main
Ray Publish 0.1.0 3239f39
{
  "slug": "nis5420mt4txg",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Surge Suppressors, WDFN-10(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "tvs-fuse-board level protection",
    "nis5420mt4txg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nis5420mt4txg.kicad_sym",
    "nis5420mt4txg.kicad_mod",
    "nis5420mt4txg.glb",
    "nis5420mt4txg.step",
    "nis5420mt4txg.lbr",
    "docs/hero.png",
    "docs/nis5420mt4txg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "nis5420mt4txg-hero.glb",
    "nis5420mt4txg-hero.overlay.json"
  ],
  "component": {
    "mpn": "NIS5420MT4TXG",
    "manufacturer": "onsemi",
    "package": "WDFN-10(3x3)",
    "pin_count": 11,
    "category": "TVS/Fuse/Board Level Protection",
    "subcategory": "Surge Suppressors",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/nis5420mt4tx-d.pdf",
    "parts": {
      "symbol": "nis5420mt4txg.kicad_sym",
      "footprint": "nis5420mt4txg.kicad_mod",
      "model_3d": "nis5420mt4txg-hero.glb",
      "model_3d_step": "nis5420mt4txg.step",
      "lbr": "nis5420mt4txg.lbr",
      "model_3d_plain": "nis5420mt4txg.glb"
    },
    "distributor_links": {
      "lcsc": "C2902283",
      "digikey": "488-NIS5420MT4TXGTR-ND",
      "mouser": "863-NIS5420MT4TXG"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T00:31:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "488-NIS5420MT4TXGTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NIS5420MT4TXG",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Negative input voltage to the device, used as the internal reference for the IC."
      },
      {
        "number": "2",
        "name": "dv/dt",
        "type": "passive",
        "description": "Controls the output voltage slew rate at turn-on with an internal capacitor giving about a 2 ms ramp; an external capacitor can lengthen the ramp, and the pin is left open if no extra delay is needed."
      },
      {
        "number": "3",
        "name": "En/Flt",
        "type": "bidirectional",
        "description": "Tri-state bidirectional enable/fault pin that is pulled to ground by an open-drain or open-collector device to shut down the eFuse, reads about 1.4 V in thermal shutdown and about 3 V in normal operation, and must not be actively driven or loaded with a capacitor."
      },
      {
        "number": "4",
        "name": "ILIM",
        "type": "passive",
        "description": "A resistor between this pin and the source pin sets the overload and short-circuit current limit levels."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection for the NIS5420MT4 (this pin is ISENSE only on the MT1, MT2, MT6, MT7 and MT8 variants)."
      },
      {
        "number": "6",
        "name": "Src",
        "type": "power_out",
        "description": "Source of the internal power FET and output terminal of the fuse."
      },
      {
        "number": "7",
        "name": "Src",
        "type": "power_out",
        "description": "Source of the internal power FET and output terminal of the fuse."
      },
      {
        "number": "8",
        "name": "Src",
        "type": "power_out",
        "description": "Source of the internal power FET and output terminal of the fuse."
      },
      {
        "number": "9",
        "name": "Src",
        "type": "power_out",
        "description": "Source of the internal power FET and output terminal of the fuse."
      },
      {
        "number": "10",
        "name": "Src",
        "type": "power_out",
        "description": "Source of the internal power FET and output terminal of the fuse."
      },
      {
        "number": "11",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive input voltage to the device on the belly pad, rated -0.6 to 18 V steady-state and -0.6 to 25 V for 100 ms transients."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 5 is NC for NIS5420MT4 per the pin description table; the package drawing pin-connection figure ; The belly pad (pin 11) is VCC and is not shown as a numbered terminal on the 10-pin mechanical drawi"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0755,
        "at": "2026-11-10T00:31:03"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/nis5420mt4tx-d.pdf",
        "pages": 13,
        "sha256": "c34c52ca832c3473",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nis5420mt4txg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          3.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd7024e9ebf7e014bcc2b0f5799afe9c7fad6ebb765bb2188c06960bd42fb1d9",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}