main
Ray
Publish 0.1.0
8de5da6
NCV68261MTWAITBG
onsemi · Gate Drivers · WDFNW-6(2x2)
NCV68261MTWAITBG from onsemi, in a WDFNW-6(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | passive | Reference for the charge pump output; connect to the Source of the external NMOS. |
| 2 | G | output | Charge pump output with discharge function; connect to the Gate of the external NMOS. |
| 3 | D | input | Cathode of the diode and inverting input of the internal comparator; bypass directly to GND with a ceramic capacitor. |
| 4 | EN | input | Enable input where a high level enables the chip; connect to IN if enable function is not required. |
| 5 | GND | power_in | Ground potential. |
| 6 | IN | power_in | Supply voltage input, anode of the diode and non-inverting input of the internal comparator; bypass directly to GND with a ceramic capacitor. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | WDFNW-6(2x2) |
| Category | Motor Driver ICs |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input and Source Voltage DC | VS | -18 | 45 | V | 3 | ||
| Input, Source, Drain, Gate and Enable Voltage Load Dump Suppressed | Us* | 60 | V | Load Dump Suppressed | 3 | ||
| Input, Source, Gate and Enable Voltage Test Pulse 1 | Us | -40 | V | Test Pulse 1 | 3 | ||
| Gate Voltage | VG | -18 | 45 | V | 3 | ||
| Gate-to-Source Voltage | VGS | -0.3 | 19 | V | 3 | ||
| Drain Voltage | VD | -5 | 45 | V | 3 | ||
| Input and Source-to-Drain Voltage DC | VSD | -45 | 45 | V | 3 | ||
| Input and Source-to-Drain Voltage transient | VSD | -60 | V | Test Pulse 1 | 3 | ||
| Enable Voltage | VEN | -18 | 45 | V | 3 | ||
| Operating Junction Temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature | TSTG | -55 | 150 | °C | 3 | ||
| ESD Capability, Human Body Model | ESDHBM | -2 | 2 | kV | Human Body Model | 3 | |
| ESD Capability, Charged Device Model | ESDCDM | -1 | 1 | kV | Charged Device Model | 3 | |
| Input Voltage | VIN | 3 | 32 | V | 3 | ||
| Junction Temperature | TJ | -40 | 150 | °C | 3 | ||
| Undervoltage Lockout rising | VIN_UVLO | 3.4 | 3.65 | V | VIN rising | 4 | |
| Undervoltage Lockout falling | VIN_UVLO | 3 | 3.25 | V | VIN falling (Gate Discharge) | 4 | |
| Overvoltage Lockout rising | VIN_OVLO | 32 | 35.6 | 42 | V | VIN rising | 4 |
| Overvoltage Lockout Hysteresis | VIN_OVLO | 0.8 | V | Hysteresis (VIN falling) | 4 | ||
| Gate-to-Source Charged Voltage | VGS | 3 | 4 | V | VIN = 4 V | 4 | |
| Gate-to-Source Charged Voltage | VGS | 9 | 11.3 | 15 | V | VIN ≥ 8 V | 4 |
| Input-to-Drain Voltage Threshold Gate Charge | Vth(IN−D) | 100 | 140 | 220 | mV | VIN−D rising | 4 |
| Input-to-Drain Voltage Threshold Gate Discharge | Vth(IN−D) | -40 | -10 | 0 | mV | VIN−D falling | 4 |
| Gate Charge Current | IG_Charge | 70 | 100 | A | VGS = 0 V, VIN−D = 220 mV, VIN = 4 V | 4 | |
| Gate Charge Current | IG_Charge | 170 | 320 | A | VGS = 0 V, VIN−D = 220 mV, VIN = 13.5 V | 4 | |
| Discharge Switch RDS(ON) | RDS(on) | 1 | 2.4 | 5 | VGS = 100 mV, VIN−D ≤ −100 mV | 4 | |
| Response Time (Time from Reverse Voltage Condition to VGS = 9 V) | trt_OFF | 0.2 | 0.6 | s | VGS = 10 V, VIN = 13.5 V, VIN−D = step from 250 mV to −150 mV | 4 | |
| Disable Current | IDIS | 5 | A | VEN = 0 V | 4 | ||
| Quiescent Current | Iq | 210 | 295 | A | IGS = 0 mA, VIN−D = 220 mV (CP active) | 4 | |
| Enable Input Threshold Voltage Logic Low | Vth(EN) | 0.99 | 1.7 | V | VGS ≤ 0.1 V | 4 | |
| Enable Input Threshold Voltage Logic High | Vth(EN) | 1.8 | 2.31 | V | VGS ≥ 4.9 V | 4 | |
| Enable Input Current Logic High | IEN_ON | 11 | A | VEN = 13.5 V | 4 | ||
| Enable Input Current Logic High | IEN_ON | 3.2 | 5 | A | VEN = 5 V | 4 | |
| Enable Input Current Logic Low | IEN_OFF | 0.01 | 1 | A | VEN = 0 V | 4 | |
| Response Time (Time from EN High-to-Low to VGS = 9 V) | trt_EN_OFF | 0.9 | 4 | s | VGS = 10 V, VIN = 13.5 V, VEN = step from 5 V to 0 V | 4 | |
| Gate Discharge Peak Current | IG_Disch | 1.65 | A | VGS = 10 V, VIN−D ≤ −100 mV | 4 | ||
| Gate-to-Source Static Resistance | 1.1 | M | 4 | ||||
| Thermal Resistance, Junction-to-Ambient | RJA | 157.8 | °C/W | 3 | |||
| Thermal Reference, Junction-to-Case Top | ΨJT | 37.4 | °C/W | 3 |
CAD (Adom-generated)
- Symbol:
NCV68261MTWAITBG - Footprint:
Adom_Gen:onsemi_NCV68261_32aa39 - 3D model: generated to fit the land (STEP)
- 3D model files:
ncv68261mtwaitbg-etched.step/ncv68261mtwaitbg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv68261mtwaitbg.step/ncv68261mtwaitbg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (17 pp, sha256
c5a6509d1f607f81, retrieved 2026-11-19) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# NCV68261MTWAITBG
**onsemi** · Gate Drivers · WDFNW-6(2x2)
NCV68261MTWAITBG from onsemi, in a WDFNW-6(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | passive | Reference for the charge pump output; connect to the Source of the external NMOS. |
| 2 | G | output | Charge pump output with discharge function; connect to the Gate of the external NMOS. |
| 3 | D | input | Cathode of the diode and inverting input of the internal comparator; bypass directly to GND with a ceramic capacitor. |
| 4 | EN | input | Enable input where a high level enables the chip; connect to IN if enable function is not required. |
| 5 | GND | power_in | Ground potential. |
| 6 | IN | power_in | Supply voltage input, anode of the diode and non-inverting input of the internal comparator; bypass directly to GND with a ceramic capacitor. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | WDFNW-6(2x2) |
| Category | Motor Driver ICs |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input and Source Voltage DC | VS | -18 | | 45 | V | | 3 |
| Input, Source, Drain, Gate and Enable Voltage Load Dump Suppressed | Us* | | | 60 | V | Load Dump Suppressed | 3 |
| Input, Source, Gate and Enable Voltage Test Pulse 1 | Us | -40 | | | V | Test Pulse 1 | 3 |
| Gate Voltage | VG | -18 | | 45 | V | | 3 |
| Gate-to-Source Voltage | VGS | -0.3 | | 19 | V | | 3 |
| Drain Voltage | VD | -5 | | 45 | V | | 3 |
| Input and Source-to-Drain Voltage DC | VSD | -45 | | 45 | V | | 3 |
| Input and Source-to-Drain Voltage transient | VSD | -60 | | | V | Test Pulse 1 | 3 |
| Enable Voltage | VEN | -18 | | 45 | V | | 3 |
| Operating Junction Temperature | TJ | -40 | | 150 | °C | | 3 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 3 |
| ESD Capability, Human Body Model | ESDHBM | -2 | | 2 | kV | Human Body Model | 3 |
| ESD Capability, Charged Device Model | ESDCDM | -1 | | 1 | kV | Charged Device Model | 3 |
| Input Voltage | VIN | 3 | | 32 | V | | 3 |
| Junction Temperature | TJ | -40 | | 150 | °C | | 3 |
| Undervoltage Lockout rising | VIN_UVLO | | 3.4 | 3.65 | V | VIN rising | 4 |
| Undervoltage Lockout falling | VIN_UVLO | 3 | 3.25 | | V | VIN falling (Gate Discharge) | 4 |
| Overvoltage Lockout rising | VIN_OVLO | 32 | 35.6 | 42 | V | VIN rising | 4 |
| Overvoltage Lockout Hysteresis | VIN_OVLO | | 0.8 | | V | Hysteresis (VIN falling) | 4 |
| Gate-to-Source Charged Voltage | VGS | 3 | 4 | | V | VIN = 4 V | 4 |
| Gate-to-Source Charged Voltage | VGS | 9 | 11.3 | 15 | V | VIN ≥ 8 V | 4 |
| Input-to-Drain Voltage Threshold Gate Charge | Vth(IN−D) | 100 | 140 | 220 | mV | VIN−D rising | 4 |
| Input-to-Drain Voltage Threshold Gate Discharge | Vth(IN−D) | -40 | -10 | 0 | mV | VIN−D falling | 4 |
| Gate Charge Current | IG_Charge | 70 | 100 | | A | VGS = 0 V, VIN−D = 220 mV, VIN = 4 V | 4 |
| Gate Charge Current | IG_Charge | 170 | 320 | | A | VGS = 0 V, VIN−D = 220 mV, VIN = 13.5 V | 4 |
| Discharge Switch RDS(ON) | RDS(on) | 1 | 2.4 | 5 | | VGS = 100 mV, VIN−D ≤ −100 mV | 4 |
| Response Time (Time from Reverse Voltage Condition to VGS = 9 V) | trt_OFF | | 0.2 | 0.6 | s | VGS = 10 V, VIN = 13.5 V, VIN−D = step from 250 mV to −150 mV | 4 |
| Disable Current | IDIS | | | 5 | A | VEN = 0 V | 4 |
| Quiescent Current | Iq | | 210 | 295 | A | IGS = 0 mA, VIN−D = 220 mV (CP active) | 4 |
| Enable Input Threshold Voltage Logic Low | Vth(EN) | 0.99 | 1.7 | | V | VGS ≤ 0.1 V | 4 |
| Enable Input Threshold Voltage Logic High | Vth(EN) | | 1.8 | 2.31 | V | VGS ≥ 4.9 V | 4 |
| Enable Input Current Logic High | IEN_ON | | 11 | | A | VEN = 13.5 V | 4 |
| Enable Input Current Logic High | IEN_ON | | 3.2 | 5 | A | VEN = 5 V | 4 |
| Enable Input Current Logic Low | IEN_OFF | | 0.01 | 1 | A | VEN = 0 V | 4 |
| Response Time (Time from EN High-to-Low to VGS = 9 V) | trt_EN_OFF | | 0.9 | 4 | s | VGS = 10 V, VIN = 13.5 V, VEN = step from 5 V to 0 V | 4 |
| Gate Discharge Peak Current | IG_Disch | | 1.65 | | A | VGS = 10 V, VIN−D ≤ −100 mV | 4 |
| Gate-to-Source Static Resistance | | | 1.1 | | M | | 4 |
| Thermal Resistance, Junction-to-Ambient | RJA | | 157.8 | | °C/W | | 3 |
| Thermal Reference, Junction-to-Case Top | ΨJT | | 37.4 | | °C/W | | 3 |
## CAD (Adom-generated)
- Symbol: `NCV68261MTWAITBG`
- Footprint: `Adom_Gen:onsemi_NCV68261_32aa39`
- 3D model: generated to fit the land (STEP)
- 3D model files: `ncv68261mtwaitbg-etched.step` / `ncv68261mtwaitbg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncv68261mtwaitbg.step` / `ncv68261mtwaitbg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv68261-d.pdf) (17 pp, sha256 `c5a6509d1f607f81`, retrieved 2026-11-19)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/ncv68261mtwaitbg-datasheet.pdf)