component
NSI6602C-DSWR
Public Made by Adomby adom
NOVOSENSE Gate Drive ICs, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
NSI6602C-DSWR
NOVOSENSE · Gate Drive ICs · SOP-16-300mil
NSI6602C-DSWR from NOVOSENSE, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INA | input | TTL/CMOS compatible input signal for channel A with internal pull-down to GND; connect to GND if not used. |
| 2 | INB | input | TTL/CMOS compatible input signal for channel B with internal pull-down to GND; connect to GND if not used. |
| 3 | VDDI | power_in | Input-side supply voltage (3 V to 5.5 V recommended); place a bypass capacitor from this pin to GND as close as possible. |
| 4 | GND | power_in | Input-side ground reference. |
| 5 | DISABLE | input | Disables the isolator inputs and driver outputs when asserted high, enables them when low or left open; connect to GND if not used. |
| 6 | DT | input | Programmable deadtime control: tie to VDDI for no deadtime, or place a 1 kΩ to 200 kΩ resistor RDT to GND with tDT (ns) ≈ 10 × RDT (kΩ), with a low-ESR capacitor of 2.2 nF or above in parallel. |
| 7 | NC | unconnected | Not connected. |
| 8 | VDDI | power_in | Input-side supply voltage (3 V to 5.5 V recommended); place a bypass capacitor from this pin to GND as close as possible. |
| 9 | GNDB | power_in | Ground for output channel B. |
| 10 | OUTB | output | Output gate driver for channel B. |
| 11 | VDDB | power_in | Supply voltage for channel B (driver side, 14.2 V to 25 V recommended for NSi6602C). |
| 12 | NC | unconnected | Not connected. |
| 13 | NC | unconnected | Not connected. |
| 14 | GNDA | power_in | Ground for output channel A. |
| 15 | OUTA | output | Output gate driver for channel A. |
| 16 | VDDA | power_in | Supply voltage for channel A (driver side, 14.2 V to 25 V recommended for NSi6602C). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NOVOSENSE |
| Package | SOP-16-300mil |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Driver Side Supply Voltage (NSi6602C, 13V UVLO) | VDDA to GNDA, VDDB to GNDB | 14.2 | 25 | V | NSi6602C | 6 | |
| Input Side Supply Voltage | VDDI to GNDI | 3 | 5.5 | V | 6 | ||
| Ambient Temperature | Ta | -40 | 125 | °C | 6 | ||
| Input Signal Voltage | INA, INB, DIS, DT | 0 | V | Upper limit is VVDDI (not numeric) | 6 | ||
| Input Side Supply Voltage | VDDI to GNDI | -0.3 | 6 | V | 5 | ||
| Output Side Supply Voltage | VDDA to GNDA, VDDB to GNDB | -0.3 | 30 | V | 5 | ||
| Input Signal Voltage | INA, INB, DIS, DT to GNDI | -0.3 | V | Upper limit is VVDDI+0.3 (not numeric) | 5 | ||
| Input Signal Voltage transient | INA, INB, DIS, DT to GNDI | -5 | V | Transient for 50ns; upper limit VVDDI+0.3 (not numeric) | 5 | ||
| Output Signal Voltage | OUTA to GNDA, OUTB to GNDB | -0.3 | V | Upper limit is VVDDA+0.3 / VVDDB+0.3 (not numeric) | 5 | ||
| Output Signal Voltage transient | OUTA to GNDA, OUTB to GNDB | -2 | V | Transient for 200ns; upper limit VVDDA+0.3 / VVDDB+0.3 (not numeric) | 6 | ||
| Channel A to Channel B Voltage | GNDA to GNDB | 1500 | V | SOP16 & SOW16 package | 6 | ||
| Junction Temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage Temperature | Tstg | -65 | 150 | °C | 6 | ||
| Electrostatic discharge HBM | HBM | -4000 | 4000 | V | all pins | 6 | |
| Electrostatic discharge CDM | CDM | -1500 | 1500 | V | 6 | ||
| Junction-to-ambient thermal resistance | RJA | 97 | °C/W | SOW16/SOW14 package, JESD51-3 1s board | 6 | ||
| Junction-to-case(top) thermal resistance | RJC(top) | 23.3 | °C/W | SOW16/SOW14 package | 6 | ||
| Junction-to-top characterization parameter | ΨJT | 35.8 | °C/W | SOW16/SOW14 package | 6 | ||
| Junction-to-board characterization parameter | ΨJB | 39 | °C/W | SOW16/SOW14 package | 6 | ||
| VDDI Quiescent Current | IVDDIQ | 0.75 | 2 | mA | INA=0, INB=0 | 7 | |
| VDDI Operating Current | IVDDI | 1.8 | mA | Input frequency 500kHz, COUTA/B=15pF | 7 | ||
| VDDI UVLO Rising Threshold | VVDDI_ON | 2.35 | 2.55 | 2.75 | V | 7 | |
| VDDI UVLO Falling Threshold | VVDDI_OFF | 2.15 | 2.35 | 2.55 | V | 7 | |
| VDDI UVLO Hysteresis | VVDDI_HYS | 0.2 | V | 7 | |||
| Output Side Supply Voltage | VVDDA, VVDDB | 25 | V | Minimum defined by UVLO | 7 | ||
| VDDA/B Quiescent Current, per Channel | IVDDAQ, IVDDBQ | 1.6 | 2.5 | mA | INA=0, INB=0, VDDx=15V for 13V UVLO | 7 | |
| VDDA/B Operation Current, per Channel | IVDDA, IVDDB | 3.2 | mA | 100pF, 500kHz, VDDx=15V for 13V UVLO | 7 | ||
| VDDA/B UVLO Rising Threshold (13V) | VVDDA_ON, VVDDB_ON | 12.7 | 13.2 | 13.7 | V | NSi6602C (13V) | 7 |
| VDDA/B UVLO Falling Threshold (13V) | VVDDA_OFF, VVDDB_OFF | 11.7 | 12.2 | 12.7 | V | NSi6602C (13V) | 7 |
| VDDA/B UVLO Hysteresis (13V) | VVDDA_HYS, VVDDB_HYS | 1 | V | NSi6602C (13V) | 7 | ||
| Input Pin Pull Down Resistance, INA, INB | RINA_PD, RINB_PD | 100 | kΩ | 7 | |||
| Input Pin Pull Down Resistance, DIS (EN) | RDIS_PD | 100 | kΩ | 7 | |||
| Logic High Input Threshold | VINA_H, VINB_H, VDIS_H | 1.7 | 2 | V | 7 | ||
| Logic Low Input Threshold | VINA_L, VINB_L, VDIS_L | 0.8 | 1.1 | V | 7 | ||
| Input Hysteresis | VINA_HYS, VINB_HYS, VDIS_HYS | 0.6 | V | 8 | |||
| Logic High Output Voltage | VVDDA-VOUTA_H, VVDDB-VOUTB_H | 0.34 | V | Iout = 100mA | 8 | ||
| Logic Low Output Voltage | VOUTA_L, VOUTB_L | 55 | mV | Iout = -100mA | 8 | ||
| Output Source Resistance | ROUTA_H, ROUTB_H | 3.4 | Ω | Iout = 100mA | 8 | ||
| Output Sink Resistance | ROUTA_L, ROUTB_L | 0.55 | Ω | Iout = -100mA | 8 | ||
| Peak Output Source Current | IOUTA+, IOUTB+ | 4 | A | 8 | |||
| Peak Output Sink Current | IOUTA-, IOUTB- | 6 | A | 8 | |||
| Minimum Pulse Width | tPWmin | 10 | 15 | ns | COUTA/B = 0 pF | 8 | |
| Propagation Delay | tPDHL, tPDLH | 10 | 25 | 35 | ns | 8 | |
| Pulse Width Distortion | /tPDLH-tPDHL/ | 6 | ns | 8 | |||
| Channel to Channel Delay Matching | tDMLH, tDMHL | 5 | ns | 8 | |||
| Programmed Deadtime | tDT | 160 | 200 | 240 | ns | tDT(ns)=10*R(kΩ); Test for R = 20kΩ | 8 |
| Output Rise Time (20% to 80%) | tR | 7 | 16 | ns | COUTA/B=1.8nF, verified by design | 8 | |
| Output Fall Time (90% to 10%) | tF | 6 | 12 | ns | COUTA/B=1.8nF, verified by design | 8 | |
| Shutdown Time from Disable True | tDIS | 40 | ns | 8 | |||
| Recovery Time from Disable False | tEN | 40 | ns | 8 | |||
| VDDI Power-up Time Delay | tstart_VDDI | 8.5 | 15 | us | INA or INB tied to VDDI | 8 | |
| VDDA/B Power-up Time Delay | tstart_VDDA, tstart_VDDB | 18 | 30 | us | COUTA/B=1.8nF; INA or INB tied to VDDI | 8 | |
| Common Mode Transient Immunity | CMTI | 100 | 150 | kV/us | verified by design | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Large amount of copper should be placed at VDDA/B pin and GNDA/B pin for thermal dissipation. | 23 |
CAD (KiCad official)
- Symbol:
NSI6602C-DSWR - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
nsi6602c-dswr-etched.step/nsi6602c-dswr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsi6602c-dswr.step/nsi6602c-dswr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NOVOSENSE datasheet (33 pp, sha256
d1edc0cc94276c0c, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).