Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NS4158

Shenzhen Nsiway Tech · Audio Power OpAmps · SOIC-8

NS4158 from Shenzhen Nsiway Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CTRL input Operating mode control input. Selects between normal mode, anti-distortion mode, and shutdown via one-wire pulse (software) or DC voltage level (hardware). Thresholds referenced to VDD (e.g. VIH ≥ 0.4·VDD normal, ≥ 0.9·VDD anti-distortion; SHUTDOWN < 0.2 V).
2 Bypass passive Internal mid-supply bias bypass node. Connect a bypass capacitor (typ. 1 µF) from this pin to GND for PSRR and click/pop performance.
3 NC unconnected No connection. Leave floating or tie to GND.
4 INN input Inverting audio signal input. AC-coupled via input capacitor Ci and input resistor Ri to set closed-loop gain (Av = 2 · Rf_internal / Ri).
5 VoN output BTL PWM speaker output, negative side. Connect directly to one terminal of the loudspeaker; filterless PWM structure - no LC output filter required.
6 VDD power_in Supply voltage input, 3.0 V to 5.25 V (absolute max 5.5 V). Decouple with 100 µF bulk and 0.1 µF (104) ceramic to GND close to the pin.
7 GND power_in Power and signal ground return.
8 VoP output BTL PWM speaker output, positive side. Connect directly to the other terminal of the loudspeaker; filterless PWM structure - no LC output filter required.

Key specifications

Parameter Value
Manufacturer Shenzhen Nsiway Tech
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage (absolute maximum) VDD 2.8 5.5 V 6
Storage temperature -65 150 °C 6
Input voltage -0.3 V 6
ESD withstand voltage 4000 V 6
Junction temperature 150 °C 6
Soldering temperature 220 °C 15 秒内 6
Recommended operating temperature -40 85 °C 6
Recommended operating voltage VDD 3 5.25 V 6
Power supply voltage VDD 3 5.25 V 6
Quiescent supply current IDD 4 mA VDD=5.0V, VIN=0V, No load 6
Shutdown leakage current ISD 1 µA VCTRL=0V 6
Output offset voltage VOS 10 40 mV 6
Output resistance RO 3 K 6
Power supply rejection ratio PSRR -80 dB 217Hz 6
Power supply rejection ratio PSRR -72 dB 20KHz 6
Common-mode rejection ratio CMRR -70 dB 6
Modulation frequency fSW 350 kHz VDD=3V to 5.25V 6
Efficiency η 90 % Po=2.5W, RL=4Ω, VDD=5V 6
Low-level input voltage, software mode (SHUTDOWN) VIL 0 0.2 V SHUTDOWN (软件设置模式) 6
CTRL high-level time, software mode THI 1 12 us 软件设置模式 6
CTRL low-level time, software mode TLO 1 12 us 软件设置模式 6
CTRL shutdown time, software mode TOFF 100 us 软件设置模式 6
CTRL threshold, anti-distortion mode (hardware mode) VCTRL 0.9 V 硬件设置模式, 防失真模式 6
CTRL threshold, SHUTDOWN mode (hardware mode) VCTRL 0.2 V 硬件设置模式, SHUTDOWN模式 6
Output power, normal mode PO 4 W THD+N=1%, f=1KHz, RL=2Ω 7
Output power, normal mode PO 3.2 W THD+N=1%, f=1KHz, RL=3Ω 7
Output power, normal mode PO 2.6 W THD+N=1%, f=1KHz, RL=4Ω 7
Output power, normal mode PO 4.8 W THD+N=10%, f=1KHz, RL=2Ω 7
Output power, normal mode PO 3.8 W THD+N=10%, f=1KHz, RL=3Ω 7
Output power, normal mode PO 3.1 W THD+N=10%, f=1KHz, RL=4Ω 7
Total harmonic distortion plus noise THD+N 0.5 % AVD=2, f=1kHz, RL=4Ω, PO=1.0W 7
Signal-to-noise ratio SNR 75 dB RL=4Ω, Po=1.0W 7
Attack time TAT 20 ms VDD=3.6V 7
Release time TRL 1.5 s VDD=3.6V 7
Maximum attenuation gain AMAX -10 dB 7
Thermal resistance, junction-to-case (SOP8) θJC 20 °C/W 6
Thermal resistance, junction-to-ambient (SOP8) θJA 80 °C/W 6

CAD (KiCad official)

  • Symbol: NS4158
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ns4158-etched.step / ns4158-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ns4158.step / ns4158.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Nsiway Tech datasheet (16 pp, sha256 2cc1f040efd42265, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF