Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCV68261MTWAITBG

onsemi · Gate Drivers · WDFNW-6(2x2)

NCV68261MTWAITBG from onsemi, in a WDFNW-6(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 S passive Reference for the charge pump output; connect to the Source of the external NMOS.
2 G output Charge pump output with discharge function; connect to the Gate of the external NMOS.
3 D input Cathode of the diode and inverting input of the internal comparator; bypass directly to GND with a ceramic capacitor.
4 EN input Enable input where a high level enables the chip; connect to IN if enable function is not required.
5 GND power_in Ground potential.
6 IN power_in Supply voltage input, anode of the diode and non-inverting input of the internal comparator; bypass directly to GND with a ceramic capacitor.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package WDFNW-6(2x2)
Category Motor Driver ICs
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input and Source Voltage DC VS -18 45 V 3
Input, Source, Drain, Gate and Enable Voltage Load Dump Suppressed Us* 60 V Load Dump Suppressed 3
Input, Source, Gate and Enable Voltage Test Pulse 1 Us -40 V Test Pulse 1 3
Gate Voltage VG -18 45 V 3
Gate-to-Source Voltage VGS -0.3 19 V 3
Drain Voltage VD -5 45 V 3
Input and Source-to-Drain Voltage DC VSD -45 45 V 3
Input and Source-to-Drain Voltage transient VSD -60 V Test Pulse 1 3
Enable Voltage VEN -18 45 V 3
Operating Junction Temperature TJ -40 150 °C 3
Storage Temperature TSTG -55 150 °C 3
ESD Capability, Human Body Model ESDHBM -2 2 kV Human Body Model 3
ESD Capability, Charged Device Model ESDCDM -1 1 kV Charged Device Model 3
Input Voltage VIN 3 32 V 3
Junction Temperature TJ -40 150 °C 3
Undervoltage Lockout rising VIN_UVLO 3.4 3.65 V VIN rising 4
Undervoltage Lockout falling VIN_UVLO 3 3.25 V VIN falling (Gate Discharge) 4
Overvoltage Lockout rising VIN_OVLO 32 35.6 42 V VIN rising 4
Overvoltage Lockout Hysteresis VIN_OVLO 0.8 V Hysteresis (VIN falling) 4
Gate-to-Source Charged Voltage VGS 3 4 V VIN = 4 V 4
Gate-to-Source Charged Voltage VGS 9 11.3 15 V VIN ≥ 8 V 4
Input-to-Drain Voltage Threshold Gate Charge Vth(IN−D) 100 140 220 mV VIN−D rising 4
Input-to-Drain Voltage Threshold Gate Discharge Vth(IN−D) -40 -10 0 mV VIN−D falling 4
Gate Charge Current IG_Charge 70 100 A VGS = 0 V, VIN−D = 220 mV, VIN = 4 V 4
Gate Charge Current IG_Charge 170 320 A VGS = 0 V, VIN−D = 220 mV, VIN = 13.5 V 4
Discharge Switch RDS(ON) RDS(on) 1 2.4 5 VGS = 100 mV, VIN−D ≤ −100 mV 4
Response Time (Time from Reverse Voltage Condition to VGS = 9 V) trt_OFF 0.2 0.6 s VGS = 10 V, VIN = 13.5 V, VIN−D = step from 250 mV to −150 mV 4
Disable Current IDIS 5 A VEN = 0 V 4
Quiescent Current Iq 210 295 A IGS = 0 mA, VIN−D = 220 mV (CP active) 4
Enable Input Threshold Voltage Logic Low Vth(EN) 0.99 1.7 V VGS ≤ 0.1 V 4
Enable Input Threshold Voltage Logic High Vth(EN) 1.8 2.31 V VGS ≥ 4.9 V 4
Enable Input Current Logic High IEN_ON 11 A VEN = 13.5 V 4
Enable Input Current Logic High IEN_ON 3.2 5 A VEN = 5 V 4
Enable Input Current Logic Low IEN_OFF 0.01 1 A VEN = 0 V 4
Response Time (Time from EN High-to-Low to VGS = 9 V) trt_EN_OFF 0.9 4 s VGS = 10 V, VIN = 13.5 V, VEN = step from 5 V to 0 V 4
Gate Discharge Peak Current IG_Disch 1.65 A VGS = 10 V, VIN−D ≤ −100 mV 4
Gate-to-Source Static Resistance 1.1 M 4
Thermal Resistance, Junction-to-Ambient RJA 157.8 °C/W 3
Thermal Reference, Junction-to-Case Top ΨJT 37.4 °C/W 3

CAD (Adom-generated)

  • Symbol: NCV68261MTWAITBG
  • Footprint: Adom_Gen:onsemi_NCV68261_32aa39
  • 3D model: generated to fit the land (STEP)
  • 3D model files: ncv68261mtwaitbg-etched.step / ncv68261mtwaitbg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv68261mtwaitbg.step / ncv68261mtwaitbg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (17 pp, sha256 c5a6509d1f607f81, retrieved 2026-11-19)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF