main
Ray Publish 0.1.0 8842401

NCV4263-2CPD50R2G

onsemi · Pre-ordered transistors · SOIC-8-EP

NCV4263-2CPD50R2G from onsemi, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vin power_in Positive power supply input, to be decoupled with a ceramic capacitor to ground; operating input voltage range is 5.5 V to 40 V.
2 EN input Enable input where a low level disables the chip (reducing quiescent current to a 10 µA maximum disable current); connect to Vin if the function is not needed.
3 RO output Reset output, an open-collector output tied to Vout through an internal 30 kΩ pull-up resistor; leave open if the reset function is not needed.
4 GND power_in Power supply ground; connect to the heat sink area at GND potential.
5 D passive Delay timing pin; connect to GND via a ceramic capacitor to set the reset delay time and watchdog trigger time, or leave open if this function is not needed.
6 RADJ input Reset adjust threshold input; connect to GND for the default reset threshold of 93% of Vout, or to an output voltage divider to adjust the threshold.
7 WDI input Watchdog input; rising-edge triggered input for watchdog pulses, connected to GND if the function is not needed.
8 Vout power_out Regulated 5 V output voltage; connect a Cout of at least 22 µF to ground.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8-EP
Category Transistors
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy Vout 4.9 5 5.1 V Vin = 6 V to 40 V, Iout = 5 to 150 mA 4
Line Regulation Regline -25 3 25 mV Iout = 150 mA, Vin = 6 V to 28 V 4
Load Regulation Regload -25 25 mV Iout = 5 mA to 150 mA 4
Dropout Voltage VDO 300 500 mV Iout = 150 mA 4
Disable Current IDIS 0.066 10 µA VEN = 0 V, TJ < 125°C 4
Quiescent Current Iq 0.275 1.3 mA Iout = 0 mA 4
Quiescent Current Iq 3 18 mA Iout = 150 mA 4
Quiescent Current Iq 11.3 23 mA Iout = 150 mA, Vin = 4.5 V 4
Current Limit ILIM 200 418 500 mA Vout = 0.96 x Vout_nom 4
Enable Input Current IEN 5 10 25 µA VEN = 5 V 4
Watchdog Input Low Time tWL 1 2 3.5 ms CD = 100 nF, Vout > VRT, no WDI signal 4
Watchdog Trigger Time tWTT 16 20.8 27 ms CD = 100 nF, Vout > VRT, no WDI signal 4
Charge Current ID_charge 40 66.8 95 µA VD = 1 V, no WDI signal 4
Discharge Current ID_disch 4.4 6.54 9.4 µA VD = 1 V, no WDI signal 4
Saturation Voltage VD_sat 6 100 mV Vout < VRT, no WDI signal 4
Switching Threshold Upper VthH(D) 1.45 1.7 2.05 V 4
Switching Threshold Lower VthL(D) 0.2 0.34 0.55 V 4
Output Voltage Reset Threshold VRT 90 93 96 % Vout Vout decreasing, VRADJ = 0 V 4
Reset Adjust Threshold Vth(RADJ) 1.26 1.36 1.44 V 70% of Vout_nom, Vout < (VRT) 4
Reset Adjustment Range VRT_range 70 93 % Vout 4
Reset Output Low Voltage VROL 0.01 0.4 V IRO = 1 mA 4
Reset Delay Time tRD 1.3 2.6 4.1 ms CD = 100 nF 4
Reset Reaction Time tRR 0.5 1.2 4 µs CD = 100 nF 5
Thermal Shutdown Temperature TSD 150 177 195 °C Iout = 1 mA 5
Input Voltage (absolute maximum) Vin -42 45 V 3
Enable Input Voltage (absolute maximum) VEN -42 45 V 3
Output Voltage (absolute maximum) Vout -1 7 V 3
Reset Output Voltage (absolute maximum) VRO -0.3 7 V 3
Watchdog Input Voltage (absolute maximum) VWDI -0.3 7 V 3
Reset Adjust Threshold Voltage (absolute maximum) VRADJ -0.3 7 V 3
Delay Timing Output Voltage (absolute maximum) VD -0.3 7 V 3
Maximum Junction Temperature (absolute maximum) TJ -40 150 °C 3
Storage Temperature TSTG -55 150 °C 3
ESD Capability, Human Body Model ESDHBM 2 kV AEC-Q100-002 (JS-001-2010) 3
ESD Capability, Charged Device Model ESDCDM 1 kV AEC-Q100-011 (EIA/JESD22-C101) 3
Lead Temperature Soldering Reflow (Pb-Free) TSLD 265 °C Reflow (SMD styles only), peak 3
Input Voltage (operating range) Vin 5.5 40 V 3
Junction Temperature (operating range) TJ -40 150 °C 3
Thermal Resistance, Junction-to-Air, SOIC-8 EP RθJA 65.1 °C/W Note 5: 645 mm2 (1 in2) 1 oz copper, FR4 PCB 3
Thermal Reference, Junction-to-Pad, SOIC-8 EP ψJPad 8.7 °C/W Note 5: 645 mm2 (1 in2) 1 oz copper, FR4 PCB 3

CAD (KiCad official)

  • Symbol: NCV4263-2CPD50R2G
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: ncv4263-2cpd50r2g-etched.step / ncv4263-2cpd50r2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv4263-2cpd50r2g.step / ncv4263-2cpd50r2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (16 pp, sha256 191f55e942163290, retrieved 2026-10-25, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF