main
Ray
Publish 0.1.0
8065c29
NV24C64DWVLT3G
onsemi · EEPROM · SOP-8
NV24C64DWVLT3G from onsemi, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input hard-wired HIGH or LOW to match slave address bit A0, pulled LOW internally when floating (up to eight devices on one bus). |
| 2 | A1 | input | Device address input hard-wired HIGH or LOW to match slave address bit A1, pulled LOW internally when floating. |
| 3 | A2 | input | Device address input hard-wired HIGH or LOW to match slave address bit A2, pulled LOW internally when floating. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Serial data I/O that accepts input data and delivers output data, open drain in transmit mode, with a pull-up resistor to VCC on the I2C bus. |
| 6 | SCL | input | Serial clock input that accepts the clock signal generated by the Master. |
| 7 | WP | input | Write protect input that inhibits all write operations to the entire memory when pulled HIGH, pulled LOW internally when floating. |
| 8 | VCC | power_in | Power supply, 1.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Read Current | ICCR | 1 | mA | Read, fSCL = 1 MHz | 3 | ||
| Write Current | ICCW | 1 | mA | Write, fSCL = 1 MHz | 3 | ||
| Standby Current | ISB | 2 | µA | All I/O Pins at GND or VCC | 3 | ||
| I/O Pin Leakage | IL | 2 | µA | Pin at GND or VCC | 3 | ||
| Input Low Voltage (SCL, SDA), min only | VIL | -0.5 | V | SCL, SDA; max is VCC x 0.3 | 3 | ||
| Input Low Voltage (A2, A1, A0, WP), min only | VILA | -0.5 | V | A2, A1, A0 and WP; max is VCC x 0.3 | 3 | ||
| Output Low Voltage | VOL1 | 0.4 | V | VCC ≥ 2.5 V, IOL = 3.0 mA | 3 | ||
| Output Low Voltage | VOL2 | 0.2 | V | VCC < 2.5 V, IOL = 1.0 mA | 3 | ||
| SDA I/O Pin Capacitance | CIN | 8 | pF | VIN = 0 V | 3 | ||
| Input Capacitance (other pins) | CIN | 6 | pF | VIN = 0 V | 3 | ||
| On-Chip Pull-Down Resistor (WP, A0, A1, A2) | RPD | 50 | kΩ | VIN < VIHA | 3 | ||
| On-Chip Pull-Down Current (WP, A0, A1, A2) | IPD | 2 | µA | VIN > VIHA | 3 | ||
| Clock Frequency, Standard | FSCL | 100 | kHz | Standard | 4 | ||
| Clock Frequency, Fast | FSCL | 400 | kHz | Fast | 4 | ||
| Clock Frequency, Fast-Plus | FSCL | 1000 | kHz | Fast-Plus | 4 | ||
| Noise Pulse Filtered at SCL and SDA Inputs | Ti | 50 | ns | Standard, Fast, Fast-Plus | 4 | ||
| Write Cycle Time | tWR | 4 | ms | Standard, Fast, Fast-Plus | 4 | ||
| Power-up to Ready Mode | tPU | 0.35 | ms | Standard, Fast, Fast-Plus | 4 | ||
| Supply Voltage Range | VCC | 1.7 | 5.5 | V | TA = −40°C to +125°C | 3 | |
| Operating Temperature | TA | -40 | 125 | °C | Automotive Grade 1 | 3 | |
| Storage Temperature | Tstg | -65 | 150 | °C | 2 | ||
| Voltage on Any Pin with Respect to Ground | -0.5 | 6.5 | V | Note 1 | 2 |
CAD (KiCad official)
- Symbol:
NV24C64DWVLT3G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
nv24c64dwvlt3g-etched.step/nv24c64dwvlt3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nv24c64dwvlt3g.step/nv24c64dwvlt3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
175d277001463e22, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NV24C64DWVLT3G
**onsemi** · EEPROM · SOP-8
NV24C64DWVLT3G from onsemi, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Device address input hard-wired HIGH or LOW to match slave address bit A0, pulled LOW internally when floating (up to eight devices on one bus). |
| 2 | A1 | input | Device address input hard-wired HIGH or LOW to match slave address bit A1, pulled LOW internally when floating. |
| 3 | A2 | input | Device address input hard-wired HIGH or LOW to match slave address bit A2, pulled LOW internally when floating. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Serial data I/O that accepts input data and delivers output data, open drain in transmit mode, with a pull-up resistor to VCC on the I2C bus. |
| 6 | SCL | input | Serial clock input that accepts the clock signal generated by the Master. |
| 7 | WP | input | Write protect input that inhibits all write operations to the entire memory when pulled HIGH, pulled LOW internally when floating. |
| 8 | VCC | power_in | Power supply, 1.7 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Read Current | ICCR | | | 1 | mA | Read, fSCL = 1 MHz | 3 |
| Write Current | ICCW | | | 1 | mA | Write, fSCL = 1 MHz | 3 |
| Standby Current | ISB | | | 2 | µA | All I/O Pins at GND or VCC | 3 |
| I/O Pin Leakage | IL | | | 2 | µA | Pin at GND or VCC | 3 |
| Input Low Voltage (SCL, SDA), min only | VIL | -0.5 | | | V | SCL, SDA; max is VCC x 0.3 | 3 |
| Input Low Voltage (A2, A1, A0, WP), min only | VILA | -0.5 | | | V | A2, A1, A0 and WP; max is VCC x 0.3 | 3 |
| Output Low Voltage | VOL1 | | | 0.4 | V | VCC ≥ 2.5 V, IOL = 3.0 mA | 3 |
| Output Low Voltage | VOL2 | | | 0.2 | V | VCC < 2.5 V, IOL = 1.0 mA | 3 |
| SDA I/O Pin Capacitance | CIN | | | 8 | pF | VIN = 0 V | 3 |
| Input Capacitance (other pins) | CIN | | | 6 | pF | VIN = 0 V | 3 |
| On-Chip Pull-Down Resistor (WP, A0, A1, A2) | RPD | 50 | | | kΩ | VIN < VIHA | 3 |
| On-Chip Pull-Down Current (WP, A0, A1, A2) | IPD | | | 2 | µA | VIN > VIHA | 3 |
| Clock Frequency, Standard | FSCL | | | 100 | kHz | Standard | 4 |
| Clock Frequency, Fast | FSCL | | | 400 | kHz | Fast | 4 |
| Clock Frequency, Fast-Plus | FSCL | | | 1000 | kHz | Fast-Plus | 4 |
| Noise Pulse Filtered at SCL and SDA Inputs | Ti | | | 50 | ns | Standard, Fast, Fast-Plus | 4 |
| Write Cycle Time | tWR | | | 4 | ms | Standard, Fast, Fast-Plus | 4 |
| Power-up to Ready Mode | tPU | | | 0.35 | ms | Standard, Fast, Fast-Plus | 4 |
| Supply Voltage Range | VCC | 1.7 | | 5.5 | V | TA = −40°C to +125°C | 3 |
| Operating Temperature | TA | -40 | | 125 | °C | Automotive Grade 1 | 3 |
| Storage Temperature | Tstg | -65 | | 150 | °C | | 2 |
| Voltage on Any Pin with Respect to Ground | | -0.5 | | 6.5 | V | Note 1 | 2 |
## CAD (KiCad official)
- Symbol: `NV24C64DWVLT3G`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `nv24c64dwvlt3g-etched.step` / `nv24c64dwvlt3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nv24c64dwvlt3g.step` / `nv24c64dwvlt3g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nv24c64dwvlt3-d.pdf) (14 pp, sha256 `175d277001463e22`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nv24c64dwvlt3g-datasheet.pdf)