Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NV24C64DWVLT3G

onsemi · EEPROM · SOP-8

NV24C64DWVLT3G from onsemi, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input hard-wired HIGH or LOW to match slave address bit A0, pulled LOW internally when floating (up to eight devices on one bus).
2 A1 input Device address input hard-wired HIGH or LOW to match slave address bit A1, pulled LOW internally when floating.
3 A2 input Device address input hard-wired HIGH or LOW to match slave address bit A2, pulled LOW internally when floating.
4 VSS power_in Ground.
5 SDA bidirectional Serial data I/O that accepts input data and delivers output data, open drain in transmit mode, with a pull-up resistor to VCC on the I2C bus.
6 SCL input Serial clock input that accepts the clock signal generated by the Master.
7 WP input Write protect input that inhibits all write operations to the entire memory when pulled HIGH, pulled LOW internally when floating.
8 VCC power_in Power supply, 1.7 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Read Current ICCR 1 mA Read, fSCL = 1 MHz 3
Write Current ICCW 1 mA Write, fSCL = 1 MHz 3
Standby Current ISB 2 µA All I/O Pins at GND or VCC 3
I/O Pin Leakage IL 2 µA Pin at GND or VCC 3
Input Low Voltage (SCL, SDA), min only VIL -0.5 V SCL, SDA; max is VCC x 0.3 3
Input Low Voltage (A2, A1, A0, WP), min only VILA -0.5 V A2, A1, A0 and WP; max is VCC x 0.3 3
Output Low Voltage VOL1 0.4 V VCC ≥ 2.5 V, IOL = 3.0 mA 3
Output Low Voltage VOL2 0.2 V VCC < 2.5 V, IOL = 1.0 mA 3
SDA I/O Pin Capacitance CIN 8 pF VIN = 0 V 3
Input Capacitance (other pins) CIN 6 pF VIN = 0 V 3
On-Chip Pull-Down Resistor (WP, A0, A1, A2) RPD 50 kΩ VIN < VIHA 3
On-Chip Pull-Down Current (WP, A0, A1, A2) IPD 2 µA VIN > VIHA 3
Clock Frequency, Standard FSCL 100 kHz Standard 4
Clock Frequency, Fast FSCL 400 kHz Fast 4
Clock Frequency, Fast-Plus FSCL 1000 kHz Fast-Plus 4
Noise Pulse Filtered at SCL and SDA Inputs Ti 50 ns Standard, Fast, Fast-Plus 4
Write Cycle Time tWR 4 ms Standard, Fast, Fast-Plus 4
Power-up to Ready Mode tPU 0.35 ms Standard, Fast, Fast-Plus 4
Supply Voltage Range VCC 1.7 5.5 V TA = −40°C to +125°C 3
Operating Temperature TA -40 125 °C Automotive Grade 1 3
Storage Temperature Tstg -65 150 °C 2
Voltage on Any Pin with Respect to Ground -0.5 6.5 V Note 1 2

CAD (KiCad official)

  • Symbol: NV24C64DWVLT3G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: nv24c64dwvlt3g-etched.step / nv24c64dwvlt3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nv24c64dwvlt3g.step / nv24c64dwvlt3g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 175d277001463e22, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF