main
History Download
Ray Publish 0.1.0 ba659fc

NSI6602C-DSWR

NOVOSENSE · Gate Drive ICs · SOP-16-300mil

NSI6602C-DSWR from NOVOSENSE, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INA input TTL/CMOS compatible input signal for channel A with internal pull-down to GND; connect to GND if not used.
2 INB input TTL/CMOS compatible input signal for channel B with internal pull-down to GND; connect to GND if not used.
3 VDDI power_in Input-side supply voltage (3 V to 5.5 V recommended); place a bypass capacitor from this pin to GND as close as possible.
4 GND power_in Input-side ground reference.
5 DISABLE input Disables the isolator inputs and driver outputs when asserted high, enables them when low or left open; connect to GND if not used.
6 DT input Programmable deadtime control: tie to VDDI for no deadtime, or place a 1 kΩ to 200 kΩ resistor RDT to GND with tDT (ns) ≈ 10 × RDT (kΩ), with a low-ESR capacitor of 2.2 nF or above in parallel.
7 NC unconnected Not connected.
8 VDDI power_in Input-side supply voltage (3 V to 5.5 V recommended); place a bypass capacitor from this pin to GND as close as possible.
9 GNDB power_in Ground for output channel B.
10 OUTB output Output gate driver for channel B.
11 VDDB power_in Supply voltage for channel B (driver side, 14.2 V to 25 V recommended for NSi6602C).
12 NC unconnected Not connected.
13 NC unconnected Not connected.
14 GNDA power_in Ground for output channel A.
15 OUTA output Output gate driver for channel A.
16 VDDA power_in Supply voltage for channel A (driver side, 14.2 V to 25 V recommended for NSi6602C).

