main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncv57090adwr2g: viewers rendered from the public page · Ray
ncv57090adwr2g-etched.glb Publish 0.1.0 · Ray
ncv57090adwr2g-etched.step ncv57090adwr2g: factory component page (tier=mfr) · Ray
ncv57090adwr2g-hero.glb ncv57090adwr2g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncv57090adwr2g-hero.overlay.json Publish 0.1.0 · Ray
ncv57090adwr2g.glb Publish 0.1.0 · Ray
ncv57090adwr2g.kicad_mod Publish 0.1.0 · Ray
ncv57090adwr2g.kicad_sym Publish 0.1.0 · Ray
ncv57090adwr2g.lbr Publish 0.1.0 · Ray
ncv57090adwr2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

NCV57090ADWR2G

onsemi · Gate Drive ICs · SOIC-8-300mil

NCV57090ADWR2G from onsemi, in a SOIC-8-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Input-side power supply that needs a good-quality bypass capacitor to GND1 placed close to the pin, and the UVLO1 circuit enables operation only when a typical supply above VUVLO1-OUT-ON (3.1 V max) is present; the operating range is UVLO1 to 20 V.
2 IN+ input Non-inverting gate driver input, internally clamped to GND1 with an internal 125 kΩ pull-down that keeps the output low without an input signal, and a minimum positive or negative pulse width is required before OUT responds.
3 IN− input Inverting gate driver input, internally clamped to VDD1 with an internal 50 kΩ pull-up that keeps the output low without an input signal, and a minimum positive or negative pulse width is required before OUT responds.
4 GND1 power_in Input-side ground reference for the driver.
5 VDD2 power_in Output-side positive power supply with an operating range from UVLO2 to 30 V max, requiring a good-quality bypass capacitor to GND2 placed close to the pin.
6 OUT output Driver output that provides the drive voltage and source/sink current to the IGBT/MOSFET gate (6.5 A peak source and sink) and is actively pulled low during start-up.
7 CLAMP output Active Miller clamp output that turns on its internal N FET when the voltage falls below VCLAMP-THR (1.5 V to 2.5 V) and must be tied directly to the IGBT/MOSFET gate with minimum trace length.
8 GND2 power_in Output-side gate drive reference, connected to the IGBT emitter or MOSFET source.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8-300mil
Category Power Management ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage, Input Side (VDD1-GND1) VDD1−GND1 -0.3 22 V Over operating free-air temperature range 6
Positive Power Supply, Output Side (VDD2-GND2) VDD2−GND2 -0.3 32 V Over operating free-air temperature range 6
Gate-driver Output Low Voltage (VOUT-GND2) VOUT−GND2 -0.3 V NCD57090A/B/D/F 6
Gate-driver Output Sourcing Current IPK−SRC 6.5 A maximum pulse width = 10 µs, maximum duty cycle = 0.2%, VDD2 = 15 V, VEE2 = 0 V 6
Gate-driver Output Sinking Current IPK−SNK 6.5 A maximum pulse width = 10 µs, maximum duty cycle = 0.2%, VDD2 = 15 V, VEE2 = 0 V 6
Clamp Sinking Current IPK−CLAMP 2.5 A maximum pulse width = 10 µs, maximum duty cycle = 0.2%, VCLAMP = 2.5 V 6
Maximum Short Circuit Clamping Time tCLP 10 µs IOUT_CLAMP = 500 mA 6
Voltage at IN+, IN− VLIM−GND1 -0.3 V 6
Clamp Voltage VCLAMP−GND2 -0.3 V 6
Power Dissipation (SOIC-8 Wide Package) PD 1470 mW 6
Maximum Junction Temperature TJ(max) -40 150 °C 7
Storage Temperature Range TSTG -65 150 °C 7
ESD Capability, Human Body Model ESDHBM -2 2 kV Human Body Model, AEC-Q100-002 7
ESD Capability, Charged Device Model ESDCDM -2 2 kV Charged Device Model, AEC-Q100-011 7
Lead Temperature Soldering Reflow, Pb-Free TSLD 260 °C 7
