component

NE5532

Public Made by Adom

by adom

TI dual low-noise op-amp, SOIC-8. 10 MHz GBW, 9 V/us slew, 5 nV/sqrtHz. Datasheet-verified.

componentamplifierop-ampaudiolow-noisesoic-8texas-instruments
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs ne5532: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
viewers cross-highlight symbol + footprint viewers · Ray 2mo ago
ne5532-etched.fit.json ne5532: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
ne5532-etched.glb ne5532: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray 7d ago
ne5532-etched.step ne5532: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray 7d ago
NE5532.adom-lbr.json NE5532: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
ne5532.glb Publish 0.1.0 · Ray 2mo ago
ne5532.kicad_mod Publish 0.1.0 · Ray 2mo ago
ne5532.kicad_sym Publish 0.1.0 · Ray 2mo ago
ne5532.lbr add validated EAGLE .lbr (Fusion library) · Ray 2mo ago
NE5532.lbr NE5532: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
ne5532.step add .step (Fusion 3D source) · Ray 2mo ago
package.json Publish 0.1.0 · Ray 2mo ago
page.json ne5532: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body with… · Ray 7d ago
README.md ne5532: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago

NE5532

Texas Instruments · Dual low-noise (audio) op-amp · SOIC-8

Dual low-noise, high-performance operational amplifier in a SOIC-8 package, the long-time standard for audio. It pairs ~5 nV/sqrtHz input noise with a 10 MHz gain-bandwidth and a 9 V/us slew rate, and drives low-impedance loads down to 600 ohm, so it suits mic and line preamps, active filters, and DAC output buffers. Runs from split supplies up to +/-20 V. Two independent amplifiers share the V+/V- rails.

Pinout

Pin Name Type Function
1 1OUT output Op-amp 1 output. Short-circuit protected; typical output short-circuit current 38 mA. Can swing near the supply rails driving loads ≥ 600 Ω.
2 1IN- input Op-amp 1 inverting input. Common-mode input voltage range ±13V typ at VCC=±15V; input bias current 200 nA typ.
3 1IN+ input Op-amp 1 noninverting input. Common-mode input voltage range ±13V typ; input-protection diodes clamp differential inputs above ~0.6V.
4 VCC- power_in Negative supply rail. Recommended operating range -5V to -15V (absolute max -18V). Total ICC per device is 6 mA typ (16 mA max).
5 2IN+ input Op-amp 2 noninverting input. Common-mode input voltage range ±13V typ; input-protection diodes clamp differential inputs above ~0.6V.
6 2IN- input Op-amp 2 inverting input. Common-mode input voltage range ±13V typ at VCC=±15V; input bias current 200 nA typ.
7 2OUT output Op-amp 2 output. Short-circuit protected; typical output short-circuit current 38 mA. Can swing near the supply rails driving loads ≥ 600 Ω.
8 VCC+ power_in Positive supply rail. Recommended operating range +5V to +15V (absolute max +18V). Bypass to VCC- with a local ceramic capacitor for low-noise operation.

Key specifications

Parameter Value
Type Dual low-noise op-amp (audio)
Input noise ~5 nV/√Hz
Gain-bandwidth 10 MHz
Slew rate 9 V/µs
Supply voltage ±3 to ±20 V
Load drive down to 600 Ω
Channels 2 independent
Package SOIC-8
Body (L×W×H) 4.9 × 3.9 × 1.75 mm

Ordering variants

Same part, different packaging or reel option.

  • NE5532D (SOIC-8, tube)
  • NE5532DR (SOIC-8, tape & reel)

CAD (KiCad official)

  • Symbol: Amplifier_Operational:NE5532
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D)
  • 3D model files: ne5532-etched.step / ne5532-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ne5532.step / ne5532.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 d9ab074bb64a1a03, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF