NIS5132MN1TXG

{
  "slug": "nis5132mn1txg",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Resettable Fuses, DFN-10(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "tvs-fuse-board level protection",
    "nis5132mn1txg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nis5132mn1txg.kicad_sym",
    "nis5132mn1txg.kicad_mod",
    "nis5132mn1txg.glb",
    "nis5132mn1txg.step",
    "nis5132mn1txg.lbr",
    "docs/hero.png",
    "docs/nis5132mn1txg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "nis5132mn1txg-hero.glb",
    "nis5132mn1txg-hero.overlay.json",
    "nis5132mn1txg-etched.glb"
  ],
  "component": {
    "mpn": "NIS5132MN1TXG",
    "manufacturer": "onsemi",
    "package": "DFN-10(3x3)",
    "pin_count": 11,
    "category": "TVS/Fuse/Board Level Protection",
    "subcategory": "Resettable Fuses",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/nis5132mn1tx-d.pdf",
    "parts": {
      "symbol": "nis5132mn1txg.kicad_sym",
      "footprint": "nis5132mn1txg.kicad_mod",
      "model_3d": "nis5132mn1txg-hero.glb",
      "model_3d_plain": "nis5132mn1txg-etched.glb",
      "model_3d_step": "nis5132mn1txg-etched.step",
      "model_3d_step_plain": "nis5132mn1txg.step",
      "lbr": "nis5132mn1txg.lbr"
    },
    "distributor_links": {
      "lcsc": "C260429",
      "digikey": "NIS5132MN1TXGOSTR-ND",
      "mouser": "863-NIS5132MN1TXG"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:30:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NIS5132MN1TXGOSTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NIS5132MN1TXG",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Negative input voltage to the device, used as the internal reference for the IC."
      },
      {
        "number": "2",
        "name": "dv/dt",
        "type": "input",
        "description": "The internal dv/dt circuit controls the output slew rate at turn on, ramping over approximately 2 ms, and an external capacitor on this pin can increase the ramp time; leave it open if no extra delay is needed."
      },
      {
        "number": "3",
        "name": "Enable/Fault",
        "type": "bidirectional",
        "description": "Tri-state bidirectional pin that disables the output when pulled to ground through an open-drain or open-collector device, and goes to an intermediate state to signal a thermal shutdown."
      },
      {
        "number": "4",
        "name": "ILIMIT",
        "type": "passive",
        "description": "A resistor between this pin and the source pin sets the overload and short-circuit current limit levels."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected."
      },
      {
        "number": "6",
        "name": "SOURCE",
        "type": "power_out",
        "description": "Source of the internal power FET and the output terminal of the fuse."
      },
      {
        "number": "7",
        "name": "SOURCE",
        "type": "power_out",
        "description": "Source of the internal power FET and the output terminal of the fuse."
      },
      {
        "number": "8",
        "name": "SOURCE",
        "type": "power_out",
        "description": "Source of the internal power FET and the output terminal of the fuse."
      },
      {
        "number": "9",
        "name": "SOURCE",
        "type": "power_out",
        "description": "Source of the internal power FET and the output terminal of the fuse."
      },
      {
        "number": "10",
        "name": "SOURCE",
        "type": "power_out",
        "description": "Source of the internal power FET and the output terminal of the fuse."
      },
      {
        "number": "11",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive input voltage to the device; this is the belly pad (flag)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 11 is printed as '(flag)' on page 1 and '(belly pad)' on page 2. It is listed here as pin 11 VCC"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0182,
        "at": "2026-10-28T16:29:56"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/nis5132mn1tx-d.pdf",
        "pages": 12,
        "sha256": "1131a7f3ab924db6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nis5132mn1txg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "nis5132mn1txg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6360bcb3f1f4477d0217cd49ff708e18c3eab1f7ee73a28a385064c23bd74932",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}