main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers nhs3152-a1z: viewers rendered from the public page · Ray
nhs3152-a1z-etched.glb Publish 0.1.0 · Ray
nhs3152-a1z-etched.step nhs3152-a1z: factory component page (tier=mfr) · Ray
nhs3152-a1z-hero.glb nhs3152-a1z: hero GLB from the etched model (keeps the MPN mark) · Ray
nhs3152-a1z-hero.overlay.json Publish 0.1.0 · Ray
nhs3152-a1z.glb Publish 0.1.0 · Ray
nhs3152-a1z.kicad_mod Publish 0.1.0 · Ray
nhs3152-a1z.kicad_sym Publish 0.1.0 · Ray
nhs3152-a1z.lbr Publish 0.1.0 · Ray
nhs3152-a1z.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 25 pins · Ray

NHS3152

NXP Semicon · RF Chips · HVQFN-24-EP(4x4)

NHS3152 from NXP Semicon, in a HVQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PIO0_0/WAKEUP bidirectional GPIO port 0 bit 0 that doubles as the deep power-down wake-up input, which must be pulled HIGH before entering deep power-down and LOW for at least 100 µs to exit.
2 PIO0_1/CLKOUT bidirectional GPIO port 0 bit 1 with clock output function.
3 PIO0_2/SSEL bidirectional GPIO port 0 bit 2 with SPI/SSP serial select line function.
4 PIO0_6/SCLK bidirectional GPIO port 0 bit 6 with SPI/SSP serial clock line function.
5 PIO0_8/MISO bidirectional GPIO port 0 bit 8 with SPI/SSP master-in slave-out line function.
6 PIO0_9/MOSI bidirectional GPIO port 0 bit 9 with SPI/SSP master-out slave-in line function.
7 VDDBAT power_in Positive supply voltage, 1.72 V to 3.6 V.
8 VSS power_in Ground.
9 RESETN input External reset input; a LOW resets the device, with a weak pull-up to VBAT or internal NFC voltage (whichever is highest), and a rising edge also triggers the battery power switch.
10 (reserved) unconnected Reserved pad; the datasheet gives no function for it.
11 PIO0_4/SCL bidirectional GPIO port 0 bit 4 with I2C-bus SCL clock line function; open drain, no pull-up or pull-down.
12 PIO0_5/SDA bidirectional GPIO port 0 bit 5 with I2C-bus SDA data line function; open drain, no pull-up or pull-down.
13 PIO0_7/CT16B_M1 bidirectional High-source GPIO port 0 bit 7 (up to 20 mA) with 16-bit timer match output 1.
14 PIO0_3/CT16B_M0 bidirectional High-source GPIO port 0 bit 3 (up to 20 mA) with 16-bit timer match output 0.
15 PIO0_10/CT32B_M0/SWCLK bidirectional High-source GPIO port 0 bit 10 (up to 20 mA) with 32-bit timer match output 0 and Arm SWD clock.
16 PIO0_11/CT32B_M1/SWDIO bidirectional High-source GPIO port 0 bit 11 (up to 20 mA) with 32-bit timer match output 1 and Arm SWD I/O.
17 AN0_5 bidirectional Analog I/O connected to analog bus AN0_BUS5.
18 AN0_4 bidirectional Analog I/O connected to analog bus AN0_BUS4.
19 LB passive NFC antenna/coil terminal B, tolerating up to 5.5 V.
20 LA passive NFC antenna/coil terminal A, tolerating up to 5.5 V.
21 AN0_3 bidirectional Analog I/O connected to analog bus AN0_BUS3.
22 AN0_2 bidirectional Analog I/O connected to analog bus AN0_BUS2.
23 AN0_1 bidirectional Analog I/O connected to analog bus AN0_BUS1.
24 AN0_0 bidirectional Analog I/O connected to analog bus AN0_BUS0.
25 VSS power_in Exposed die pad, labelled VSS (ground) in the pin configuration figure.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package HVQFN-24-EP(4x4)
Category RF & Radio
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD VDD -0.5 3.6 V 34
Input voltage, normal PIO pads VI -0.5 3.6 V VDD = 0.6 V (as printed) 34
Input voltage, high-source PIO pads VI -0.5 5.5 V 34
Input voltage, LA/LB pads VI -0.5 5.5 V 34
Supply current per supply pin IDD 100 mA 34
Ground supply current per supply pin ISS 100 mA 34
Latch-up current Ilu 100 mA I/O; -0.5VDD < VI < +1.5VDD; Tj < 125 °C 34
Storage temperature Tstg -40 125 °C 34
Junction temperature Tj 125 °C 34
Total power dissipation Ptot 1 W 34
ESD voltage, human body model VESD -2000 2000 V human body model; all pins 34
ESD voltage, charged device model VESD -500 500 V charged device model; all pins 34
Supply voltage VDD VDD 1.72 3 3.6 V Tamb = −40 °C to +85 °C 35
Off-state leakage current IL(off) 50 nA Tamb = −40 °C to +85 °C 35
Hysteresis voltage, standard GPIO pins Vhys 0.4 V Tamb = −40 °C to +85 °C 35
IS source current, high-drive GPIO, HIGH-level IS 4 6 mA VDD = 1.8 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 35
IS source current, high-drive GPIO, HIGH-level IS 13 18 mA VDD = 3.6 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 35
IS source current, high-drive GPIO, LOW-level IS 5.5 8 mA VDD = 1.8 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 35
IS source current, high-drive GPIO, LOW-level IS 22 32 mA VDD = 3.6 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 35
IS source current, I2C-bus pins, LOW-level IS 2 8.5 mA VDD = 1.8 V; I2C-bus pins PIO0_4, PIO0_5 35
IS source current, I2C-bus pins, LOW-level IS 9.5 38 mA VDD = 3.6 V; I2C-bus pins PIO0_4, PIO0_5 35
External capacitance on RESETN Cext 1 nF Tamb = −40 °C to +85 °C 35
Power-down mode supply current, temperature sensor ICC(pd) 1 nA TSEN disabled 36
Standby current, temperature sensor Istb 6 7 µA TSEN enabled 36
Operating supply current, temperature sensor ICC(oper) 10 12 µA TSEN converting 36
Temperature accuracy Tacc -0.3 0.3 °C Tamb = 0 °C to +45 °C 36
Temperature accuracy Tacc -0.5 0.5 °C Tamb = −40 °C to +85 °C 36
Power-down mode supply current, I2D IDD(pd) 1 nA I2D disabled 37
Standby current, I2D Istb 6 7 µA I2D enabled 37
ADC analog input voltage VIA 0.108 1.744 V Range = 1.6 V 37
ADC gain error EG 100 LSB Range = 1.6 V; max deviation from straight line between Vin,min and Vin,max 37
ADC input capacitance Cin 12 pF 37
ADC input resistance Ri 4 MΩ 37
ADC analog input voltage VIA 0.06 0.969 V Range = 1.0 V 37
ADC gain error EG 30 LSB Range = 1.0 V; max deviation from straight line between Vin,min and Vin,max 37
DAC source current Isource 1 mA 38
DAC load capacitance CL 250 pF 38
DAC load resistance RL 1 kΩ 38
DAC analog output voltage Voa 0.275 1.59 V Rload = 47 kΩ 38
DAC integral non-linearity INL 6.5 30 LSB 38
Data retention time tret(data) 10 year Tamb = 22 °C 38
Rise time, pin configured as output tr 3 5 ns pin configured as output 39
Fall time, pin configured as output tf 2.5 5 ns pin configured as output 39
SCL clock frequency fSCL 0 100 kHz Standard mode 39
SCL clock frequency fSCL 0 400 kHz Fast mode 39
Fall time of SDA and SCL tf 300 ns Standard mode; footnotes [2][3][4] 39
LOW period of the SCL clock tLOW 4.7 µs Standard mode 39
LOW period of the SCL clock tLOW 1.3 µs Fast mode 39
HIGH period of the SCL clock tHIGH 4 µs Standard mode 39
HIGH period of the SCL clock tHIGH 0.6 µs Fast mode 39
Data setup time tSU;DAT 250 ns Standard mode 39
Data setup time tSU;DAT 100 ns Fast mode 39
SPI master clock cycle time tcy(clk) 50 ns full-duplex mode [1] 40
SPI master clock cycle time tcy(clk) 40 ns when only transmitting [1] 40
SPI master data setup time tSU;DAT 15 ns 2.4 V ≤ VDD < 3.6 V [2] 40
SPI master data setup time tSU;DAT 20 ns 2.0 V ≤ VDD < 2.4 V [2] 40
SPI master data setup time tSU;DAT 24 ns 1.8 V ≤ VDD < 2.0 V [2] 40
SPI master data output valid time tv(Q) 10 ns [2] Tamb = −40 °C to +105 °C 40
Ambient temperature range Tamb -40 85 °C unless otherwise stated (Table 21 header) 35

CAD (KiCad official)

  • Symbol: NHS3152
  • Footprint: Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm
  • 3D model: HVQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: nhs3152-a1z-etched.step / nhs3152-a1z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nhs3152-a1z.step / nhs3152-a1z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (48 pp, sha256 0c59748ada2187c2, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF