NST20H-DSCR

{
  "slug": "nst20h-dscr",
  "version": "0.1.0",
  "type": "component",
  "description": "NOVOSENSE Temperature Sensors, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "nst20h-dscr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nst20h-dscr.kicad_sym",
    "nst20h-dscr.kicad_mod",
    "nst20h-dscr.glb",
    "nst20h-dscr.step",
    "nst20h-dscr.lbr",
    "docs/hero.png",
    "docs/nst20h-dscr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "nst20h-dscr-hero.glb",
    "nst20h-dscr-hero.overlay.json",
    "nst20h-dscr-etched.glb"
  ],
  "component": {
    "mpn": "NST20H-DSCR",
    "manufacturer": "NOVOSENSE",
    "package": "SC-70-5",
    "pin_count": 5,
    "category": "Sensors",
    "subcategory": "Temperature Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604430302580121600",
    "parts": {
      "symbol": "nst20h-dscr.kicad_sym",
      "footprint": "nst20h-dscr.kicad_mod",
      "model_3d": "nst20h-dscr-hero.glb",
      "model_3d_plain": "nst20h-dscr-etched.glb",
      "model_3d_step": "nst20h-dscr-etched.step",
      "model_3d_step_plain": "nst20h-dscr.step",
      "lbr": "nst20h-dscr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2887312"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T01:13:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "Pin 1 is labelled No Connection (NC) in Table 1.1 and is not used for any signal."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin to be connected to the power supply negative terminal, and it must be grounded for optimum thermal conductivity."
      },
      {
        "number": "3",
        "name": "VO",
        "type": "output",
        "description": "Analog voltage output Vout, which the absolute maximum ratings limit to -0.3 V to VDD+0.3 V and which has a drive capability of 500 µA."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input pin, operating from 2.4 V to 5.5 V with an absolute maximum of 6.5 V (VDD -0.3 V to 6.5 V)."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin to be connected to the power supply negative terminal."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin numbers come from Table 1.1 because Figure 1.1 shows the pin layout without printed pin numb; The SC70(5) package is the only package the datasheet gives for NST20H-DSCR, so the pinout applies t"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0408,
        "at": "2026-10-18T01:11:44"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604430302580121600",
        "pages": 14,
        "sha256": "d494f47b8b81e7b9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nst20h-dscr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.1,
          2.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "nst20h-dscr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.1,
          2.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "307d39e6fd9752c1685e64aa89b20809545e54fea831977a1dced3031515e7d6",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}