main
Ray
Publish 0.1.0
0e322c2
NCV8537MNADJR2G
onsemi · Linear Voltage Regulators (LDO) · DFN-10(3x3)
NCV8537MNADJR2G from onsemi, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vout | power_out | Regulated output voltage; bypass to ground with Cout of 1.0 µF. |
| 2 | Vout | power_out | Regulated output voltage; bypass to ground with Cout of 1.0 µF. |
| 3 | SENSE/ADJ | input | On fixed-output versions it senses the output voltage and connects to Pins 1 and 2; on the adjustable version it is the ADJ pin of the resistor divider, which allows output set from 1.25 V to 10 V. |
| 4 | GND | power_in | Power supply ground. |
| 5 | PWRG | output | Power Good output that goes logic low when the output drops below the nominal output voltage, needs an external pullup to Vin (about 100 kΩ recommended), and does not function during thermal shutdown or when disabled. |
| 6 | NC | unconnected | Not connected. |
| 7 | NR | passive | Optional noise reduction pin; a 10 nF capacitor to ground greatly reduces output noise, or it can be left unconnected. |
| 8 | SD | input | Shutdown pin; the ON threshold is 2.0 V and the OFF threshold is 0.4 V, and when not in use it should be connected to the input pin. |
| 9 | Vin | power_in | Power supply input; supply range 2.9 V to 12 V with an absolute maximum rating of +16 V. |
| 10 | Vin | power_in | Power supply input; supply range 2.9 V to 12 V with an absolute maximum rating of +16 V. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DFN-10(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage (Accuracy), TA = 25°C | Vref | 1.239 | 1.25 | 1.261 | V | Vin = 2.9 V to Vout +4.0 V, Iload = 0.1 mA to 500 mA, TA = 25°C | 9 |
| Reference Voltage (Accuracy), TA = 0°C to +85°C | Vref | 1.233 | 1.25 | 1.268 | V | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = 0°C to +85°C | 9 |
| Reference Voltage (Accuracy), TA = −40°C to +125°C | Vref | 1.231 | 1.25 | 1.269 | V | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = −40°C to +125°C | 9 |
| Reference Voltage tolerance, TA = 25°C | Vref | -0.9 | 0.9 | % | Vin = 2.9 V to Vout +4.0 V, Iload = 0.1 mA to 500 mA, TA = 25°C | 9 | |
| Reference Voltage tolerance, TA = 0°C to +85°C | Vref | -1.4 | 1.4 | % | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = 0°C to +85°C | 9 | |
| Reference Voltage tolerance, TA = −40°C to +125°C | Vref | -1.5 | 1.5 | % | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = −40°C to +125°C | 9 | |
| Peak Output Current | Ipk | 500 | 700 | 830 | mA | See Figure 14 | 9 |
| Input Voltage | Vin | -0.3 | 16 | V | 4 | ||
| Output Voltage | Vout | -0.3 | 10 | V | Upper limit is Vin +0.3 V or 10 V, whichever is less | 4 | |
| PWRG Pin Voltage | VPWRG | -0.3 | 16 | V | 4 | ||
| Shutdown Pin Voltage | Vsh | -0.3 | 16 | V | 4 | ||
| Junction Temperature Range | TJ | -40 | 150 | °C | 4 | ||
| Storage Temperature Range | Tstg | -50 | 150 | °C | 4 | ||
| Junction-to-Air thermal resistance | JA | 215 | °C/W | Min Pad Board (Note 1) | 4 | ||
| Junction-to-Air thermal resistance | JA | 66 | °C/W | 1 Pad Board (Note 1) | 4 | ||
| Junction-to-Pin thermal resistance | J-L4 | 58 | °C/W | Min Pad Board (Note 1) | 4 | ||
| Junction-to-Pin thermal resistance | J-L4 | 18 | °C/W | 1 Pad Board (Note 1) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Junction−to−Pin, J−L4 58 18 °C/W 1. As mounted on a 35 x 35 x 1.5 mm FR4 Substrate, with a single layer of a specified copper area of 2 oz (0.07 mm thick) copper traces and | 4 |
CAD (KiCad official)
- Symbol:
NCV8537MNADJR2G - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files:
ncv8537mnadjr2g-etched.step/ncv8537mnadjr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv8537mnadjr2g.step/ncv8537mnadjr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (18 pp, sha256
811fc39a03b9d45e, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCV8537MNADJR2G
**onsemi** · Linear Voltage Regulators (LDO) · DFN-10(3x3)
NCV8537MNADJR2G from onsemi, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vout | power_out | Regulated output voltage; bypass to ground with Cout of 1.0 µF. |
| 2 | Vout | power_out | Regulated output voltage; bypass to ground with Cout of 1.0 µF. |
| 3 | SENSE/ADJ | input | On fixed-output versions it senses the output voltage and connects to Pins 1 and 2; on the adjustable version it is the ADJ pin of the resistor divider, which allows output set from 1.25 V to 10 V. |
| 4 | GND | power_in | Power supply ground. |
| 5 | PWRG | output | Power Good output that goes logic low when the output drops below the nominal output voltage, needs an external pullup to Vin (about 100 kΩ recommended), and does not function during thermal shutdown or when disabled. |
| 6 | NC | unconnected | Not connected. |
| 7 | NR | passive | Optional noise reduction pin; a 10 nF capacitor to ground greatly reduces output noise, or it can be left unconnected. |
| 8 | SD | input | Shutdown pin; the ON threshold is 2.0 V and the OFF threshold is 0.4 V, and when not in use it should be connected to the input pin. |
| 9 | Vin | power_in | Power supply input; supply range 2.9 V to 12 V with an absolute maximum rating of +16 V. |
| 10 | Vin | power_in | Power supply input; supply range 2.9 V to 12 V with an absolute maximum rating of +16 V. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DFN-10(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage (Accuracy), TA = 25°C | Vref | 1.239 | 1.25 | 1.261 | V | Vin = 2.9 V to Vout +4.0 V, Iload = 0.1 mA to 500 mA, TA = 25°C | 9 |
| Reference Voltage (Accuracy), TA = 0°C to +85°C | Vref | 1.233 | 1.25 | 1.268 | V | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = 0°C to +85°C | 9 |
| Reference Voltage (Accuracy), TA = −40°C to +125°C | Vref | 1.231 | 1.25 | 1.269 | V | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = −40°C to +125°C | 9 |
| Reference Voltage tolerance, TA = 25°C | Vref | -0.9 | | 0.9 | % | Vin = 2.9 V to Vout +4.0 V, Iload = 0.1 mA to 500 mA, TA = 25°C | 9 |
| Reference Voltage tolerance, TA = 0°C to +85°C | Vref | -1.4 | | 1.4 | % | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = 0°C to +85°C | 9 |
| Reference Voltage tolerance, TA = −40°C to +125°C | Vref | -1.5 | | 1.5 | % | Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = −40°C to +125°C | 9 |
| Peak Output Current | Ipk | 500 | 700 | 830 | mA | See Figure 14 | 9 |
| Input Voltage | Vin | -0.3 | | 16 | V | | 4 |
| Output Voltage | Vout | -0.3 | | 10 | V | Upper limit is Vin +0.3 V or 10 V, whichever is less | 4 |
| PWRG Pin Voltage | VPWRG | -0.3 | | 16 | V | | 4 |
| Shutdown Pin Voltage | Vsh | -0.3 | | 16 | V | | 4 |
| Junction Temperature Range | TJ | -40 | | 150 | °C | | 4 |
| Storage Temperature Range | Tstg | -50 | | 150 | °C | | 4 |
| Junction-to-Air thermal resistance | JA | | 215 | | °C/W | Min Pad Board (Note 1) | 4 |
| Junction-to-Air thermal resistance | JA | | 66 | | °C/W | 1 Pad Board (Note 1) | 4 |
| Junction-to-Pin thermal resistance | J-L4 | | 58 | | °C/W | Min Pad Board (Note 1) | 4 |
| Junction-to-Pin thermal resistance | J-L4 | | 18 | | °C/W | 1 Pad Board (Note 1) | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | Junction−to−Pin, J−L4 58 18 °C/W 1. As mounted on a 35 x 35 x 1.5 mm FR4 Substrate, with a single layer of a specified copper area of 2 oz (0.07 mm thick) copper traces and | 4 |
## CAD (KiCad official)
- Symbol: `NCV8537MNADJR2G`
- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`
- 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
- 3D model files: `ncv8537mnadjr2g-etched.step` / `ncv8537mnadjr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncv8537mnadjr2g.step` / `ncv8537mnadjr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv8537mnadjr2-d.pdf) (18 pp, sha256 `811fc39a03b9d45e`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncv8537mnadjr2g-datasheet.pdf)