Supply Voltage, Input Side (max) VDD1−GND1 20 V Minimum is UVLO1 7
Positive Power Supply, Output Side (max) VDD2−GND2 30 V Minimum is UVLO2 7
Low Level Input Voltage at IN+, IN− VIL 0 V Values valid for 3.3 V and 5 V VDD1 7
Common Mode Transient Immunity /dVISO/dt/ 100 kV/µs Tested by ±1500 V pulses 7
Ambient Temperature TA -40 125 °C 7
UVLO1 Output Enabled VUVLO1−OUT−ON 3.1 V UVLO1 Output Enabled 9
UVLO1 Output Disabled VUVLO1−OUT−OFF 2.4 V UVLO1 Output Disabled 9
UVLO1 Hysteresis VUVLO1−HYST 0.1 V 9
UVLO2 Output Enabled, NCx57090y VUVLO2−OUT−ON 12.4 12.9 13.4 V UVLO2 Output Enabled, NCx57090y 9
UVLO2 Output Disabled, NCx57090y VUVLO2−OUT−OFF 11.5 12 12.5 V UVLO2 Output Disabled, NCx57090y 9
UVLO2 Hysteresis VUVLO2−HYST 0.7 1 V 9
Input Supply Quiescent Current IDD1−0−3.3 2 mA IN+ = Low, IN− = Low, VDD1 = 3.3 V 9
Input Supply Current IDD1−100−5 5.5 mA IN+ = High, IN− = Low 9
Output Positive Supply Quiescent Current IDD2−0 2 mA IN+ = Low, IN− = Low, no load 9
Output Positive Supply Current IDD2−100 2 mA IN+ = High, IN− = Low, no load 9
IN− Input Current IIN−L−3.3 100 µA VIN− = 0 V, VDD1 = 3.3 V 9
IN+ Input Current IIN+H−3.3 100 µA VIN+ = VDD1 = 3.3 V 9
Input Pulse Width for Guaranteed No Response at Output tON−MIN1 10 ns Input Pulse Width of IN+, IN− for Guaranteed No Response at Output 9
Input Pulse Width for Guaranteed Response at Output tON−MIN2 40 ns Input Pulse Width of IN+, IN− for Guaranteed Response at Output 9
Output Low State (VOUT-GND2, NCD57090A/D/F) VOUTL1 0.15 0.3 V ISINK = 200 mA 10
Output Low State (VOUT-GND2, NCD57090A/D/F) VOUTL2 0.8 V ISINK = 1.0 A, TA = 25°C 10
Output High State (VDD2-VOUT, NCD57090A/B/D/F) VOUTH1 0.2 0.35 V ISRC = 200 mA 10
Output High State (VDD2-VOUT, NCD57090A/B/D/F) VOUTH2 1 V ISRC = 1.0 A, TA = 25°C 10
Clamp Voltage VCLAMP 3.5 V ICLAMP = 2.5 A, TA = −40°C to 125°C 10
Clamp Activation Threshold VCLAMP−THR 1.5 2 2.5 V 10
Clamping Voltage, Sourcing (VOUT / VOUTH-VDD2) VCLAMP−OUTH 0.7 0.9 V IN+ = Low, IN− = High, ICLAMP−OUT/OUTH = 500 mA (pulse test, tCLPmax = 10 µs) 10
Clamping Voltage, Sinking (VOUTL-VDD2) VCLAMP−OUTL 0.8 1.5 V IN+ = High, IN− = Low, ICLAMP−OUTL = 500 mA (pulse test, tCLPmax = 10 µs) 10
Clamping Voltage, Clamp (VCLAMP-VDD2, NCD57090A/D/F) VCLAMP−CLAMP 1.1 1.7 V IN+ = High, IN− = Low, ICLAMP−CLAMP = 500 mA (pulse test, tCLPmax = 10 µs) 10
IN+, IN− to Output High Propagation Delay tPD−ON−3.3 40 60 90 ns CLOAD = 10 nF; VDD1 = VIN+ = 3.3V, VIN− = 0 V 10
IN+, IN− to Output Low Propagation Delay tPD−OFF−3.3 40 60 90 ns CLOAD = 10 nF; VDD1 = VIN+ = 3.3 V, VIN− = 0 V 10
Propagation Delay Distortion (tPD−ON − tPD−OFF) tDISTORT -25 25 ns TA = −40°C to 125°C, PW > 150 ns 10
Prop Delay Distortion between Parts tDISTORT_TOT -30 0 30 ns PW > 150 ns 10
Junction-to-Air Thermal Resistance, SOIC-8 wide body (1-layer) RJA 156 °C/W 1-Layer PCB, see Note 5 7
Junction-to-Air Thermal Resistance, SOIC-8 wide body (4-layer) RJA 85 °C/W 4-Layer PCB, see Note 5 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ABS RIO Insulation Resistance at TS, VIO = 500 V 109 Table 3. ABSOLUTE MAXIMUM RATINGS (Note 1) 7

CAD (KiCad official)

  • Symbol: NCV57090ADWR2G
  • Footprint: Package_SO:SOIC-8_7.5x5.85mm_P1.27mm
  • 3D model: SOIC-8-300mil (KiCad packages3D, STEP)
  • 3D model files: ncv57090adwr2g-etched.step / ncv57090adwr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv57090adwr2g.step / ncv57090adwr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (26 pp, sha256 26abe74476d9160c, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF