Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | |
| viewers | |
| ns4158-etched.fit.json | |
| ns4158-etched.glb | |
| ns4158-etched.step | |
| ns4158.glb | |
| ns4158.kicad_mod | |
| ns4158.kicad_sym | |
| ns4158.lbr | |
| ns4158.step | |
| package.json | |
| page.json | |
| README.md |
NS4158
Shenzhen Nsiway Tech · Audio Power OpAmps · SOIC-8
NS4158 from Shenzhen Nsiway Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CTRL | input | Operating mode control input. Selects between normal mode, anti-distortion mode, and shutdown via one-wire pulse (software) or DC voltage level (hardware). Thresholds referenced to VDD (e.g. VIH ≥ 0.4·VDD normal, ≥ 0.9·VDD anti-distortion; SHUTDOWN < 0.2 V). |
| 2 | Bypass | passive | Internal mid-supply bias bypass node. Connect a bypass capacitor (typ. 1 µF) from this pin to GND for PSRR and click/pop performance. |
| 3 | NC | unconnected | No connection. Leave floating or tie to GND. |
| 4 | INN | input | Inverting audio signal input. AC-coupled via input capacitor Ci and input resistor Ri to set closed-loop gain (Av = 2 · Rf_internal / Ri). |
| 5 | VoN | output | BTL PWM speaker output, negative side. Connect directly to one terminal of the loudspeaker; filterless PWM structure - no LC output filter required. |
| 6 | VDD | power_in | Supply voltage input, 3.0 V to 5.25 V (absolute max 5.5 V). Decouple with 100 µF bulk and 0.1 µF (104) ceramic to GND close to the pin. |
| 7 | GND | power_in | Power and signal ground return. |
| 8 | VoP | output | BTL PWM speaker output, positive side. Connect directly to the other terminal of the loudspeaker; filterless PWM structure - no LC output filter required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Nsiway Tech |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage (absolute maximum) | VDD | 2.8 | 5.5 | V | 6 | ||
| Storage temperature | -65 | 150 | °C | 6 | |||
| Input voltage | -0.3 | V | 6 | ||||
| ESD withstand voltage | 4000 | V | 6 | ||||
| Junction temperature | 150 | °C | 6 | ||||
| Soldering temperature | 220 | °C | 15 秒内 | 6 | |||
| Recommended operating temperature | -40 | 85 | °C | 6 | |||
| Recommended operating voltage | VDD | 3 | 5.25 | V | 6 | ||
| Power supply voltage | VDD | 3 | 5.25 | V | 6 | ||
| Quiescent supply current | IDD | 4 | mA | VDD=5.0V, VIN=0V, No load | 6 | ||
| Shutdown leakage current | ISD | 1 | µA | VCTRL=0V | 6 | ||
| Output offset voltage | VOS | 10 | 40 | mV | 6 | ||
| Output resistance | RO | 3 | K | 6 | |||
| Power supply rejection ratio | PSRR | -80 | dB | 217Hz | 6 | ||
| Power supply rejection ratio | PSRR | -72 | dB | 20KHz | 6 | ||
| Common-mode rejection ratio | CMRR | -70 | dB | 6 | |||
| Modulation frequency | fSW | 350 | kHz | VDD=3V to 5.25V | 6 | ||
| Efficiency | η | 90 | % | Po=2.5W, RL=4Ω, VDD=5V | 6 | ||
| Low-level input voltage, software mode (SHUTDOWN) | VIL | 0 | 0.2 | V | SHUTDOWN (软件设置模式) | 6 | |
| CTRL high-level time, software mode | THI | 1 | 12 | us | 软件设置模式 | 6 | |
| CTRL low-level time, software mode | TLO | 1 | 12 | us | 软件设置模式 | 6 | |
| CTRL shutdown time, software mode | TOFF | 100 | us | 软件设置模式 | 6 | ||
| CTRL threshold, anti-distortion mode (hardware mode) | VCTRL | 0.9 | V | 硬件设置模式, 防失真模式 | 6 | ||
| CTRL threshold, SHUTDOWN mode (hardware mode) | VCTRL | 0.2 | V | 硬件设置模式, SHUTDOWN模式 | 6 | ||
| Output power, normal mode | PO | 4 | W | THD+N=1%, f=1KHz, RL=2Ω | 7 | ||
| Output power, normal mode | PO | 3.2 | W | THD+N=1%, f=1KHz, RL=3Ω | 7 | ||
| Output power, normal mode | PO | 2.6 | W | THD+N=1%, f=1KHz, RL=4Ω | 7 | ||
| Output power, normal mode | PO | 4.8 | W | THD+N=10%, f=1KHz, RL=2Ω | 7 | ||
| Output power, normal mode | PO | 3.8 | W | THD+N=10%, f=1KHz, RL=3Ω | 7 | ||
| Output power, normal mode | PO | 3.1 | W | THD+N=10%, f=1KHz, RL=4Ω | 7 | ||
| Total harmonic distortion plus noise | THD+N | 0.5 | % | AVD=2, f=1kHz, RL=4Ω, PO=1.0W | 7 | ||
| Signal-to-noise ratio | SNR | 75 | dB | RL=4Ω, Po=1.0W | 7 | ||
| Attack time | TAT | 20 | ms | VDD=3.6V | 7 | ||
| Release time | TRL | 1.5 | s | VDD=3.6V | 7 | ||
| Maximum attenuation gain | AMAX | -10 | dB | 7 | |||
| Thermal resistance, junction-to-case (SOP8) | θJC | 20 | °C/W | 6 | |||
| Thermal resistance, junction-to-ambient (SOP8) | θJA | 80 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
NS4158 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ns4158-etched.step/ns4158-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ns4158.step/ns4158.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Nsiway Tech datasheet (16 pp, sha256
2cc1f040efd42265, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).