component

NV25160DWHFT3G

Public Made by Adom

by adom

onsemi EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmemorynv25160dwhft3gfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 11h ago
viewers nv25160dwhft3g: viewers · Ray 11h ago
nv25160dwhft3g-etched.glb Publish 0.1.0 · Ray 11h ago
nv25160dwhft3g-etched.step nv25160dwhft3g: factory component page (tier=mfr) · Ray 11h ago
nv25160dwhft3g-hero.glb nv25160dwhft3g: hero GLB from the etched model (keeps the MPN mark) · Ray 11h ago
nv25160dwhft3g-hero.overlay.json Publish 0.1.0 · Ray 11h ago
nv25160dwhft3g.glb Publish 0.1.0 · Ray 11h ago
nv25160dwhft3g.kicad_mod Publish 0.1.0 · Ray 11h ago
nv25160dwhft3g.kicad_sym Publish 0.1.0 · Ray 11h ago
nv25160dwhft3g.lbr Publish 0.1.0 · Ray 11h ago
nv25160dwhft3g.step Publish 0.1.0 · Ray 11h ago
package.json Publish 0.1.0 · Ray 11h ago
page.json Set visibility: public · Ray 11h ago
README.md Publish 0.1.0 · Ray 11h ago

NV25160DWHFT3G

onsemi · EEPROM · SOIC-8

NV25160DWHFT3G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip select input that enables the device when low; when CS is high, SO is tri-stated and the device is in Standby Mode.
2 SO tri_state Serial data output that shifts data out on the falling edge of SCK in SPI modes (0,0) and (1,1) and is high impedance when CS is high or during HOLD.
3 WP input Write protect input that allows all write operations when held high, and disables Status Register writes when low with the WPEN bit set to 1.
4 VSS power_in Ground.
5 SI input Serial data input that accepts op-codes, addresses and data, latched on the rising edge of SCK in SPI modes (0,0) and (1,1).
6 SCK input Serial clock input provided by the host to synchronize communication with the device.
7 HOLD input Hold input that pauses serial communication when taken low with SCK low, and should be tied to VCC directly or through a resistor when not used.
8 VCC power_in Power supply, 2.5 V to 5.5 V supply voltage range.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Memory
Pins 8

CAD (KiCad official)

  • Symbol: NV25160DWHFT3G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: nv25160dwhft3g-etched.step / nv25160dwhft3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nv25160dwhft3g.step / nv25160dwhft3g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 cd6edef779f64c11, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF