Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | |
| viewers | |
| ns4248.glb | |
| ns4248.kicad_mod | |
| ns4248.kicad_sym | |
| ns4248.lbr | |
| ns4248.step | |
| package.json | |
| page.json | |
| README.md |
NS4248
Shenzhen Nsiway Tech · Audio Power OpAmps · SOP-16
NS4248 from Shenzhen Nsiway Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown control, active high. Drive high to shut down the amplifier; drive low (or leave low) for normal operation. |
| 2 | GND | power_in | Power ground reference. |
| 3 | VoLP | output | Left channel Class-D output, positive side of the BTL speaker bridge. Connects to speaker (8Ω typical) via optional LC filter. |
| 4 | VDD | power_in | Power supply input, 2.2V to 5.25V operating range. Bypass with 10µF bulk + 0.1µF ceramic to GND. |
| 5 | VoLN | output | Left channel Class-D output, negative side of the BTL speaker bridge. In headphone mode, single-ended left channel output. |
| 6 | INLN | input | Left channel inverting audio input. AC-couple audio source through 0.1µF Ci in series with 20kΩ Ri to set gain (feedback via internal Rf). |
| 7 | GND | power_in | Power ground reference. |
| 8 | NC | unconnected | No connection. Leave floating. |
| 9 | NC | unconnected | No connection. Leave floating. |
| 10 | Bypass | passive | Internal mid-supply bias bypass node. Decouple to GND with 1µF ceramic capacitor (Cb) to filter reference noise for the input stage. |
| 11 | INRN | input | Right channel inverting audio input. AC-couple audio source through 0.1µF Ci in series with 20kΩ Ri to set gain (feedback via internal Rf). |
| 12 | VoRN | output | Right channel Class-D output, negative side of the BTL speaker bridge. In headphone mode, single-ended right channel output. |
| 13 | VDD | power_in | Power supply input (paralleled with pin 4), 2.2V to 5.25V. Tie both VDD pins together at the die-side bypass network. |
| 14 | VoRP | output | Right channel Class-D output, positive side of the BTL speaker bridge. Connects to speaker (8Ω typical) via optional LC filter. |
| 15 | GND | power_in | Ground reference. |
| 16 | HP-IN | input | Headphone mode control input. Drives the amplifier between BTL speaker mode and single-ended stereo headphone mode; typically fed from a headphone-jack detect switch through an R1/R2 divider (51kΩ/330kΩ in the reference schematic). VIH ≥ 1.4V, VIL ≤ 0.4V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Nsiway Tech |
| Package | SOP-16 |
| Category | Op-amp/Cmp |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage range (absolute maximum rating) | 1.8 | 6 | V | 3 | |||
| Input voltage range | -0.3 | V | 3 | ||||
| ESD voltage (HBM) | 8000 | V | HBM | 3 | |||
| Operating temperature range | -40 | 85 | ℃ | 3 | |||
| Storage temperature range | -65 | 150 | ℃ | 3 | |||
| Maximum junction temperature | 150 | ℃ | 3 | ||||
| Soldering temperature | 220 | ℃ | 10 s | 3 | |||
| Power supply voltage | VDD | 2.2 | 5.25 | V | 4 | ||
| Output offset voltage | VOS | 10 | 40 | mV | VIN=0V, VDD=3.0 to 5.25V | 4 | |
| CTRL input high voltage | VIH | 1.4 | V | 4 | |||
| CTRL input low voltage | VIL | 0 | 0.4 | V | 4 | ||
| Quiescent supply current | IDD | 11 | mA | VIN=0V,VDD-3.6V,No Load | 4 | ||
| Quiescent supply current | IDD | 20 | mA | VIN=0V,VDD-5.0V,No Load | 4 | ||
| Standby current | IMUTE | 8 | mA | VIN=0V,VDD -3.6V, V/MUTE =0V,No load | 4 | ||
| Standby current | IMUTE | 16 | mA | VIN=0V,VDD -5.0V, V/MUTE =0V,No load | 4 | ||
| Shutdown leakage current | ISD | 1 | µA | SD=0V | 4 | ||
| Output resistance | RO | 3 | KΩ | 4 | |||
| Modulation frequency | fSW | 450 | kHz | VDD =2.2V to 5.25V | 4 | ||
| Power supply rejection ratio | PSRR | -80 | dB | 217Hz | 4 | ||
| Power supply rejection ratio | PSRR | -72 | dB | 20KHz | 4 | ||
| Common-mode rejection ratio | CMRR | -70 | dB | 4 | |||
| Efficiency | η | 85 | % | Po=1.0W,RL=4Ω , VDD=3.6V,f=1kHz | 4 | ||
| Shutdown leakage current (duplicate row label check) | ISD | 1 | µA | SD=0V | 4 | ||
| Headphone output power | Po | 85 | mW | VDD=5V,f=1KHz,RL=8Ω, THD+N=0.1% | 4 | ||
| Headphone output power | Po | 340 | mW | VDD=5V,f=1KHz,RL=8Ω, THD+N=1.0% | 4 | ||
| Headphone output power | Po | 440 | mW | VDD=5V,f=1KHz,RL=8Ω, THD+N=10% | 4 | ||
| Headphone THD+N | THD+N | 0.1 | % | AV=12,20Hz≤f≤20KHz, RL=8Ω,Po=75mW | 4 | ||
| Channel crosstalk (stereo separation) | XTALK | -85 | dB | RL=8Ω,Po=340mW | 4 | ||
| Headphone signal-to-noise ratio | SNR | 90 | dB | RL=8Ω,Po=340mW | 4 | ||
| Speaker THD+N | THD+N | 0.1 | % | AVD=2,20Hz≤f≤20KHz, RL=8Ω,Po=0.5W | 4 | ||
| Speaker signal-to-noise ratio | SNR | 90 | dB | RL=8Ω,Po=0.5W | 4 | ||
| Stereo isolation (speaker mode) | -80 | dB | RL=8Ω,Po=0.5W | 5 | |||
| Speaker output power at THD+N=1% | PO | 2.5 | W | VDD=5V,f=1KHz,THD+N=1%, RL=3Ω | 5 | ||
| Speaker output power at THD+N=1% | PO | 2 | W | VDD=5V,f=1KHz,THD+N=1%, RL=4Ω | 5 | ||
| Speaker output power at THD+N=1% | PO | 1.2 | W | VDD=5V,f=1KHz,THD+N=1%, RL=8Ω | 5 | ||
| Speaker output power at THD+N=10% | PO | 3 | W | VDD=5V,f=1KHz,THD+N=10%, RL=3Ω | 5 | ||
| Speaker output power at THD+N=10% | PO | 2.5 | W | VDD=5V,f=1KHz,THD+N=10%, RL=4Ω | 5 | ||
| Speaker output power at THD+N=10% | PO | 1.5 | W | VDD=5V,f=1KHz,THD+N=10%, RL=8Ω | 5 | ||
| Junction-to-case thermal resistance (SOP-16) | θJC | 20 | oC/W | SOP-16 package | 3 | ||
| Junction-to-ambient thermal resistance (SOP-16) | θJA | 80 | oC/W | SOP-16 package | 3 |
CAD (KiCad official)
- Symbol:
NS4248 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Nsiway Tech datasheet (14 pp, sha256
62358b4e793afab5, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).