Generated by kicad-footprint-generator · KiCad file format 20260206
NSG21277
WXNSIC · Gate Drivers · SOP-10
NSG21277 from WXNSIC, in a SOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Low-side supply pin, recommended operating range 10 V to 20 V referenced to VSS (absolute maximum -0.3 V to 22 V). |
| 2 | IN | input | Logic input in phase with HO, with VIH minimum 2.5 V and VIL maximum 0.8 V, and an input range of 0 V to VCC; compatible with 3.3 V, 5 V and 15 V logic. |
| 3 | FAULT | output | Overcurrent shutdown report output with negative logic (active low, open-drain), with a typical low-state on-resistance Ron,FLT of 125 Ω. |
| 4 | VSS | power_in | Ground reference for the low-side circuit; all voltage ratings and the VCC and IN parameters are referenced to VSS. |
| 5 | NC | unconnected | No connection (empty pin). |
| 6 | VS | power_in | High-side floating ground reference; recommended range -5 V to 300 V, and it tolerates a transient of -50 V for 50 ns pulses and dVS/dt up to ±50 V/ns. |
| 7 | CS | input | Overcurrent protection sense input with a positive-going threshold VCSTH+ of 1.5 V to 2.1 V (typical 1.8 V), and an operating range of VS to VS+5 V. |
| 8 | HOL | output | High-side gate driver current sink output, with an output sink current IO- of 3 A minimum (4.5 A typical) for pulses up to 10 µs. |
| 9 | HOH | output | High-side gate driver current source output, with an output source current IO+ of 2.5 A minimum (3.5 A typical) for pulses up to 10 µs. |
| 10 | VB | power_in | High-side floating supply, recommended VS+12 V to VS+20 V (absolute maximum -0.3 V to 322 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WXNSIC |
| Package | SOP-10 |
| Category | Motor Driver ICs |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
NSG21277 - Footprint:
Package_SO:SOIC-10_3.9x4.9mm_P1mm - 3D model: SOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
nsg21277-etched.step/nsg21277-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsg21277.step/nsg21277.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WXNSIC datasheet (12 pp, sha256
af9653723f83b4c8, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).