main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncv8537mnadjr2g: viewers · Ray
ncv8537mnadjr2g-etched.glb Publish 0.1.0 · Ray
ncv8537mnadjr2g-etched.step ncv8537mnadjr2g: factory component page (tier=mfr) · Ray
ncv8537mnadjr2g-hero.glb ncv8537mnadjr2g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncv8537mnadjr2g-hero.overlay.json Publish 0.1.0 · Ray
ncv8537mnadjr2g.glb Publish 0.1.0 · Ray
ncv8537mnadjr2g.kicad_mod Publish 0.1.0 · Ray
ncv8537mnadjr2g.kicad_sym Publish 0.1.0 · Ray
ncv8537mnadjr2g.lbr Publish 0.1.0 · Ray
ncv8537mnadjr2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

NCV8537MNADJR2G

onsemi · Linear Voltage Regulators (LDO) · DFN-10(3x3)

NCV8537MNADJR2G from onsemi, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vout power_out Regulated output voltage; bypass to ground with Cout of 1.0 µF.
2 Vout power_out Regulated output voltage; bypass to ground with Cout of 1.0 µF.
3 SENSE/ADJ input On fixed-output versions it senses the output voltage and connects to Pins 1 and 2; on the adjustable version it is the ADJ pin of the resistor divider, which allows output set from 1.25 V to 10 V.
4 GND power_in Power supply ground.
5 PWRG output Power Good output that goes logic low when the output drops below the nominal output voltage, needs an external pullup to Vin (about 100 kΩ recommended), and does not function during thermal shutdown or when disabled.
6 NC unconnected Not connected.
7 NR passive Optional noise reduction pin; a 10 nF capacitor to ground greatly reduces output noise, or it can be left unconnected.
8 SD input Shutdown pin; the ON threshold is 2.0 V and the OFF threshold is 0.4 V, and when not in use it should be connected to the input pin.
9 Vin power_in Power supply input; supply range 2.9 V to 12 V with an absolute maximum rating of +16 V.
10 Vin power_in Power supply input; supply range 2.9 V to 12 V with an absolute maximum rating of +16 V.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package DFN-10(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference Voltage (Accuracy), TA = 25°C Vref 1.239 1.25 1.261 V Vin = 2.9 V to Vout +4.0 V, Iload = 0.1 mA to 500 mA, TA = 25°C 9
Reference Voltage (Accuracy), TA = 0°C to +85°C Vref 1.233 1.25 1.268 V Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = 0°C to +85°C 9
Reference Voltage (Accuracy), TA = −40°C to +125°C Vref 1.231 1.25 1.269 V Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = −40°C to +125°C 9
Reference Voltage tolerance, TA = 25°C Vref -0.9 0.9 % Vin = 2.9 V to Vout +4.0 V, Iload = 0.1 mA to 500 mA, TA = 25°C 9
Reference Voltage tolerance, TA = 0°C to +85°C Vref -1.4 1.4 % Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = 0°C to +85°C 9
Reference Voltage tolerance, TA = −40°C to +125°C Vref -1.5 1.5 % Vin = 2.9 V to Vout + 4.0 V, Iload = 0.1 mA to 500 mA, TA = −40°C to +125°C 9
Peak Output Current Ipk 500 700 830 mA See Figure 14 9
Input Voltage Vin -0.3 16 V 4
Output Voltage Vout -0.3 10 V Upper limit is Vin +0.3 V or 10 V, whichever is less 4
PWRG Pin Voltage VPWRG -0.3 16 V 4
Shutdown Pin Voltage Vsh -0.3 16 V 4
Junction Temperature Range TJ -40 150 °C 4
Storage Temperature Range Tstg -50 150 °C 4
Junction-to-Air thermal resistance JA 215 °C/W Min Pad Board (Note 1) 4
Junction-to-Air thermal resistance JA 66 °C/W 1 Pad Board (Note 1) 4
Junction-to-Pin thermal resistance J-L4 58 °C/W Min Pad Board (Note 1) 4
Junction-to-Pin thermal resistance J-L4 18 °C/W 1 Pad Board (Note 1) 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper Junction−to−Pin, J−L4 58 18 °C/W 1. As mounted on a 35 x 35 x 1.5 mm FR4 Substrate, with a single layer of a specified copper area of 2 oz (0.07 mm thick) copper traces and 4

CAD (KiCad official)

  • Symbol: NCV8537MNADJR2G
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
  • 3D model files: ncv8537mnadjr2g-etched.step / ncv8537mnadjr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv8537mnadjr2g.step / ncv8537mnadjr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (18 pp, sha256 811fc39a03b9d45e, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF