component
NE5532
Public Made by Adomby adom
TI dual low-noise op-amp, SOIC-8. 10 MHz GBW, 9 V/us slew, 5 nV/sqrtHz. Datasheet-verified.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownNE5532
Texas Instruments · Dual low-noise (audio) op-amp · SOIC-8
Dual low-noise, high-performance operational amplifier in a SOIC-8 package, the long-time standard for audio. It pairs ~5 nV/sqrtHz input noise with a 10 MHz gain-bandwidth and a 9 V/us slew rate, and drives low-impedance loads down to 600 ohm, so it suits mic and line preamps, active filters, and DAC output buffers. Runs from split supplies up to +/-20 V. Two independent amplifiers share the V+/V- rails.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Op-amp 1 output. Short-circuit protected; typical output short-circuit current 38 mA. Can swing near the supply rails driving loads ≥ 600 Ω. |
| 2 | 1IN- | input | Op-amp 1 inverting input. Common-mode input voltage range ±13V typ at VCC=±15V; input bias current 200 nA typ. |
| 3 | 1IN+ | input | Op-amp 1 noninverting input. Common-mode input voltage range ±13V typ; input-protection diodes clamp differential inputs above ~0.6V. |
| 4 | VCC- | power_in | Negative supply rail. Recommended operating range -5V to -15V (absolute max -18V). Total ICC per device is 6 mA typ (16 mA max). |
| 5 | 2IN+ | input | Op-amp 2 noninverting input. Common-mode input voltage range ±13V typ; input-protection diodes clamp differential inputs above ~0.6V. |
| 6 | 2IN- | input | Op-amp 2 inverting input. Common-mode input voltage range ±13V typ at VCC=±15V; input bias current 200 nA typ. |
| 7 | 2OUT | output | Op-amp 2 output. Short-circuit protected; typical output short-circuit current 38 mA. Can swing near the supply rails driving loads ≥ 600 Ω. |
| 8 | VCC+ | power_in | Positive supply rail. Recommended operating range +5V to +15V (absolute max +18V). Bypass to VCC- with a local ceramic capacitor for low-noise operation. |
Key specifications
| Parameter | Value |
|---|---|
| Type | Dual low-noise op-amp (audio) |
| Input noise | ~5 nV/√Hz |
| Gain-bandwidth | 10 MHz |
| Slew rate | 9 V/µs |
| Supply voltage | ±3 to ±20 V |
| Load drive | down to 600 Ω |
| Channels | 2 independent |
| Package | SOIC-8 |
| Body (L×W×H) | 4.9 × 3.9 × 1.75 mm |
Ordering variants
Same part, different packaging or reel option.
NE5532D (SOIC-8, tube)NE5532DR (SOIC-8, tape & reel)
CAD (KiCad official)
- Symbol:
Amplifier_Operational:NE5532 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
d9ab074bb64a1a03, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).