main
Ray
Publish 0.1.0
8842401
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202
{
"slug": "ncv4263-2cpd50r2g",
"version": "0.1.0",
"type": "component",
"description": "onsemi Pre-ordered transistors, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"transistors",
"ncv4263-2cpd50r2g",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncv4263-2cpd50r2g.kicad_sym",
"ncv4263-2cpd50r2g.kicad_mod",
"ncv4263-2cpd50r2g.glb",
"ncv4263-2cpd50r2g.step",
"ncv4263-2cpd50r2g.lbr",
"docs/hero.png",
"docs/ncv4263-2cpd50r2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncv4263-2cpd50r2g-hero.glb",
"ncv4263-2cpd50r2g-hero.overlay.json",
"ncv4263-2cpd50r2g-etched.glb"
],
"component": {
"mpn": "NCV4263-2CPD50R2G",
"manufacturer": "onsemi",
"package": "SOIC-8-EP",
"pin_count": 9,
"category": "Transistors",
"subcategory": "Pre-ordered transistors",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncv4263-2cpd50r2-d.pdf",
"parts": {
"symbol": "ncv4263-2cpd50r2g.kicad_sym",
"footprint": "ncv4263-2cpd50r2g.kicad_mod",
"model_3d": "ncv4263-2cpd50r2g-hero.glb",
"model_3d_plain": "ncv4263-2cpd50r2g-etched.glb",
"model_3d_step": "ncv4263-2cpd50r2g-etched.step",
"model_3d_step_plain": "ncv4263-2cpd50r2g.step",
"lbr": "ncv4263-2cpd50r2g.lbr"
},
"distributor_links": {
"lcsc": "C603920",
"digikey": "NCV4263-2CPD50R2GOSTR-ND",
"mouser": "863-NCV42632CPD50R2G"
},
"distributor_check": {
"checked_at": "2026-10-25T19:06:47Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "NCV4263-2CPD50R2GOSTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "863-NCV42632CPD50R2G",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "Vin",
"type": "power_in",
"description": "Positive power supply input, to be decoupled with a ceramic capacitor to ground; operating input voltage range is 5.5 V to 40 V."
},
{
"number": "2",
"name": "EN",
"type": "input",
"description": "Enable input where a low level disables the chip (reducing quiescent current to a 10 µA maximum disable current); connect to Vin if the function is not needed."
},
{
"number": "3",
"name": "RO",
"type": "output",
"description": "Reset output, an open-collector output tied to Vout through an internal 30 kΩ pull-up resistor; leave open if the reset function is not needed."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Power supply ground; connect to the heat sink area at GND potential."
},
{
"number": "5",
"name": "D",
"type": "passive",
"description": "Delay timing pin; connect to GND via a ceramic capacitor to set the reset delay time and watchdog trigger time, or leave open if this function is not needed."
},
{
"number": "6",
"name": "RADJ",
"type": "input",
"description": "Reset adjust threshold input; connect to GND for the default reset threshold of 93% of Vout, or to an output voltage divider to adjust the threshold."
},
{
"number": "7",
"name": "WDI",
"type": "input",
"description": "Watchdog input; rising-edge triggered input for watchdog pulses, connected to GND if the function is not needed."
},
{
"number": "8",
"name": "Vout",
"type": "power_out",
"description": "Regulated 5 V output voltage; connect a Cout of at least 22 µF to ground."
},
{
"number": "9",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The exposed pad is listed in the pin table as 'EPAD' (connect to ground potential or leave unconnect; RO is described as an open-collector output with an internal pull-up; it is mapped to KiCad type 'ou; The D pin's KiCad class is not stated in the datasheet; 'passive' was chosen because it is a timing ",
"exposed pad 9 added from the footprint"
],
"pages_sent": 16,
"cost_usd": 0.0799,
"at": "2026-10-25T19:06:32"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncv4263-2cpd50r2-d.pdf",
"pages": 16,
"sha256": "191f55e942163290",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncv4263-2cpd50r2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.55
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
"checked": "2026-10-25",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncv4263-2cpd50r2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.55
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "c4cdbb8bbbcfcf8543eb797e06e2c41aeec33aa00798aaab391baba1e343a442",
"checked": "2026-10-25",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}