Generated by kicad-footprint-generator · KiCad file format 20260206
NY8B062D
Nyquest Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-16
NY8B062D from Nyquest Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply, 2.0V to 5.5V for system clock up to 8MHz and 2.2V to 5.5V above 8MHz. |
| 2 | PA6/Xin | bidirectional | PA6 is a bidirectional I/O pin that can also be the crystal oscillator input Xin; its pull-high should not be enabled when used as a crystal pad. |
| 3 | PA7/Xout | bidirectional | PA7 is a bidirectional I/O pin that can be the crystal oscillator output Xout or the instruction clock output. |
| 4 | PA5/RSTb/Vpp | bidirectional | PA5 is an input or open-drain output pin that can be the active-low reset RSTb; more than 7.75V on this pin enters EPROM programming mode. |
| 5 | PB3/AIN8/PWM1/BZ1/CMPO/SDO | bidirectional | PB3 is a bidirectional I/O pin with ADC input AIN8, PWM1, Buzzer1 or comparator output, and programming pad SDO. |
| 6 | PB2/AIN7/PWM2/BZ2 | bidirectional | PB2 is a bidirectional I/O pin with ADC input AIN7 and PWM2 or Buzzer2 output. |
| 7 | PB1/AIN6/IR/INT1 | bidirectional | PB1 is a bidirectional I/O pin with ADC input AIN6, IR carrier output when IR mode is enabled, and external interrupt input INT1. |
| 8 | PB0/AIN5/INT0 | bidirectional | PB0 is a bidirectional I/O pin with ADC input AIN5 and external interrupt input INT0. |
| 9 | PB4/AIN9 | bidirectional | PB4 is a bidirectional I/O pin with ADC analog input AIN9. |
| 10 | PB5/AIN10 | bidirectional | PB5 is a bidirectional I/O pin with ADC analog input AIN10. |
| 11 | PA0/AIN0/VREFH | bidirectional | PA0 is a bidirectional I/O pin and comparator input, with ADC input AIN0 or external ADC high reference VREFH (between 2V and VDD). |
| 12 | PA1/AIN1/EX_CKI1 | bidirectional | PA1 is a bidirectional I/O pin and comparator input, with ADC input AIN1 and Timer2/3 external clock EX_CKI1. |
| 13 | PA2/AIN2/PWM3/BZ3/SDI | bidirectional | PA2 is a bidirectional I/O pin and comparator input, with ADC input AIN2, PWM3 or Buzzer3 output, and programming pad SDI. |
| 14 | PA3/AIN3 | bidirectional | PA3 is a bidirectional I/O pin and comparator input with ADC analog input AIN3. |
| 15 | PA4/AIN4/EX_CKI0/SCK | bidirectional | PA4 is a bidirectional I/O pin with ADC input AIN4, Timer0/1 external clock EX_CKI0, and programming pad SCK. |
| 16 | VSS | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nyquest Tech |
| Package | SOP-16 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD - VSS Supply voltage | VDD-VSS | -0.5 | 6 | V | 104 | ||
| Operating Temperature | TOP | -40 | 85 | °C | 104 | ||
| Storage Temperature | TST | -40 | 125 | °C | 104 | ||
| Operating voltage | VDD | 3.3 | 5.5 | V | 20M/2T | 113 | |
| Operating voltage | VDD | 2.7 | 5.5 | V | 16M/2T | 113 | |
| Operating voltage | VDD | 2.2 | 5.5 | V | 20M/4T | 113 | |
| Operating voltage | VDD | 2 | 5.5 | V | 16M/4T | 113 | |
| Operating voltage | VDD | 1.8 | 5.5 | V | ≦6M(2T or 4T) | 113 | |
| Input high voltage RSTb | VIH | 4 | V | VDD=5V, RSTb (0.8 VDD) | 104 | ||
| Input high voltage RSTb | VIH | 2.4 | V | VDD=3V, RSTb (0.8 VDD) | 104 | ||
| Input high voltage all other I/O pins, EX_CKI0/1, INT0/1 | VIH | 3.5 | V | VDD=5V, All other I/O pins, EX_CKI0/1, INT0/1 | 104 | ||
| Input high voltage all other I/O pins, EX_CKI0/1, INT0/1 (CMOS option) | VIH | 2.1 | V | VDD=3V, CMOS option (0.7 VDD) | 104 | ||
| Input high voltage EX_CKI0/1 | VIH | 2.5 | V | VDD=5V, All other I/O pins, EX_CKI0/1 | 104 | ||
| Input high voltage EX_CKI0/1 (TTL option) | VIH | 1.5 | V | VDD=3V, TTL option (0.5 VDD) | 104 | ||
| Input low voltage RSTb | VIL | 1 | V | VDD=5V, RSTb (0.2 VDD) | 104 | ||
| Input low voltage RSTb | VIL | 0.6 | V | VDD=3V, RSTb (0.2 VDD) | 104 | ||
| Input low voltage all other I/O pins, EX_CKI0/1, INT0/1 | VIL | 1.5 | V | VDD=5V, All other I/O pins, EX_CKI0/1, INT0/1 | 104 | ||
| Input low voltage all other I/O pins, EX_CKI0/1, INT0/1 (CMOS option) | VIL | 0.9 | V | VDD=3V, CMOS option (0.3 VDD) | 104 | ||
| Input low voltage EX_CKI0/1 | VIL | 1 | V | VDD=5V, All other I/O pins, EX_CKI0/1 | 104 | ||
| Input low voltage EX_CKI0/1 (TTL option) | VIL | 0.6 | V | VDD=3V, TTL option (0.2 VDD) | 104 | ||
| Halt current, WDT disabled | IHALT | 0.5 | uA | VDD=5V, Halt mode, WDT disabled. | 105 | ||
| Halt current, WDT disabled | IHALT | 0.2 | uA | VDD=3V, Halt mode, WDT disabled. | 105 | ||
| Halt current, WDT enabled | IHALT | 5 | uA | VDD=5V, Halt mode, WDT enabled. | 105 | ||
| Halt current, WDT enabled | IHALT | 2 | uA | VDD=3V, Halt mode, WDT enabled. | 105 | ||
| I_HRC deviation by socket | -1 | 1 | % | Socket installed directly on writer. | 106 | ||
| I_HRC deviation by handler | -3 | 3 | % | Handler condition with correct setup. | 106 | ||
| I_LRC deviation by handler | -5 | 5 | % | 106 | |||
| Comparator input voltage range | VIVR | 0 | 5 | V | FHOSC=1MHz | 106 | |
| LVD voltage error | ELVD | 3 | % | FHOSC=1MHz, LVD=4.3V | 106 | ||
| VREFH input voltage | VREFH | 2 | V | Ext. reference voltage; maximum VDD | 106 | ||
| Int. 4V reference voltage | VREF4 | 3.96 | 4 | 4.04 | V | VDD=5V | 106 |
| Int. 3V reference voltage | VREF3 | 2.97 | 3 | 3.03 | V | VDD=5V | 106 |
| Int. 2V reference voltage | VREF2 | 1.98 | 2 | 2.02 | V | VDD=5V | 106 |
| ADC analog input voltage | 0 | V | maximum VREFH | 106 | |||
| ADC Conversion Cycle Time | ADCYCLE | 16 | 1/ADCLK | SHCLK=2 ADC clock | 106 | ||
| ADC Sampling Rate | ADCsample | 125 | K/sec | VDD=5V | 106 | ||
| ADC Clock Frequency | ADCLK | 2 | MHz | 106 | |||
| Differential Nonlinearity | DNL | -1 | 1 | LSB | 106 | ||
| Integral Nonlinearity | INL | -2 | 2 | LSB | VDD=5.0V, AVREFH=5V, FADSMP=62.5K | 106 | |
| No Missing Code | NMC | 10 | 11 | 12 | Bits | 106 | |
| Output high current | IOH | 18 | mA | VDD=5V, VOH=4.0V | 104 | ||
| Output high current | IOH | 10 | mA | VDD=3V, VOH=2.0V | 104 | ||
| Output low current (Large current) | IOL | 43 | mA | VDD=5V, VOL=1.0V | 104 | ||
| Output low current (Large current) | IOL | 28 | mA | VDD=3V | 104 | ||
| Output low current (Normal current) | IOL | 29 | mA | VDD=5V, VOL=1.0V | 104 | ||
| Output low current (Normal current) | IOL | 19 | mA | VDD=3V | 104 | ||
| IR sink current | IIR | 43 | mA | VDD=5V, VOL=1.0V | 104 | ||
| IR sink current | IIR | 28 | mA | VDD=3V | 104 | ||
| Standby current | ISTB | 3.5 | uA | VDD=5V, Standby mode, FHOSC disabled, FLOSC=32KHz @ I_LRC/4 | 105 | ||
| Standby current | ISTB | 1.3 | uA | VDD=3V, Standby mode, FHOSC disabled, FLOSC=32KHz @ I_LRC/4 | 105 | ||
| Pull-High resistor (not include PA5) | RPH | 50 | KΩ | VDD=5V, Pull-High resistor (not include PA5) | 105 | ||
| Pull-High resistor (not include PA5) | RPH | 100 | KΩ | VDD=3V, Pull-High resistor (not include PA5) | 105 | ||
| Pull-High resistor (PA5) | RPH | 85 | KΩ | VDD=5V, Pull-High resistor (PA5) | 105 | ||
| Pull-Low resistor | RPL | 50 | KΩ | VDD=5V, Pull-Low resistor | 105 | ||
| Pull-Low resistor | RPL | 100 | KΩ | VDD=3V, Pull-Low resistor | 105 | ||
| Comparator enable to output valid | TENO | 20 | ms | FHOSC=1MHz | 106 | ||
| Operating current of comparator | ICO | 250 | uA | FHOSC=1MHz, P2V mode | 106 | ||
| Operating current of LVD | ILVD | 300 | uA | FHOSC=1MHz, LVD=4.3V | 106 | ||
| ADC current consumption | IOP(ADC) | 0.3 | mA | 106 |
CAD (KiCad official)
- Symbol:
NY8B062D - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
ny8b062d-etched.step/ny8b062d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ny8b062d.step/ny8b062d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nyquest Tech datasheet (115 pp, sha256
74d70ceb31973a76, retrieved 2026-11-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).