component
NST20H-DSCR
Public Made by Adomby adom
NOVOSENSE Temperature Sensors, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNST20H-DSCR
NOVOSENSE · Temperature Sensors · SC-70-5
NST20H-DSCR from NOVOSENSE, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Pin 1 is labelled No Connection (NC) in Table 1.1 and is not used for any signal. |
| 2 | GND | power_in | Ground pin to be connected to the power supply negative terminal, and it must be grounded for optimum thermal conductivity. |
| 3 | VO | output | Analog voltage output Vout, which the absolute maximum ratings limit to -0.3 V to VDD+0.3 V and which has a drive capability of 500 µA. |
| 4 | VDD | power_in | Power supply input pin, operating from 2.4 V to 5.5 V with an absolute maximum of 6.5 V (VDD -0.3 V to 6.5 V). |
| 5 | GND | power_in | Ground pin to be connected to the power supply negative terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | SC-70-5 |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 2.4 | 5.5 | V | 4 | ||
| Temperature Range (supply 2.4 V to 5.5 V) | -30 | 130 | °C | VDD at 2.4V to 5.5V | 4 | ||
| Temperature Range (supply 2.7 V to 5.5 V) | -55 | 130 | °C | VDD at 2.7V to 5.5V | 4 | ||
| Accuracy | -1.5 | 1.5 | °C | TA = 25°C to 30°C | 4 | ||
| Accuracy | -2.5 | 2.5 | °C | TA = 130°C | 4 | ||
| Accuracy | -2.2 | 2.2 | °C | TA = 100°C | 4 | ||
| Accuracy | -2.1 | 2.1 | °C | TA = 85°C | 4 | ||
| Accuracy | -2 | 2 | °C | TA = 80°C | 4 | ||
| Accuracy | -1.9 | 1.9 | °C | TA = 0°C | 4 | ||
| Accuracy | -2.3 | 2.3 | °C | TA = -40°C | 4 | ||
| Drift | -0.2 | 0.2 | °C | 1000-hour stress test at +130°C with VDD = 5.5V (Note 1) | 4 | ||
| Sensor Gain | -12.2 | -11.77 | -11.4 | mV/°C | -30°C ≤ TA ≤ 100°C | 4 | |
| Vout Drive Capability (push-pull output current drain) | 500 | μA | 4 | ||||
| Load Regulation | 0.5 | mV | Source ≤500μA | 4 | |||
| Output Impedance | 1 | Ω | 4 | ||||
| Output Voltage at 0°C | 1.8639 | V | 4 | ||||
| Supply Sensitivity | 0.1 | °C/V | 4 | ||||
| Operation Current | Iconv | 20 | μA | 4 | |||
| Shutdown Current | ISD | 0.1 | μA | VDD≤0.6V | 4 | ||
| Temperature Coefficient of Quiescent Current | -44 | nA/°C | 4 | ||||
| Stirred Oil Thermal Response Time to 63% of Final Value (Package Only) | 0.418 | s | 4 | ||||
| Supply Voltage | VDD | -0.3 | 6.5 | V | 3 | ||
| Output Voltage | Vout | -0.3 | V | 3 | |||
| Storage Temperature | -60 | 155 | °C | 3 | |||
| Operation Temperature | TBoperation | -55 | 130 | °C | 3 | ||
| Maximum Junction Temperature | 155 | °C | 3 | ||||
| ESD Susceptibility HBM | -4.5 | 4.5 | KV | 3 | |||
| ESD Susceptibility CDM | -0.5 | 0.5 | KV | 3 |
CAD (KiCad official)
- Symbol:
NST20H-DSCR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
nst20h-dscr-etched.step/nst20h-dscr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nst20h-dscr.step/nst20h-dscr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NOVOSENSE datasheet (14 pp, sha256
d494f47b8b81e7b9, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).