main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers nju7116f-te1: viewers rendered from the public page · Ray
nju7116f-te1-etched.glb nju7116f-te1: factory component page (tier=lcsc) · Ray
nju7116f-te1-etched.step nju7116f-te1: factory component page (tier=lcsc) · Ray
nju7116f-te1-hero.glb nju7116f-te1: hero GLB from the etched model (keeps the MPN mark) · Ray
nju7116f-te1-hero.overlay.json nju7116f-te1: hero GLB from the etched model (keeps the MPN mark) · Ray
nju7116f-te1.glb Publish 0.1.0 · Ray
nju7116f-te1.kicad_mod Publish 0.1.0 · Ray
nju7116f-te1.kicad_sym Publish 0.1.0 · Ray
nju7116f-te1.lbr Publish 0.1.0 · Ray
nju7116f-te1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

NJU7116F-TE1

JRC · Comparators · SOT-23-5

NJU7116F-TE1 from JRC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN- input Inverting comparator input; common mode input voltage range is 0 to 2.5V at VDD=3.0V and absolute maximum is -0.3 to 7V.
2 VSS power_in Negative supply (ground) pin; connect a decoupling capacitor between VDD and VSS.
3 IN+ input Non-inverting comparator input; common mode input voltage range is 0 to 2.5V at VDD=3.0V and absolute maximum is -0.3 to 7V.
4 OUT output CMOS push-pull comparator output with VOH of at least 2.7V at IOH=2mA and VOL of at most 0.3V at IOL=-2mA at VDD=3.0V.
5 VDD power_in Positive supply pin; operating range is 1.8V to 3.6V with an absolute maximum of 7V.

Key specifications

Parameter Value
Manufacturer JRC
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage VDD 1.8 3.6 V Ta=25°C, VDD=3.0V, RL=∞ 2
Input Offset Voltage VIO 2.5 mV VIN=1/2VDD 2
High Level Output Voltage VOH 2.7 V IOH=2mA 2
Low Level Output Voltage VOL 0.3 V IOL=-2mA 2
Common Mode Rejection Ratio CMR 50 dB VIC=1/2VDD 2
Supply Voltage Rejection Ratio SVR 50 dB VDD=1.8~3.6V 2
Operating Current IDD 1 1.5 μA No Load,VO=0V 2
Propagation Delay High to Low tPHL 1.2 2 μs Over Drive=100mV, VIC=0V, f=1kHz, CL=15pF 2
Propagation Delay Low to High tPLH 3.3 5 μs Over Drive=100mV, VIC=0V, f=1kHz, CL=15pF 2
Propagation Delay Time Lag tPD 2.1 3 μs tPLH- tPHL 2
Supply Voltage VDD 7 V Ta=25°C 2
Differential Input Voltage VID -7 7 V Ta=25°C; for supply voltage less than 7V, rating equals supply voltage 2
Common Mode Input Voltage VIC -0.3 7 V Ta=25°C; for supply voltage less than 7V, rating equals supply voltage 2
Power Dissipation SOT-23-5 (2-layer board) PD 390 mW EIA/JEDEC test board 2 layers FR-4 2
Power Dissipation SOT-23-5 (4-layer board) PD 520 mW EIA/JEDEC test board 4 layers FR-4 2
Operating Temperature Range Topr -40 105 °C 2
Storage Temperature Range Tstg -55 125 °C 2
Input Common Mode Voltage Range VICM 0 2.5 V printed 0~2.5 2
Input Offset Current IIO 1 pA 2
Input Bias Current IIB 1 pA 2
Output Signal Falling Time tTHL 15 ns Over Drive=100mV 2
Output Signal Rising Time tTLH 40 ns Over Drive=100mV 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: NJU7116F-TE1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.1 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: nju7116f-te1-etched.step / nju7116f-te1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nju7116f-te1.step / nju7116f-te1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JRC datasheet (7 pp, sha256 84100a36de6dab1e, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF