input high voltage RSTb VIH 4 V VDD=5V, RSTb (0.8 VDD) 104
Input high voltage RSTb VIH 2.4 V VDD=3V, RSTb (0.8 VDD) 104
Input high voltage all other I/O pins, EX_CKI0/1, INT0/1 VIH 3.5 V VDD=5V, All other I/O pins, EX_CKI0/1, INT0/1 104
Input high voltage all other I/O pins, EX_CKI0/1, INT0/1 (CMOS option) VIH 2.1 V VDD=3V, CMOS option (0.7 VDD) 104
Input high voltage EX_CKI0/1 VIH 2.5 V VDD=5V, All other I/O pins, EX_CKI0/1 104
Input high voltage EX_CKI0/1 (TTL option) VIH 1.5 V VDD=3V, TTL option (0.5 VDD) 104
Input low voltage RSTb VIL 1 V VDD=5V, RSTb (0.2 VDD) 104
Input low voltage RSTb VIL 0.6 V VDD=3V, RSTb (0.2 VDD) 104
Input low voltage all other I/O pins, EX_CKI0/1, INT0/1 VIL 1.5 V VDD=5V, All other I/O pins, EX_CKI0/1, INT0/1 104
Input low voltage all other I/O pins, EX_CKI0/1, INT0/1 (CMOS option) VIL 0.9 V VDD=3V, CMOS option (0.3 VDD) 104
Input low voltage EX_CKI0/1 VIL 1 V VDD=5V, All other I/O pins, EX_CKI0/1 104
Input low voltage EX_CKI0/1 (TTL option) VIL 0.6 V VDD=3V, TTL option (0.2 VDD) 104
Halt current, WDT disabled IHALT 0.5 uA VDD=5V, Halt mode, WDT disabled. 105
Halt current, WDT disabled IHALT 0.2 uA VDD=3V, Halt mode, WDT disabled. 105
Halt current, WDT enabled IHALT 5 uA VDD=5V, Halt mode, WDT enabled. 105
Halt current, WDT enabled IHALT 2 uA VDD=3V, Halt mode, WDT enabled. 105
I_HRC deviation by socket -1 1 % Socket installed directly on writer. 106
I_HRC deviation by handler -3 3 % Handler condition with correct setup. 106
I_LRC deviation by handler -5 5 % 106
Comparator input voltage range VIVR 0 5 V FHOSC=1MHz 106
LVD voltage error ELVD 3 % FHOSC=1MHz, LVD=4.3V 106
VREFH input voltage VREFH 2 V Ext. reference voltage; maximum VDD 106
Int. 4V reference voltage VREF4 3.96 4 4.04 V VDD=5V 106
Int. 3V reference voltage VREF3 2.97 3 3.03 V VDD=5V 106
Int. 2V reference voltage VREF2 1.98 2 2.02 V VDD=5V 106
ADC analog input voltage 0 V maximum VREFH 106
ADC Conversion Cycle Time ADCYCLE 16 1/ADCLK SHCLK=2 ADC clock 106
ADC Sampling Rate ADCsample 125 K/sec VDD=5V 106
ADC Clock Frequency ADCLK 2 MHz 106
Differential Nonlinearity DNL -1 1 LSB 106
Integral Nonlinearity INL -2 2 LSB VDD=5.0V, AVREFH=5V, FADSMP=62.5K 106
No Missing Code NMC 10 11 12 Bits 106
Output high current IOH 18 mA VDD=5V, VOH=4.0V 104
Output high current IOH 10 mA VDD=3V, VOH=2.0V 104
Output low current (Large current) IOL 43 mA VDD=5V, VOL=1.0V 104
Output low current (Large current) IOL 28 mA VDD=3V 104
Output low current (Normal current) IOL 29 mA VDD=5V, VOL=1.0V 104
Output low current (Normal current) IOL 19 mA VDD=3V 104
IR sink current IIR 43 mA VDD=5V, VOL=1.0V 104
IR sink current IIR 28 mA VDD=3V 104
Standby current ISTB 3.5 uA VDD=5V, Standby mode, FHOSC disabled, FLOSC=32KHz @ I_LRC/4 105
Standby current ISTB 1.3 uA VDD=3V, Standby mode, FHOSC disabled, FLOSC=32KHz @ I_LRC/4 105
Pull-High resistor (not include PA5) RPH 50 KΩ VDD=5V, Pull-High resistor (not include PA5) 105
Pull-High resistor (not include PA5) RPH 100 KΩ VDD=3V, Pull-High resistor (not include PA5) 105
Pull-High resistor (PA5) RPH 85 KΩ VDD=5V, Pull-High resistor (PA5) 105
Pull-Low resistor RPL 50 KΩ VDD=5V, Pull-Low resistor 105
Pull-Low resistor RPL 100 KΩ VDD=3V, Pull-Low resistor 105
Comparator enable to output valid TENO 20 ms FHOSC=1MHz 106
Operating current of comparator ICO 250 uA FHOSC=1MHz, P2V mode 106
Operating current of LVD ILVD 300 uA FHOSC=1MHz, LVD=4.3V 106
ADC current consumption IOP(ADC) 0.3 mA 106

CAD (KiCad official)

  • Symbol: NY8B062D
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: ny8b062d-etched.step / ny8b062d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ny8b062d.step / ny8b062d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nyquest Tech datasheet (115 pp, sha256 74d70ceb31973a76, retrieved 2026-11-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF