3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNHS3152
NXP Semicon · RF Chips · HVQFN-24-EP(4x4)
NHS3152 from NXP Semicon, in a HVQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_0/WAKEUP | bidirectional | GPIO port 0 bit 0 that doubles as the deep power-down wake-up input, which must be pulled HIGH before entering deep power-down and LOW for at least 100 µs to exit. |
| 2 | PIO0_1/CLKOUT | bidirectional | GPIO port 0 bit 1 with clock output function. |
| 3 | PIO0_2/SSEL | bidirectional | GPIO port 0 bit 2 with SPI/SSP serial select line function. |
| 4 | PIO0_6/SCLK | bidirectional | GPIO port 0 bit 6 with SPI/SSP serial clock line function. |
| 5 | PIO0_8/MISO | bidirectional | GPIO port 0 bit 8 with SPI/SSP master-in slave-out line function. |
| 6 | PIO0_9/MOSI | bidirectional | GPIO port 0 bit 9 with SPI/SSP master-out slave-in line function. |
| 7 | VDDBAT | power_in | Positive supply voltage, 1.72 V to 3.6 V. |
| 8 | VSS | power_in | Ground. |
| 9 | RESETN | input | External reset input; a LOW resets the device, with a weak pull-up to VBAT or internal NFC voltage (whichever is highest), and a rising edge also triggers the battery power switch. |
| 10 | (reserved) | unconnected | Reserved pad; the datasheet gives no function for it. |
| 11 | PIO0_4/SCL | bidirectional | GPIO port 0 bit 4 with I2C-bus SCL clock line function; open drain, no pull-up or pull-down. |
| 12 | PIO0_5/SDA | bidirectional | GPIO port 0 bit 5 with I2C-bus SDA data line function; open drain, no pull-up or pull-down. |
| 13 | PIO0_7/CT16B_M1 | bidirectional | High-source GPIO port 0 bit 7 (up to 20 mA) with 16-bit timer match output 1. |
| 14 | PIO0_3/CT16B_M0 | bidirectional | High-source GPIO port 0 bit 3 (up to 20 mA) with 16-bit timer match output 0. |
| 15 | PIO0_10/CT32B_M0/SWCLK | bidirectional | High-source GPIO port 0 bit 10 (up to 20 mA) with 32-bit timer match output 0 and Arm SWD clock. |
| 16 | PIO0_11/CT32B_M1/SWDIO | bidirectional | High-source GPIO port 0 bit 11 (up to 20 mA) with 32-bit timer match output 1 and Arm SWD I/O. |
| 17 | AN0_5 | bidirectional | Analog I/O connected to analog bus AN0_BUS5. |
| 18 | AN0_4 | bidirectional | Analog I/O connected to analog bus AN0_BUS4. |
| 19 | LB | passive | NFC antenna/coil terminal B, tolerating up to 5.5 V. |
| 20 | LA | passive | NFC antenna/coil terminal A, tolerating up to 5.5 V. |
| 21 | AN0_3 | bidirectional | Analog I/O connected to analog bus AN0_BUS3. |
| 22 | AN0_2 | bidirectional | Analog I/O connected to analog bus AN0_BUS2. |
| 23 | AN0_1 | bidirectional | Analog I/O connected to analog bus AN0_BUS1. |
| 24 | AN0_0 | bidirectional | Analog I/O connected to analog bus AN0_BUS0. |
| 25 | VSS | power_in | Exposed die pad, labelled VSS (ground) in the pin configuration figure. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | HVQFN-24-EP(4x4) |
| Category | RF & Radio |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD | VDD | -0.5 | 3.6 | V | 34 | ||
| Input voltage, normal PIO pads | VI | -0.5 | 3.6 | V | VDD = 0.6 V (as printed) | 34 | |
| Input voltage, high-source PIO pads | VI | -0.5 | 5.5 | V | 34 | ||
| Input voltage, LA/LB pads | VI | -0.5 | 5.5 | V | 34 | ||
| Supply current per supply pin | IDD | 100 | mA | 34 | |||
| Ground supply current per supply pin | ISS | 100 | mA | 34 | |||
| Latch-up current | Ilu | 100 | mA | I/O; -0.5VDD < VI < +1.5VDD; Tj < 125 °C | 34 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 34 | ||
| Junction temperature | Tj | 125 | °C | 34 | |||
| Total power dissipation | Ptot | 1 | W | 34 | |||
| ESD voltage, human body model | VESD | -2000 | 2000 | V | human body model; all pins | 34 | |
| ESD voltage, charged device model | VESD | -500 | 500 | V | charged device model; all pins | 34 | |
| Supply voltage VDD | VDD | 1.72 | 3 | 3.6 | V | Tamb = −40 °C to +85 °C | 35 |
| Off-state leakage current | IL(off) | 50 | nA | Tamb = −40 °C to +85 °C | 35 | ||
| Hysteresis voltage, standard GPIO pins | Vhys | 0.4 | V | Tamb = −40 °C to +85 °C | 35 | ||
| IS source current, high-drive GPIO, HIGH-level | IS | 4 | 6 | mA | VDD = 1.8 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 | 35 | |
| IS source current, high-drive GPIO, HIGH-level | IS | 13 | 18 | mA | VDD = 3.6 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 | 35 | |
| IS source current, high-drive GPIO, LOW-level | IS | 5.5 | 8 | mA | VDD = 1.8 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 | 35 | |
| IS source current, high-drive GPIO, LOW-level | IS | 22 | 32 | mA | VDD = 3.6 V; high-drive pins PIO0_3, PIO0_7, PIO0_10, PIO0_11 | 35 | |
| IS source current, I2C-bus pins, LOW-level | IS | 2 | 8.5 | mA | VDD = 1.8 V; I2C-bus pins PIO0_4, PIO0_5 | 35 | |
| IS source current, I2C-bus pins, LOW-level | IS | 9.5 | 38 | mA | VDD = 3.6 V; I2C-bus pins PIO0_4, PIO0_5 | 35 | |
| External capacitance on RESETN | Cext | 1 | nF | Tamb = −40 °C to +85 °C | 35 | ||
| Power-down mode supply current, temperature sensor | ICC(pd) | 1 | nA | TSEN disabled | 36 | ||
| Standby current, temperature sensor | Istb | 6 | 7 | µA | TSEN enabled | 36 | |
| Operating supply current, temperature sensor | ICC(oper) | 10 | 12 | µA | TSEN converting | 36 | |
| Temperature accuracy | Tacc | -0.3 | 0.3 | °C | Tamb = 0 °C to +45 °C | 36 | |
| Temperature accuracy | Tacc | -0.5 | 0.5 | °C | Tamb = −40 °C to +85 °C | 36 | |
| Power-down mode supply current, I2D | IDD(pd) | 1 | nA | I2D disabled | 37 | ||
| Standby current, I2D | Istb | 6 | 7 | µA | I2D enabled | 37 | |
| ADC analog input voltage | VIA | 0.108 | 1.744 | V | Range = 1.6 V | 37 | |
| ADC gain error | EG | 100 | LSB | Range = 1.6 V; max deviation from straight line between Vin,min and Vin,max | 37 | ||
| ADC input capacitance | Cin | 12 | pF | 37 | |||
| ADC input resistance | Ri | 4 | MΩ | 37 | |||
| ADC analog input voltage | VIA | 0.06 | 0.969 | V | Range = 1.0 V | 37 | |
| ADC gain error | EG | 30 | LSB | Range = 1.0 V; max deviation from straight line between Vin,min and Vin,max | 37 | ||
| DAC source current | Isource | 1 | mA | 38 | |||
| DAC load capacitance | CL | 250 | pF | 38 | |||
| DAC load resistance | RL | 1 | kΩ | 38 | |||
| DAC analog output voltage | Voa | 0.275 | 1.59 | V | Rload = 47 kΩ | 38 | |
| DAC integral non-linearity | INL | 6.5 | 30 | LSB | 38 | ||
| Data retention time | tret(data) | 10 | year | Tamb = 22 °C | 38 | ||
| Rise time, pin configured as output | tr | 3 | 5 | ns | pin configured as output | 39 | |
| Fall time, pin configured as output | tf | 2.5 | 5 | ns | pin configured as output | 39 | |
| SCL clock frequency | fSCL | 0 | 100 | kHz | Standard mode | 39 | |
| SCL clock frequency | fSCL | 0 | 400 | kHz | Fast mode | 39 | |
| Fall time of SDA and SCL | tf | 300 | ns | Standard mode; footnotes [2][3][4] | 39 | ||
| LOW period of the SCL clock | tLOW | 4.7 | µs | Standard mode | 39 | ||
| LOW period of the SCL clock | tLOW | 1.3 | µs | Fast mode | 39 | ||
| HIGH period of the SCL clock | tHIGH | 4 | µs | Standard mode | 39 | ||
| HIGH period of the SCL clock | tHIGH | 0.6 | µs | Fast mode | 39 | ||
| Data setup time | tSU;DAT | 250 | ns | Standard mode | 39 | ||
| Data setup time | tSU;DAT | 100 | ns | Fast mode | 39 | ||
| SPI master clock cycle time | tcy(clk) | 50 | ns | full-duplex mode [1] | 40 | ||
| SPI master clock cycle time | tcy(clk) | 40 | ns | when only transmitting [1] | 40 | ||
| SPI master data setup time | tSU;DAT | 15 | ns | 2.4 V ≤ VDD < 3.6 V [2] | 40 | ||
| SPI master data setup time | tSU;DAT | 20 | ns | 2.0 V ≤ VDD < 2.4 V [2] | 40 | ||
| SPI master data setup time | tSU;DAT | 24 | ns | 1.8 V ≤ VDD < 2.0 V [2] | 40 | ||
| SPI master data output valid time | tv(Q) | 10 | ns | [2] Tamb = −40 °C to +105 °C | 40 | ||
| Ambient temperature range | Tamb | -40 | 85 | °C | unless otherwise stated (Table 21 header) | 35 |
CAD (KiCad official)
- Symbol:
NHS3152 - Footprint:
Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm - 3D model: HVQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
nhs3152-a1z-etched.step/nhs3152-a1z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nhs3152-a1z.step/nhs3152-a1z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (48 pp, sha256
0c59748ada2187c2, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).