main
Ray
Publish 0.1.0
41efa98
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176
{
"slug": "ncs2252sn2t1g",
"version": "0.1.0",
"type": "component",
"description": "onsemi Comparators, TSOP-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"amplifiers",
"ncs2252sn2t1g",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncs2252sn2t1g.kicad_sym",
"ncs2252sn2t1g.kicad_mod",
"ncs2252sn2t1g.glb",
"ncs2252sn2t1g.step",
"ncs2252sn2t1g.lbr",
"docs/hero.png",
"docs/ncs2252sn2t1g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncs2252sn2t1g-hero.glb",
"ncs2252sn2t1g-hero.overlay.json"
],
"component": {
"mpn": "NCS2252SN2T1G",
"manufacturer": "onsemi",
"package": "TSOP-5",
"pin_count": 5,
"category": "Amplifiers",
"subcategory": "Comparators",
"datasheet": "https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/812/NC%28S%2CV%292250%2C2.pdf",
"parts": {
"symbol": "ncs2252sn2t1g.kicad_sym",
"footprint": "ncs2252sn2t1g.kicad_mod",
"model_3d": "ncs2252sn2t1g-hero.glb",
"model_3d_plain": "ncs2252sn2t1g.glb",
"model_3d_step": "ncs2252sn2t1g-etched.step",
"model_3d_step_plain": "ncs2252sn2t1g.step",
"lbr": "ncs2252sn2t1g.lbr"
},
"distributor_links": {
"lcsc": "C892880",
"mouser": "863-NCS2252SN2T1G"
},
"distributor_check": {
"checked_at": "2026-11-20T23:23:41Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 930 calls left today"
},
"mouser": {
"pn": "863-NCS2252SN2T1G",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "OUT",
"type": "output",
"description": "Open-drain comparator output on the NCS2252, which requires an external pull-up resistor that may connect to voltages below VDD or up to VDD + 0.3 V."
},
{
"number": "2",
"name": "VSS",
"type": "power_in",
"description": "Negative supply pin; connect to ground or negative rail, with a bypass capacitor of at least 0.1 μF close to the pin if not connected to ground."
},
{
"number": "3",
"name": "IN+",
"type": "input",
"description": "Non-inverting input with rail-to-rail common mode range from VSS − 0.2 V to VDD + 0.2 V."
},
{
"number": "4",
"name": "IN−",
"type": "input",
"description": "Inverting input with rail-to-rail common mode range from VSS − 0.2 V to VDD + 0.2 V."
},
{
"number": "5",
"name": "VDD",
"type": "power_in",
"description": "Positive supply pin (1.8 V to 5.5 V); connect to positive rail with a bypass capacitor of at least 0.1 μF as close as possible to the pin."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin diagram on page 1 is extracted as text without explicit pin-number-to-name association. Pins"
],
"pages_sent": 12,
"cost_usd": 0.076,
"at": "2026-11-20T23:23:32"
},
"datasheet": {
"url": "https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/812/NC%28S%2CV%292250%2C2.pdf",
"pages": 12,
"sha256": "5600ff2f6674ceda",
"source_tier": "mfr",
"citation": "onsemi datasheet, copy hosted by DigiKey"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 5,
"described": 5,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncs2252sn2t1g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
3.05,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7bb4f709cbcec3383aaa7ba920208a4d73b376d9bb60806b65f21dbdb00a84b7",
"checked": "2026-11-20",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncs2252sn2t1g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
3.05,
1.1
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9121ff6b13cc22dcc06f983aebf3db58385f7eaa76c843b891c4b673bad7ac1b",
"checked": "2026-11-20",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}