main
History Download
Ray ns4248: specified limits as data (metadata.characteristics, 40 rows from the datasheet) 0e43609

NS4248

Shenzhen Nsiway Tech · Audio Power OpAmps · SOP-16

NS4248 from Shenzhen Nsiway Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SD input Shutdown control, active high. Drive high to shut down the amplifier; drive low (or leave low) for normal operation.
2 GND power_in Power ground reference.
3 VoLP output Left channel Class-D output, positive side of the BTL speaker bridge. Connects to speaker (8Ω typical) via optional LC filter.
4 VDD power_in Power supply input, 2.2V to 5.25V operating range. Bypass with 10µF bulk + 0.1µF ceramic to GND.
5 VoLN output Left channel Class-D output, negative side of the BTL speaker bridge. In headphone mode, single-ended left channel output.
6 INLN input Left channel inverting audio input. AC-couple audio source through 0.1µF Ci in series with 20kΩ Ri to set gain (feedback via internal Rf).
7 GND power_in Power ground reference.
8 NC unconnected No connection. Leave floating.
9 NC unconnected No connection. Leave floating.
10 Bypass passive Internal mid-supply bias bypass node. Decouple to GND with 1µF ceramic capacitor (Cb) to filter reference noise for the input stage.
11 INRN input Right channel inverting audio input. AC-couple audio source through 0.1µF Ci in series with 20kΩ Ri to set gain (feedback via internal Rf).
12 VoRN output Right channel Class-D output, negative side of the BTL speaker bridge. In headphone mode, single-ended right channel output.
13 VDD power_in Power supply input (paralleled with pin 4), 2.2V to 5.25V. Tie both VDD pins together at the die-side bypass network.
14 VoRP output Right channel Class-D output, positive side of the BTL speaker bridge. Connects to speaker (8Ω typical) via optional LC filter.
15 GND power_in Ground reference.
16 HP-IN input Headphone mode control input. Drives the amplifier between BTL speaker mode and single-ended stereo headphone mode; typically fed from a headphone-jack detect switch through an R1/R2 divider (51kΩ/330kΩ in the reference schematic). VIH ≥ 1.4V, VIL ≤ 0.4V.

Key specifications

Parameter Value
Manufacturer Shenzhen Nsiway Tech
Package SOP-16
Category Op-amp/Cmp
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage range (absolute maximum rating) 1.8 6 V 3
Input voltage range -0.3 V 3
ESD voltage (HBM) 8000 V HBM 3
Operating temperature range -40 85 ℃ 3
Storage temperature range -65 150 ℃ 3
Maximum junction temperature 150 ℃ 3
Soldering temperature 220 ℃ 10 s 3
Power supply voltage VDD 2.2 5.25 V 4
Output offset voltage VOS 10 40 mV VIN=0V, VDD=3.0 to 5.25V 4
CTRL input high voltage VIH 1.4 V 4
CTRL input low voltage VIL 0 0.4 V 4
Quiescent supply current IDD 11 mA VIN=0V,VDD-3.6V,No Load 4
Quiescent supply current IDD 20 mA VIN=0V,VDD-5.0V,No Load 4
Standby current IMUTE 8 mA VIN=0V,VDD -3.6V, V/MUTE =0V,No load 4
Standby current IMUTE 16 mA VIN=0V,VDD -5.0V, V/MUTE =0V,No load 4
Shutdown leakage current ISD 1 µA SD=0V 4
Output resistance RO 3 KΩ 4
Modulation frequency fSW 450 kHz VDD =2.2V to 5.25V 4
Power supply rejection ratio PSRR -80 dB 217Hz 4
Power supply rejection ratio PSRR -72 dB 20KHz 4
Common-mode rejection ratio CMRR -70 dB 4
Efficiency η 85 % Po=1.0W,RL=4Ω , VDD=3.6V,f=1kHz 4
Shutdown leakage current (duplicate row label check) ISD 1 µA SD=0V 4
Headphone output power Po 85 mW VDD=5V,f=1KHz,RL=8Ω, THD+N=0.1% 4
Headphone output power Po 340 mW VDD=5V,f=1KHz,RL=8Ω, THD+N=1.0% 4
Headphone output power Po 440 mW VDD=5V,f=1KHz,RL=8Ω, THD+N=10% 4
Headphone THD+N THD+N 0.1 % AV=12,20Hz≤f≤20KHz, RL=8Ω,Po=75mW 4
Channel crosstalk (stereo separation) XTALK -85 dB RL=8Ω,Po=340mW 4
Headphone signal-to-noise ratio SNR 90 dB RL=8Ω,Po=340mW 4
Speaker THD+N THD+N 0.1 % AVD=2,20Hz≤f≤20KHz, RL=8Ω,Po=0.5W 4
Speaker signal-to-noise ratio SNR 90 dB RL=8Ω,Po=0.5W 4
Stereo isolation (speaker mode) -80 dB RL=8Ω,Po=0.5W 5
Speaker output power at THD+N=1% PO 2.5 W VDD=5V,f=1KHz,THD+N=1%, RL=3Ω 5
Speaker output power at THD+N=1% PO 2 W VDD=5V,f=1KHz,THD+N=1%, RL=4Ω 5
Speaker output power at THD+N=1% PO 1.2 W VDD=5V,f=1KHz,THD+N=1%, RL=8Ω 5
Speaker output power at THD+N=10% PO 3 W VDD=5V,f=1KHz,THD+N=10%, RL=3Ω 5
Speaker output power at THD+N=10% PO 2.5 W VDD=5V,f=1KHz,THD+N=10%, RL=4Ω 5
Speaker output power at THD+N=10% PO 1.5 W VDD=5V,f=1KHz,THD+N=10%, RL=8Ω 5
Junction-to-case thermal resistance (SOP-16) θJC 20 oC/W SOP-16 package 3
Junction-to-ambient thermal resistance (SOP-16) θJA 80 oC/W SOP-16 package 3

CAD (KiCad official)

  • Symbol: NS4248
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Nsiway Tech datasheet (14 pp, sha256 62358b4e793afab5, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF