component
NV25160DWHFT3G
Public Made by Adomby adom
onsemi EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
NV25160DWHFT3G
onsemi · EEPROM · SOIC-8
NV25160DWHFT3G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip select input that enables the device when low; when CS is high, SO is tri-stated and the device is in Standby Mode. |
| 2 | SO | tri_state | Serial data output that shifts data out on the falling edge of SCK in SPI modes (0,0) and (1,1) and is high impedance when CS is high or during HOLD. |
| 3 | WP | input | Write protect input that allows all write operations when held high, and disables Status Register writes when low with the WPEN bit set to 1. |
| 4 | VSS | power_in | Ground. |
| 5 | SI | input | Serial data input that accepts op-codes, addresses and data, latched on the rising edge of SCK in SPI modes (0,0) and (1,1). |
| 6 | SCK | input | Serial clock input provided by the host to synchronize communication with the device. |
| 7 | HOLD | input | Hold input that pauses serial communication when taken low with SCK low, and should be tied to VCC directly or through a resistor when not used. |
| 8 | VCC | power_in | Power supply, 2.5 V to 5.5 V supply voltage range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
NV25160DWHFT3G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
nv25160dwhft3g-etched.step/nv25160dwhft3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nv25160dwhft3g.step/nv25160dwhft3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
cd6edef779f64c11, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NV25160DWHFT3G
**onsemi** · EEPROM · SOIC-8
NV25160DWHFT3G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip select input that enables the device when low; when CS is high, SO is tri-stated and the device is in Standby Mode. |
| 2 | SO | tri_state | Serial data output that shifts data out on the falling edge of SCK in SPI modes (0,0) and (1,1) and is high impedance when CS is high or during HOLD. |
| 3 | WP | input | Write protect input that allows all write operations when held high, and disables Status Register writes when low with the WPEN bit set to 1. |
| 4 | VSS | power_in | Ground. |
| 5 | SI | input | Serial data input that accepts op-codes, addresses and data, latched on the rising edge of SCK in SPI modes (0,0) and (1,1). |
| 6 | SCK | input | Serial clock input provided by the host to synchronize communication with the device. |
| 7 | HOLD | input | Hold input that pauses serial communication when taken low with SCK low, and should be tied to VCC directly or through a resistor when not used. |
| 8 | VCC | power_in | Power supply, 2.5 V to 5.5 V supply voltage range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `NV25160DWHFT3G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `nv25160dwhft3g-etched.step` / `nv25160dwhft3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nv25160dwhft3g.step` / `nv25160dwhft3g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nv25160dwhft3-d.pdf) (14 pp, sha256 `cd6edef779f64c11`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nv25160dwhft3g-datasheet.pdf)