Key specifications

Parameter Value
Manufacturer NOVOSENSE
Package SOP-16-300mil
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Driver Side Supply Voltage (NSi6602C, 13V UVLO) VDDA to GNDA, VDDB to GNDB 14.2 25 V NSi6602C 6
Input Side Supply Voltage VDDI to GNDI 3 5.5 V 6
Ambient Temperature Ta -40 125 °C 6
Input Signal Voltage INA, INB, DIS, DT 0 V Upper limit is VVDDI (not numeric) 6
Input Side Supply Voltage VDDI to GNDI -0.3 6 V 5
Output Side Supply Voltage VDDA to GNDA, VDDB to GNDB -0.3 30 V 5
Input Signal Voltage INA, INB, DIS, DT to GNDI -0.3 V Upper limit is VVDDI+0.3 (not numeric) 5
Input Signal Voltage transient INA, INB, DIS, DT to GNDI -5 V Transient for 50ns; upper limit VVDDI+0.3 (not numeric) 5
Output Signal Voltage OUTA to GNDA, OUTB to GNDB -0.3 V Upper limit is VVDDA+0.3 / VVDDB+0.3 (not numeric) 5
Output Signal Voltage transient OUTA to GNDA, OUTB to GNDB -2 V Transient for 200ns; upper limit VVDDA+0.3 / VVDDB+0.3 (not numeric) 6
Channel A to Channel B Voltage GNDA to GNDB 1500 V SOP16 & SOW16 package 6
Junction Temperature TJ -40 150 °C 6
Storage Temperature Tstg -65 150 °C 6
Electrostatic discharge HBM HBM -4000 4000 V all pins 6
Electrostatic discharge CDM CDM -1500 1500 V 6
Junction-to-ambient thermal resistance RJA 97 °C/W SOW16/SOW14 package, JESD51-3 1s board 6
Junction-to-case(top) thermal resistance RJC(top) 23.3 °C/W SOW16/SOW14 package 6
Junction-to-top characterization parameter ΨJT 35.8 °C/W SOW16/SOW14 package 6
Junction-to-board characterization parameter ΨJB 39 °C/W SOW16/SOW14 package 6
VDDI Quiescent Current IVDDIQ 0.75 2 mA INA=0, INB=0 7
VDDI Operating Current IVDDI 1.8 mA Input frequency 500kHz, COUTA/B=15pF 7
VDDI UVLO Rising Threshold VVDDI_ON 2.35 2.55 2.75 V 7
VDDI UVLO Falling Threshold VVDDI_OFF 2.15 2.35 2.55 V 7
VDDI UVLO Hysteresis VVDDI_HYS 0.2 V 7
Output Side Supply Voltage VVDDA, VVDDB 25 V Minimum defined by UVLO 7
VDDA/B Quiescent Current, per Channel IVDDAQ, IVDDBQ 1.6 2.5 mA INA=0, INB=0, VDDx=15V for 13V UVLO 7
VDDA/B Operation Current, per Channel IVDDA, IVDDB 3.2 mA 100pF, 500kHz, VDDx=15V for 13V UVLO 7
VDDA/B UVLO Rising Threshold (13V) VVDDA_ON, VVDDB_ON 12.7 13.2 13.7 V NSi6602C (13V) 7
VDDA/B UVLO Falling Threshold (13V) VVDDA_OFF, VVDDB_OFF 11.7 12.2 12.7 V NSi6602C (13V) 7
VDDA/B UVLO Hysteresis (13V) VVDDA_HYS, VVDDB_HYS 1 V NSi6602C (13V) 7
Input Pin Pull Down Resistance, INA, INB RINA_PD, RINB_PD 100 kΩ 7
Input Pin Pull Down Resistance, DIS (EN) RDIS_PD 100 kΩ 7
Logic High Input Threshold VINA_H, VINB_H, VDIS_H 1.7 2 V 7
Logic Low Input Threshold VINA_L, VINB_L, VDIS_L 0.8 1.1 V 7
Input Hysteresis VINA_HYS, VINB_HYS, VDIS_HYS 0.6 V 8
Logic High Output Voltage VVDDA-VOUTA_H, VVDDB-VOUTB_H 0.34 V Iout = 100mA 8
Logic Low Output Voltage VOUTA_L, VOUTB_L 55 mV Iout = -100mA 8
Output Source Resistance ROUTA_H, ROUTB_H 3.4 Ω Iout = 100mA 8
Output Sink Resistance ROUTA_L, ROUTB_L 0.55 Ω Iout = -100mA 8
Peak Output Source Current IOUTA+, IOUTB+ 4 A 8
Peak Output Sink Current IOUTA-, IOUTB- 6 A 8
Minimum Pulse Width tPWmin 10 15 ns COUTA/B = 0 pF 8
Propagation Delay tPDHL, tPDLH 10 25 35 ns 8
Pulse Width Distortion /tPDLH-tPDHL/ 6 ns 8
Channel to Channel Delay Matching tDMLH, tDMHL 5 ns 8
Programmed Deadtime tDT 160 200 240 ns tDT(ns)=10*R(kΩ); Test for R = 20kΩ 8
Output Rise Time (20% to 80%) tR 7 16 ns COUTA/B=1.8nF, verified by design 8
Output Fall Time (90% to 10%) tF 6 12 ns COUTA/B=1.8nF, verified by design 8
Shutdown Time from Disable True tDIS 40 ns 8
Recovery Time from Disable False tEN 40 ns 8
VDDI Power-up Time Delay tstart_VDDI 8.5 15 us INA or INB tied to VDDI 8
VDDA/B Power-up Time Delay tstart_VDDA, tstart_VDDB 18 30 us COUTA/B=1.8nF; INA or INB tied to VDDI 8
Common Mode Transient Immunity CMTI 100 150 kV/us verified by design 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper  Large amount of copper should be placed at VDDA/B pin and GNDA/B pin for thermal dissipation. 23

CAD (KiCad official)

  • Symbol: NSI6602C-DSWR
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: nsi6602c-dswr-etched.step / nsi6602c-dswr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nsi6602c-dswr.step / nsi6602c-dswr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NOVOSENSE datasheet (33 pp, sha256 d1edc0cc94276c0c, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF