Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NSG21277

WXNSIC · Gate Drivers · SOP-10

NSG21277 from WXNSIC, in a SOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Low-side supply pin, recommended operating range 10 V to 20 V referenced to VSS (absolute maximum -0.3 V to 22 V).
2 IN input Logic input in phase with HO, with VIH minimum 2.5 V and VIL maximum 0.8 V, and an input range of 0 V to VCC; compatible with 3.3 V, 5 V and 15 V logic.
3 FAULT output Overcurrent shutdown report output with negative logic (active low, open-drain), with a typical low-state on-resistance Ron,FLT of 125 Ω.
4 VSS power_in Ground reference for the low-side circuit; all voltage ratings and the VCC and IN parameters are referenced to VSS.
5 NC unconnected No connection (empty pin).
6 VS power_in High-side floating ground reference; recommended range -5 V to 300 V, and it tolerates a transient of -50 V for 50 ns pulses and dVS/dt up to ±50 V/ns.
7 CS input Overcurrent protection sense input with a positive-going threshold VCSTH+ of 1.5 V to 2.1 V (typical 1.8 V), and an operating range of VS to VS+5 V.
8 HOL output High-side gate driver current sink output, with an output sink current IO- of 3 A minimum (4.5 A typical) for pulses up to 10 µs.
9 HOH output High-side gate driver current source output, with an output source current IO+ of 2.5 A minimum (3.5 A typical) for pulses up to 10 µs.
10 VB power_in High-side floating supply, recommended VS+12 V to VS+20 V (absolute maximum -0.3 V to 322 V).

Key specifications

Parameter Value
Manufacturer WXNSIC
Package SOP-10
Category Motor Driver ICs
Pins 10

CAD (KiCad official)

  • Symbol: NSG21277
  • Footprint: Package_SO:SOIC-10_3.9x4.9mm_P1mm
  • 3D model: SOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: nsg21277-etched.step / nsg21277-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nsg21277.step / nsg21277.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: WXNSIC datasheet (12 pp, sha256 af9653723f83b4c8, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF